Xhorse 2AI4T-XKHO XKHO Universal Remote Key User Manual

June 1, 2024
Xhorse

Xhorse 2AI4T-XKHO XKHO Universal Remote Key

Specifications:

  • Model: XKHO Universal Remote Key
  • Battery Type: 2032, 3V
  • Frequency Band: RFID (433.92 MHz)
  • Max Power: -37.80 dBm

Product Information

The XKHO Universal Remote Key is a versatile remote key that allows users to control various functions of their car, including locking, unlocking, and opening the trunk. The remote key operates at a frequency of 433.92 MHz and uses a 2032 3V battery.

Product Usage Instructions

Changing the Battery:

  1. Break open the back side plastic cover to access the battery compartment.
  2. Remove the old battery and replace it with a new 2032 3V battery, ensuring the correct orientation of the positive and negative terminals.

Pairing Method:

  1. Take out the battery and replace it with a new one following the steps mentioned above.
  2. Pair the remote key with your vehicle by referring to the corresponding vehicle models for matching.
  3. Install the key back into the remote as before.

FAQ

Q: What should I do if my remote key is not working?

A: If the remote key is not working, try replacing the battery with a new one following the instructions provided. Ensure the correct pairing method with your vehicle.

Overview

XKHO Universal Remote Key is suitable for vehicle which contains the Xhorse receiver.
Note: The operating temperature of the product is -20–50℃.

Button description

Xhorse-2AI4T-XKHO-XKHO-Universal-Remote-Key-fig-1

Change battery

First use or when the battery runs out need to change new battery, following steps:

  1. Break open the back side plastic cover to open the remote

  2. Take the battery out and replace new one
    Note: The battery type is 2032 with 3V, ensure the positive and negative of battery is correct.

  3. Install the key same as before

Xhorse-2AI4T-XKHO-XKHO-Universal-Remote-Key-fig-2

Pairing method

Pairing with vehicle: Referring to the corresponding vehicle models to match.

FCC statements

Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Information to user.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Information to the user.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

CE & UKCA statements:

Frequency Band(s)
This device operates with the following frequency bands and maximum frequency power.
Note: The product is compliant with these power limits required by the European Union. Frequency bands support-ed by the product vary by model.
RFID (433.92 MHz) Max Pe.r.p. is -37.80 dBm.

EU & UKCA DECLARATION OF CONFORMITY

Hereby, Shenzhen Xhorse Electronics Co., Ltd. declare that Universal Remote Key with model XKHO is in compli-ance with Directive 2014/53/EU, 2011/65/EU and RER 2017 (SI2017/1206).

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Xhorse User Manuals

Related Manuals