tp-link TC40 2.0 Outdoor Pan Tilt Security Wi-Fi Camera User Guide
- September 9, 2024
- tp-link
Table of Contents
TC40 2.0 Outdoor Pan Tilt Security Wi-Fi Camera
“`html
Product Specifications
- Product: Outdoor Pan/Tilt Security Wi-Fi Camera
- LEDs: 1 White Light, 2 IR
- Additional Features: Microphone, Speaker
- Storage: microSD Card Slot (card not included)
- Power: DC Power Connector
Product Usage Instructions
1. Set Up Your Camera
Follow these steps to set up your camera:
-
Download the Tapo App from the App Store or Google Play, or
scan the QR code. -
Log in with your TP-Link ID or create an account if you don’t
have one. -
Add your camera by tapping the “Add Device” button in the app
and following the setup instructions.
2. Install a microSD Card
To install a microSD card for local recording:
-
Rotate the camera downwards and open the silicone cover to
access the microSD card slot. -
Insert the microSD card carefully in the correct direction
until you hear a click.
3. Mount Your Camera
To mount your camera on a wall or ceiling:
-
Affix the camera and bracket by routing the power cord through
the bracket opening and using screws. -
Stick the mounting template to the desired location and drill
holes accordingly. -
Insert mounting anchors, affix the camera and bracket over them
using screws.
Frequently Asked Questions (FAQ)
Q: Is the camera waterproof?
A: The camera is not waterproof when set on a table or shelf. It
should be mounted using Option 1-3 when installed outdoors.
“`
User Guide
Outdoor Pan/Tilt Security Wi-Fi Camera
©2024 TP-Link 1910013780 REV2.0.0
Contents
About This Guide
··········································································· 1
Introduction
······················································································
2 Appearance
······················································································
3 Set Up Your
Camera····································································· 5
Install a microSD
Card································································· 6 Mount
Your
Camera······································································ 7
Install Waterproof
Items·························································· 10
Authentication··············································································
11
About This Guide
This guide provides a brief introduction to the Outdoor Pan/Tilt Security Wi-
Fi Camera and the Tapo app, as well as regulatory information.
Please note that features available in Tapo may vary by model and software
version. Tapo availability may also vary by region. All images, steps, and
descriptions in this guide are only examples and may not reflect your actual
Tapo Camera experience.
Conventions
In this guide, the following convention is used:
Convention Description
Blue
Key information appears in blue, including management page text such as menus, items, buttons and so on.
Underline Hyperlinks are in blue and underlined. You can click to redirect to a website.
Note:
Ignoring this type of note might result in a malfunction or damage to the device.
More Info
· Specifications can be found on the product page at https://www.tapo.com. ·
Our Technical Support and troubleshooting information can be found at
https://www.tapo.com/support/. · The setup video can be found at https://www
.tp-link.com/support/setup-video/#cloud-cameras.
1
Introduction
Outdoor Pan/Tilt Security Wi-Fi Camera is a full-featured weatherproof
security camera that you can access from anywhere. Receive instant
notifications and check feeds when the motion is detected. Moreover, the
automatic siren system will trigger light and sound to frighten away unwanted
visitors after the camera detects motion. Day or night, rain or shine, the
Tapo camera protects what you love most. · Smart Motion Tracking Tracks and
follows a subject smartly, keeping it within the camera’s field of view. ·
1080p Full HD Live View Reveals sharp images and vivid details. · Patrol
Mode Keep the camera cruise between two customized points for dynamic
monitoring. · Person Detection Notifies you when a person is detected. ·
Local* and Cloud Storage Save recorded videos to an installed microSD card
(up to 512 GB)*, or use Tapo Care* cloud storage service.
microSD card must be purchased separately. Subscribe for cloud storage at https://www.tapo.com/tapocare/ · IP65 Weatherproof Offers excellent waterproof and dustproof performance for outdoor scenarios. · Customizable Sound Alarm Record your own audio as an alarm to extend your usage. · Color Night Vision Enhances your security by revealing vivid colors with built-in spotlights. · Two-Way Audio Communicate remotely with a delivery person in real time. · Multiple Installation Options Use the mounting screws, template and loops to install on any wall, ceiling or pole for the perfect view. Mounting loops purchased separately.
2
Appearance
67
1 White Light LEDs 2 IR LEDs 3 Lens 4 System LED 5 Microphone
6 Reset
3
microSD
1
4
7 microSD Card Slot 8 Speaker
2
5
8
9
9 DC Power Connector
Reset Button Open the silicone cover. While the camera is powered on, use a pin to press and hold the RESET button to reset the camera. · Press and hold for 5s: Reset Wi-Fi settings only · Press and hold for 10s: Reset to factory settings
microSD Card Slot Open the silicone cover and insert a microSD card. Initialize it on the Tapo app for local recording. microSD card not included.
DC Power Connector
Used to connect to the provided DC power adapter 3
System LED Indication
Solid red Blinking red and green Blinking red slowly Solid amber Solid green Blinking red quickly Blinking green quickly
Starting up Ready for setup Connecting to Wi-Fi Connected to Wi-Fi Connected to the cloud Camera resetting Camera updating
4
Set Up Your Camera
Follow the steps below to get started with your new camera.
Step 1. Download Tapo App
Get the Tapo app from the App Store or Google Play, or by scanning the QR code
below.
Step 2. Log In
Open the app, and log in with your TP-Link ID. If you don’t have an account,
create one first.
Step 3. Add Your Camera
Tap the button > Add Device in the app and search for your model. Follow app
instructions to complete the setup.
OR
5
Install a microSD Card
Follow the steps below to install the microSD card for local recording. You can go to Camera Settings > microSD Card in the Tapo app to check the card status or format your card.
1. Manually rotate the camera downwards. Open the silicone cover to find the microSD card slot.
2. Identify the direction of the microSD card and carefully insert the card into the slot. Push in the card until you hear a clicking sound.
microSD 6
Mount Your Camera
When you finish adding your camera in the Tapo app, you can mount it on a wall
or ceiling with the provided mounting template and screws. You can also mount
it on the pole with mounting loops. Follow the steps below to mount your new
camera.
Note: The camera is not waterproof when set on a table or shelf. Mount the
camera via Option 1-3 when installing outdoors.
Option 1: Wall Mount
1. Affix the Camera and Bracket Route the camera power cord through the
opening of the bracket. Use two bracket screws to affix the bracket and the
camera.
3. Mount the Camera
Insert four mounting anchors into the holes, then use the mounting screws to
affix the camera and bracket over the anchors.
2. Drill Holes
Stick the mounting template to the desired mounting place. Drill four screw
holes according to the template.
=6 mm (15/64 in.)
4. Power Up the Camera
Connect the camera to a power outlet using the provided power adapter. Install
the waterproof seal for the power connectors.
Male Power Connector Waterproof Seal Female Power Connector
7
Option 2: Overhang Mount
1. Affix the Camera and Bracket Route the camera power cord through the
opening of the bracket. Use two bracket screws to affix the bracket and the
camera.
3. Mount the Camera
Insert four mounting anchors into the holes, then use the mounting screws to
affix the camera and bracket over the anchors.
2. Drill Holes
Stick the mounting template to the desired mounting place. Drill four screw
holes according to the template.
=6 mm (15/64 in.)
4. Power Up the Camera
Connect the camera to a power outlet using the provided power adapter. Install
the waterproof seal for the power connectors.
Male Power Connector Waterproof Seal Female Power Connector
8
Option 3: Pole Mount
1. Affix the Camera and Bracket Route the camera power cord through the
opening of the bracket. Use two bracket screws to affix the bracket and the
camera.
2. Mount the Camera Mount the camera on the pole using two pole-mounting
loops (loop width 12mm).
Pole-mounting loops are not included.
Pole-mounting loops
3. Power Up the Camera
Connect the camera to a power outlet using the provided power adapter. Install
the waterproof seal for the power connectors.
Male Power Connector Waterproof Seal Female Power Connector
9
Install Waterproof Items
When the camera is installed outdoors, please install waterproof items to
waterproof your camera. Make sure each part is securely attached and the
water-proofing rings are flush to keep out water. Follow the steps below to
install waterproof items.
Install Waterproof Seal for Power Connectors
Connect the camera to a power outlet using the provided power adapter. Install
the waterproof seal for the power connectors when the camera is installed
outdoors.
Male Power Connector Waterproof Seal Female Power Connector
10
Authentication
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.
OPERATING FREQUENCY (the maximum transmitted power)
2412MHz–2472MHz (20dBm)
EU Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/53/EU,
2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU Declaration of
Conformity may be found at https://www.tapo.com/en/support/ce/.
RF Exposure Information
This device meets the EU requirements (2014/53/EU Article 3.1a) on the
limitation of exposure of the general public to electromagnetic fields by way
of health protection. The device complies with RF specifications when the
device used at 20 cm from your body.
UKCA Mark
11
UK Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of the Radio Equipment Regulations
2017. The original UK Declaration of Conformity may be found at
https://www.tapo.com/support/ukca/.
Korea Warning Statements:
.
12
NCC Notice & BSMI Notice
· · · · · · · 40
Outdoor Pan/Tilt Security Wi-Fi Camera Equipment name
TC40 Type designation (Type)
Unit
PCB
Lead (Pb)
Restricted substances and its chemical symbols
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent chromium (Cr+6)
Polybrominated biphenyls
(PBB)
Polybrominated diphenyl ethers
(PBDE)
13
–
–
1. 0.1 wt % 0.01 wt %
Note 1″Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the
percentage content of the restricted substance exceeds the reference
percentage value of presence condition.
Note 2″” indicates that the percentage content of the restricted substance
does not exceed the percentage of reference value of presence.
3.-
Note 3The “-” indicates that the restricted substance corresponds to the exemption.
, .
14
Safety Information
· Keep the device away from fire or hot environments. DO NOT immerse in water
or any other liquid. · Do not attempt to disassemble, repair, or modify the
device. If you need service, please contact us. · Do not use damaged charger
or USB cable to charge the device. · Do not use any other chargers than those
recommended · Do not use the device where wireless devices are not allowed. ·
Adapter shall be easily accessible. · Use only power supplies which are
provided by manufacturer and in the original packing of this product. If you
have any questions, please don’t
hesitate to contact us. · Adapter should be used indoors where the ambient
temperature is lower than or equal to 40ºC. · This product uses radios and
other components that emit electromagnetic fields. Electromagnetic fields and
magnets may interfere with pacemakers
and other implanted medical devices. Always keep the product and its power
adapter more than 15 cm (6 inches) away from any pacemakers or other implanted
medical devices. If you suspect your product is interfering with your
pacemaker or any other implanted medical device, turn off your product and
consult your physician for information specific to your medical device. ·
Operating Temperature: -30 ºC ~ 60 ºC (-22°F ~ 140°F ) · Adapter should be
used indoors where the ambient temperatureis lower than or equal to 40°C.
Please read and follow the above safety information when operating the device.
We cannot guarantee that no accidents or damage will occur due to improper use
of the device. Please use this product with care and operate at your own risk.
15
Explanation of the symbols on the product label
Symbols may vary from products Symbol Class II equipment Class II equipment
with functional earthing Alternating current DC voltage Polarity of output
terminals Indoor use only Dangerous voltage Caution, risk of electric shock
Energy efficiency Marking Protective earth
Earth
Explanation
Frame or chassis 16
Symbol
Functional earthing
Explanation
Caution, hot surface Caution Operator’s manual
Stand-by
“ON”/”OFF” (push-push)
Fuse
Fuse is used in neutral N RECYCLING This product bears the selective sorting
symbol for Waste electrical and electronic equipment (WEEE). This means that
this product must be handled pursuant to European directive 2012/19/EU in
order to be recycled or dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization
or to the retailer when he buys a new electrical or electronic equipment.
Caution, avoid listening at high volume levels for long periods
Disconnection, all power plugs 17
Symbol m µ
Explanation Switch of mini-gap construction Switch of micro-gap construction
(for US version) Switch of micro-gap / micro-disconnection construction (for
other versions except US)
Switch without contact gap (Semiconductor switching device)
18
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>