Shenzhen K16 Wireless Earbuds User Manual

Shenzhen K16 Wireless Earbuds User Manual

Packing List

Package Contents:

A. Earbud x 2 (L&R)

B. Charging Case x 1

C. USB C Charging Cable x 1

D. User Manual x 1

Warm Tips:

• Please clean 1he charging oontacts and eartip mesh with Ellcohol pads regularly to remove dust or earwax that may affect the charging or volume.
• Please take gaod care of yoor earphones, lost earphones will not be covered by the warranty.
• If there arc any questions In the manual that are list ansvvered, please check the producl description on Amazon or contact our store a.1stomer service team.

Product Overview

1. Charging Case
2. Charging Case Digital Display
3. Earphone Digdal Display
4. Charging Terminal
5. Earphone Indicator Light
6. Touch Button
7. Microphone
8. UR Indicator
9. Type-C Charging Port

Power On

Power Off

Wear

4. Take breaks: Wearing earbuds for an extended period of time can be uncomforlable and potentiaJly harmful to your ears. Make sure to take breaks every few hours to give your ears a rest.

Pairing

Phone cans Control

Music

Active Siri

Reset Earbuds

Charging

NOTE:

• Please separate the charging cable and earphone when fully charged.
• 5V adapter is the best choice for charging to avoid battery damage. Improper current and voltage may damage earbuds and charging case and thus warranty is not valid.

Specification

Q & A

Safety Instruction

Pay close attention to the surrounding traffic when using it on foot. It may cause traffic accidents.

• Reduce the volume to a minimum before use. Sudden loud noises can damage your hearing.
• To protect your ears, do not turn the volume up too high.
• Stop using this product if it fal s into flammable or liquid (such as water). Continued use may result in fire, malfunction or electric shock.
• Opening the inside may resu t in malfunction or electric shock.
• Do not touch the inside. Also, we cannot guarantee performance if the interior has been manually modified.
• Do not charge with wet hands or touch the charging port
• This may result in electric shock
• If you feel uncomfortable whi e using this product, stop using it immediately.
• If you are using a medical device such as a pacemaker, consult your doctor before using it
• Do not allow small children to use it.

Warning

This device comp ies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference.
(2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the imits for a Class B digital device, pursuant to Part 1 5 of the FCC Rules. These imits are designed to  provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Asking for more help

If none of the above solutions work or if you receive your package with missing parts or other problems not mentioned, please follow the steps below to contact brand support for further assistance:

1. Go to the Amazon website and log in to your account.
2. Click on the “Orders” button located on the top right corner of the screen
3. Locate the order that you need help with and click on the “Contact Seller” button.
4. Choose the reason for your inquiry from the drop-down menu and provide a brief description of your issue.
5. Click on the “Send” button to submit your message to us.
6. A ternatively, you can also go to the seller’s storefront on Amazon and c ick on the “Ask a Question” button ocated on the top right corner of the screen. This wi allow you to send a message directly to us.

• It is recommended to be as clear and concise as possible when describing your problem to us, as this will help us understand your problem and provide you with the best solution.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>