Generic DD7-Mini Zello Walkie Talkie User Manual
- June 3, 2024
- Generic
Table of Contents
Generic DD7-Mini Zello Walkie Talkie
Please create Zello account for the first use.
Turn on the Bluetooth on your mobile phone (Android must turn on GPS)> Open
the Zello APP Main menu/Options) >Push-to-talk buttons Add New Device) >Press
the DD7-MINI key once)> Click new device (CHILOKI-PTT))> Back to previous menu
Finish.
PTT Test: Select Zello APP Contact/Echo)> press the DD7-MINI button)> the Screen button change to red)> The button is working.
Please read this user manual carefully before using the DD7-MINI wireless PTT button.
BUTTON TECH SPECS
Function Description
INSTRUCTIONS
Battery charging
- in paired mode, press and hold DD7-MINI button, the red-light breathing, indicate the battery level low.
- When charging the battery, the indicator light shows green and light off when charging completed.
Note: The battery provides approximately:
- *Cumulative PTT time: 450 min
- %Connection standby time: 500 hours
- *Unconnected standby time: 8 months
Please do not use non-original charging cables for charging!
Pairing DD7-MINI
Press DD7-MINI button, the red-light flashes quickly indicate in pairing mode,
or after 40 sec will automatic into sleep mode.
Wake up DD7-MINI
When the DD7-MINI is in the deep sleep state, short press the PTT button once.
When the red light of the status indicator flashes quickly, it indicates that
is has been wakened and entered the pairing
connection state.
Deep Sleep Mode
When the DD7-MINI is unconnected, it will automatically enter the deep sleep
state after 40 secs.
FUNCTION OPERATION AND STATUS LIST
DD7-MINI PRODUCT SPEC
- Model: Bluetooth Button
- Bluetooth specifications: V5.0
- Frequency range: 2402-2480MHz
- Effective use range: Within 10 meters
- Battery capacity: 50mA
- Charging voltage: 5V 100mA
- Charging time: 1-1.5 hours
- Cumulative PTT time: 450 min
- Connected standby time: 500 hours
- Unconnected standby time: 8 months
- Working temperature:- 20°C-60°C
- Warranty period: 1 year
*The above time may be changed due to your settings or personal usage habits.
Scan QR Code for more information
FCC Warning
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the users authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interferencee received,
including interference that may cause undesired operation. This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not ocCur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>