Generic WHFC002 Laurel 2 Piece Bedroom Nightstand Set Instruction Manual

WHFC002 Laurel 2 Piece Bedroom Nightstand Set

Specifications:

• Product: Nightstand

• Tools Required: Phillips head screwdriver, Flat head
  screwdriver, Hammer

• Additional Tools Recommended: Electric screwdriver

• Surface Requirement: Flat, smooth surface (cardboard or
  rug)

Product Usage Instructions:

1. What will you need?

Hi! My name is Armando, and I’ll guide you through assembling
this nightstand. Make sure you have the following tools:

• Phillips head screwdriver
• Flat head screwdriver
• Hammer
• A flat, smooth surface (cardboard or rug)
• Electric screwdriver (optional but recommended)

2. Where should you start?

It is crucial to begin correctly. Check the panel and hardware
content to ensure everything is in order before starting
assembly.

3. What’s in the hardware bag?

The hardware bag includes wood dowels, spreading bolts, Minifix
cams, cover caps, slides + screws, drywall screws, and wheel
casters. Ensure you have all components before starting
assembly.

4. How do the dowels and Minifix system work?

Wood dowels are used to join panels together by inserting them
into designated holes and gently hitting them until fully inserted.
The Minifix system consists of spreading bolts and Minifix cams
which should be inserted correctly to secure joints.

5. Let’s start assembling!

Follow the assembly steps outlined in the manual carefully.
Ensure proper installation of drawer slides and panels as per the
instructions provided.

6. Slide Installation:

1. Take out the smaller part of the slide and push down the black
   plastic part.

2. Place the bigger part of the slide over the panel with the
   plastic stop towards the back.

3. Repeat steps if needed for additional slides.

7. Final Steps:

1. Turn over panels carefully as instructed.

2. Place smaller parts of slides over panels with metallic stops
   positioned correctly.

3. Slide the back panel into the grooves for assembly
   completion.

FAQ:

How much weight can the cabinet resist?

The nightstand can resist a maximum weight of [insert weight
limit here]. Please avoid exceeding this limit to maintain the
integrity of the product.

How to take care of the cabinet?

To ensure longevity, avoid placing excessive weight on the
nightstand, clean with a damp cloth, and avoid direct sunlight
exposure to prevent damage.

ASSEMBLY INSTRUCTIONS
NIGHTSTAND
It’s much better if you get some company for this!

LOT N°

Index

What will you need?

2

Where should you start?

3

What’s in the hardware bag?

4

How do the dowels and Minifix system work?
(We also explain what they are)

5-6

Let’s start assembling!

7

How much weight does your cabinet resist?

16

Our last recommendations for taking care of your cabinet

17

What will you need?

Hi! my name is Armando, and I’ll be with you while you assemble this cabinet.

Phillips head screwdriver Flat head screwdriver Hammer

A flat, smooth surface. You can use the cardboard of the box or a rug.
An electric screwdriver isn’t necessary, but it can make the work much easier 🙂
2

Where should you start?
This is so IMPORTANT!
Over the next few pages is the panel and hardware content for this
cabinet. Please make sure that the quantity
of each one is correct, and that everything is in good shape.
(When the cabinet is already assembled there’s no warranty for this)
Panel quantity

A – x1 E – x1 I – x1

B – x1 F – x1 J – x1

C – x1 G – x1 K – x1

D – x1 H – x1 L – x1

3

What’s in the hardware bag?

Wood dowel
x22

Spreading bolt
x24

Minifix cam
x24

Cover caps
x24

2″

Slides + screw
x1

Drywall screw
x4

Wheel Caster
x4

Flat head screw
x16

Be careful!, try not to lose anything from this bag, its content is necessary for assembling your cabinet. 4

How do the dowels and Minifix system work?
this is so important too!
Everytime you’re using one of these connectors during the assembly, you
should follow these same steps.

Wood dowels
They are little wooden cylinders.

When joining two

1

Put in the dowel

2

inside the indicated

panels together, don’t forget to gently hit

hole and softly hit it

the panels to adjust

until it’s fully inside.

the joint.

Minifix system
It’s a joint compound of two parts: a spreading bolt and a Minifix cam.

1

small arrow
This is a Minifix cam.

3

It has a little arrow on its

upper surface.

This is a spreading bolt. You should put it with the black plastic part facing down.

2

You should insert these cams

with the little arrow pointing towards the drilling on the

4

panel’s edge (shown on the

left).

After joining two panels together you should turn the
cams 180° with a phillips head screwdriver to adjust
and secure the joint.

5

1 Let’s start assembling!
You can see the last page of this manual to have a full look of the panels of this cabinet.
F
2
J
6

3
E
4
F J
E
7

5 Drawer slides installation (apply for steps 5 and 7)
To begin, you must take out the smaller part of the slide, pushing down the black plastic part shown below:
Take the bigger part of the slide and place it over the panel. The plastic stop shoud go towards the back.

Front

Front
6

FE J
C
8

7 If you want to recall how to install this part of the slides, go to the 5th step again.
D
8
D FE
J C
9

7
A
Turn this panel over
8
A
10

7
D
J A
Turn over the cabinet
very carefully!
8
B
11

7

8

Take tha smaller part of the

slide and place it over the

panel. The metallic stop

should go at the front.

1

Front Frente

8

H
12

7

Take tha smaller part of the slide and place it over the

panel. The metallic stop

should go at the front.

1

Front Frente

8

8

Drywall screw 2″
13

7

8

Slide the back panel inside the grooves.

14

9
Slide the drawer inside the cabinet.

After adjusting all the Minifix cams, cover
them up with the cover caps.

A

After finishing the assembly, lift off al the
adhesive letters.

15

How much weight does my cabinet resist?
5
5
5
*weight in pounds
Congratulations! It’s done
But don’t go yet!
There are some recommendations left for you to take care of your cabinet
correctly from now on.
SUPER IMPORTANT!
We suggest fixing the cabinet to the wall, so we can avoid the cabinet tipping and harming anyone. Be specially careful with the kids.
16

Taking care of your cabinet:
Do not paint the cabinet. The cabinet it’s exclusively for indoor spaces. Do not expose it to the direct sun. Clean the metallic hardware with a dry cloth. DO NOT overload the cabinet (see suggested loads) Do not hit or hammer the cabinet (only when indicated here). Clean it with thinner, a soft soap solution or simply a damp cloth. Don’t drag the cabinet, lift it up with other people. Avoid direct contact with water, fire or exposing it to high heat.
Cabinet panels

B

I

H

E

L

GC

J

K

F

D

A
17

WARRANTY POLICY
PÓLIZA DE GARANTÍA
Furniture has a 3 year warranty coverage in wooden parts and 1 year warranty coverage in hardware pieces since its manufacturing date, which you can see in the lot number printed on the product box and the assembly instructions leaflet. Warranty covers materials and workmanship imperfections which impair the assembly or correct functioning of the cabinet. This warranty is not valid if the defects or imperfections are caused by the incorrect following of the assembly instructions, warnings and recommendations, misuse, intentional damage, fire or flood, or after modifications or any kind of alteration, or repaired by someone not authorized, when it´s been assembled 3 months after the date of purchase. These defects MUST be reported before the warranty coverage period ends. Once the product has been assembled, the company will not be responsible for defective and/or damaged parts. This warranty is ONLY valid for the ORIGINAL PURCHASER, it doesn’t apply if the product has been resold, rented, etc. Furniture will take no liability for incidental or consequential damages caused to or by the product (This may not apply in your state). To make this warranty valid you must write to our customer service email describing the product defect, lot number and submitting your sales reciept or proof of purchase, or contact us at our customer service line. Replaced parts will be under the product´s original warranty coverage period. Damaged parts will become property of the company. There are no other warranties applicable to this product.
18

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>