GEAR WRENCH A140 Vehicle Communication Interface User Guide

: September 5, 2024
: GEAR WRENCH

Table of Contents

Product Walkaround
Getting Started
FCC Statement
ISED Statement
Read User Manual Online (PDF format)
Download This Manual (PDF format)

GEAR WRENCH A140 Vehicle Communication Interface

IMPORTANT: Before using the device, please read the precautions in this operating guide or the user manual thoroughly. Improper operation or use in an unsuitable environment may result in personal loss and void the warranty.

Product Walkaround

OBO Port
Indicator light
Product lnformation

Scan the below QR code to download the free GWSMARTBT app

|
---|---
|

SCAN TO LEARN MORE

BALAYER POUR EN SAVOIR PLUS

Apex Tool Group, LLC.
1000 Lufkin Road, Apex NC 27~9
diagnosticsupport@gearwrench.com
1-Sn-626-343.3
wwwgearwrench.com

Getting Started

Connect the Vehicle Control Interface [VCI] to the vehicle’s OBDII port.
Open the system settings on your mobile device and tap on Bluetooth. Look for a device with a name that matches the S/N on your GWSMARTBT. Tap on it to pair with the device.
Start the GWSMARTBT app and enter the serial number (S/N] of your device, the activation code from your Product Identification Information card, and your preferred username, email address, and password. After entering this information, hit the ‘Activation’ button to finalize your device’s registration.
Navigate to the ‘More’ section within the GWSMARTBT app, select ‘Settings’, then ‘Bluetooth’. Locate the device you’ve recently paired; it will be indicated by a blue light, signaling a successful connection. Once this is confirmed, you’re all set for diagnostics.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Th is equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help .

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired o peration.

RF Exposure Information

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

ISED Statement

English: This device contains licence-exempt transmitter(s)/receiver(s) tl1at comply with Innovation, Science and Economic Development Canada’ s licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).

This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

This radio transmitter has been approved by Industry Canada to operate with the antenna types listed with the maximum permissible gain indicated. Antenna types not included in this list, having again greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.