COMMSCOPE BC-40-16D Pipe to Pipe Clamp Installation Guide
- September 7, 2024
- CommScope
Table of Contents
COMMSCOPE BC-40-16D Pipe to Pipe Clamp
Specifications
- Weight: 1.38 lbs, 6.73 lbs, 0.03 lbs, 0.04 lbs, 0.12 lbs
- Material: Galvanized steel
- Dimensions: Height 22.0 in, Length 16.0 in, Width 11.5 in
Product Usage Instructions
General Notes
All metric dimensions are in brackets [X.X]. For patent information, visit https://www.cs-pat.com.
Design Notes
Identify any hazards or obstructions to the climbing facility and safety climb before installation. Additional products may be needed to maintain safety. Take precautionary measures during installation to preserve the climbing facility and safety climb.
Manufacturing/Special Requirements
Tighten all bolts securing flat plates using the turn-of-nut method. Tighten all U-bolts using the turn-of-nut method, ensuring equal distance and force on each leg of the U-bolt.
Packaging
The packaging should meet CommScope requirements per document IS-PL-3005. Printed documents should be placed inside a polybag and then in a shipping container. Extra hardware may be supplied, bagged, and shipped.
FAQ
- Q: Are the components provided for assembly purposes?
- A: Yes, the component part numbers are provided for assembly purposes. Individual components may be shipped as parts within an included kit.
- Q: Where can I find the weight and quantity of each part?
- A: The weight and quantity of each part are listed in the table under the part number description section.
- Q: What is the material of the product?
- A: The product is made of galvanized steel.
GENERAL NOTES
- ALL METRIC DIMENSIONS ARE IN BRACKETS [X. X]
- FOR PATENT INFO: https://www.cs-pat.com
DESIGN NOTES
- ANY HAZARDS OR OBSTRUCTIONS TO THE CLIMBING FACILITY AND SAFETY CLIMB MUST BE IDENTIFIED PRIOR TO INSTALLING THE APPURTENANCE. ADDITIONAL PRODUCTS MAY BE REQUIRED TO MAINTAIN THE INTEGRITY OF THE SAFETY CLIMB. DURING INSTALLATION, TEMPORARY AND/OR PERMANENT PRECAUTIONARY MEASURES SHOULD BE TAKEN TO PRESERVE THE CLIMBING FACILITY AND/OR SAFETY CLIMB.
MANUFACTURING/SPECIAL REQUIREMENTS
- TIGHTEN ALL BOLTS SECURING FLAT PLATES BY THE TURN-OF-NUT METHOD. TIGHTEN ALL U-BOLTS USING THE TURN-OF-NUT METHOD WITH ATTENTION TO LEAVING EQUAL DISTANCE AND EQUAL FORCE ON EACH LEG OF THE U-BOLT.
TEST
PACKAGING
- PACKAGING SHALL MEET COMMSCOPE REQUIREMENTS PER DOCUMENT IS-PL-3005
- PRINTED DOCUMENT TO BE PLACED INSIDE POLYBAG AND THEN IN SHIPPING CONTAINER
- EXTRA HARDWARE MAY BE SUPPLIED, BAGGED AND SHIPPED
Dimension
PART NUMBER
REVISIONS
Documents / Resources
|
COMMSCOPE BC-40-16D Pipe to Pipe
Clamp
[pdf] Installation Guide
BC-40-16D, BC-40-16D Pipe to Pipe Clamp, BC-40-16D, Pipe to Pipe Clamp, to
Pipe Clamp, Pipe Clamp, Clamp
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>