CORNING Everon 6200 DAS Wireless Technology Owner’s Manual

: September 5, 2024
: Corning

Table of Contents

CORNING Everon 6200 DAS Wireless Technology
Product Usage Instructions
Features
Specifications
System Topology
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CORNING Everon 6200 DAS Wireless Technology

Specifications :

Supported Bands: Band 600MHz, 700 LU, 700MHz LUPS, 850E MHz, 1900MHz, 2100MHz, 2300MHz, 2500MHz, TDD C-Band-1
3GPP Bands: Band 71, 12 & 13, 12 & 13 & 14, 26, 25, 66E, 30, 41, n78
Downlink Frequencies: 617-652, 729-756, 728-768, 859-894, 1930-1995, 2110-2200, 2350-2360, 2496-2690, 3450-3800

Product Usage Instructions

Installation:

Ensure the socket-outlet is easily accessible for the device.
Keep a minimum distance of 20cm between the device’s radiator and your body during installation.

Electrical Information:

Maximum Power Consumption: AC Power / DC Power

Maintenance :

Use the provided Dry contact Alarms to monitor the device’s status.

Mechanical Details :

Dimensions: Width: 440mm, Height: 88mm, Depth: 329mm, Weight: 8.0kg

FAQ :

Q: What should I do if the device is not powering on?
A: Check the AC/DC power source and ensure it is connected properly. If the issue persists, contact customer support.
Q: How can I monitor the device’s output power?
A: Use the AU-AC power level (dB) interface to monitor the input power range for each port.

Everon 6200
A3-E3-N3 Specification Sheet

Features

1200MHz Transmission Bandwidth over 1 fiber| 8 x 3GPP Band per Remote
Sub 6GHz| Up to 200MHz IBW
Dry contact Alarm| 25dBm Maximum Output Power per Band
Support Band or Channel Selective filter| Cascading up to 6 levels

E62-A3 – Access Unit Chassis

The E62-A3 – Access Unit Chassis is a standard 19-inch 2U rack-mounted shelf (1U fan unit included), which serves as the host for Everon™ 6200. The E62-A3 provides coupling access to radio signal sources of multi-operator, multi-system, and multi-band, forming digital optical signals and distributing static capacity distribution to fiber-connected other type devices. One A3 supports up to eight optical interfaces connected to E3s (Expansion Unit) or N3RUs (Remote Unit).
This document describes the installation procedure for the E62-N3 remote unit.
This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC License to operate this device. NOTE: Only authorized person can enter the area where the antenna is installed. And the person is fully aware of the potential for exposure and can exercise control over his or her exposure by leaving the area or by some other appropriate means. Awareness of the potential for RF exposure in a workplace or similar environment can be provided through specific training as part of a RF safety program.
This device must be professionally installed.

E62-AU-AC – Active Combiner Module

The E62-AU-AC – Active Combiner Module is the interface to the operator base station signal source equipment. Each module has four QMA ports for signal input from the maximum four operators. One Access Unit can be equipped with up to four modules. In accordance with wireless service provider standards, it is not advised to use digital repeaters as a signal source for Corning solutions.

E62-E3-O – Expansion Unit

The E62-E3-O – Expansion Unit is a standard 19-inch 1U rack-mounted shelf, which serves as the interface between the Primary A3 and the Remote Unit for the capacity expansion of system.

E62-N3RU – Low Power Remote Unit

The E62-N3RU is a low-power remote unit supporting cellular technologies on fiber optic cable using the CPRI protocol. The N3 is ideal for multi-operator multi-band, static capacity distribution deployments of cellular services in small-to-medium coverage areas. The N3 supports up to four 25 dBm RF channels. The N3 converts an optical signal to RF and then transmits at the relevant 3GPP band and receives the analog RF signal, conditions it, and converts it back to optical for routing to the E3 or A3.

The socket-outlet shall be easily accessible.
Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Specifications

E62-A3 – Access Unit Chassis

Supported Bands| | | |
---|---|---|---|---
Band| 3GPP Band| Downlink| Uplink| Max IBW
600MHz| 71| 617-652| 663-698| 35
700 LU| 12 & 13| 729-756| 699-716 & 777-787| 27
700MHz LUPS| 12 & 13 & 14| 728-768| 698-716 & 776-798| 40
850E MHz| 26| 859-894| 814-849| 35
1900MHz| 25| 1930-1995| 1850-1915| 65
2100MHz| 66E| 2110-2200| 1710-1780| 90
2300MHz| 30| 2350-2360| 2305-2315| 10
2500MHz TDD| 41| 2496-2690| 2496-2690| 194
C-Band-1| n78| 3450-3800| 3450-3800| 200
C-Band-2| n77| 3700-3980| 3700-3980| 200
---|---|---|---|---
Interface|
---|---
Access Unit RF Interface| QMA Female

Optical Connector Type

| 8 x 25 GBps SFP+ Interfaces

6 to 8 optical connections to E3-O or N3

2 optical connections to Secondary A3s

Transmission Rate| 25 GB/s
AU-AC modules| 4 x AU-AC modules per chassis (RF interface with BTS) Full 3GPP Band per Module (up

to 200 MHz)

Band Support| 12x 3GPP bands over 1 fiber core (using 2 x Secondary A3)
Dry contact Alarms| 1x RJ45 (2x in, 2x out)
Maintenance Interface| Ethernet RJ45
AU-AC power level (dB)| 0dBm to +15 dBm Input Power Range for each port
Electrical|
---|---
Electromagnetic

Compatibility/Interference (EMC/EMI)

| 3GPP TS38.113
Maximum Power Consumption| 85W
AC Power| 100-240v AC, 50/60Hz
DC Power| 48VDC ± 20%
Environmental|
---|---
Mean Time Between Failure (MTBF)| > 220,000 hours
Operating Temperature| -10°C to +45°C
Storage Temperature| -40°C to +85°C
Humidity| 0% to 90% (Noncondensing)
Cooling| Active
Installation| Wall or 19-in Rack
Ingress Protection Rating| IP30 (Indoor)
Mechanical

AU (Width / Height / Depth / Weight)| 440mm / 88mm / 329mm / 8.0kg

17.32in / 3.46in / 12.95in / 17.64lb

E62-E3-O – Expansion Unit

Interface|
---|---
Optical Connector Type| 16 x 25 GBps SFP+ Interfaces 14x optical connections to N3RU

1x optical connection to Primary A3 or upper level E3

1x optical connection to lower level E3

Transmission Rate| 25 GB/s
Cascading| Up to 5 x E3-O per Optical connection
Dry contact Alarms| 1x RJ45 (2x in, 2x out)
Maintenance Interface| Ethernet RJ45
Electrical|
---|---
Electromagnetic

Compatibility/Interference (EMC/EMI)

| 3GPP TS38.113
Maximum Power Consumption| 65 W
AC Power| 100-240 VAC, 50/60 Hz
DC Power| 48VDC ± 20%
Environmental|
---|---
Mean Time Between Failure (MTBF)| > 220,000 hours
Operating Temperature| -10°C to +45°C
Storage Temperature| -40°C to +85°C
Humidity| 0% to 90% (Noncondensing)
Cooling| Passive
Installation| Ceiling or Wall
Ingress Protection Rating| IP30 (Indoor)
Mechanical|
---|---

N3 (Width / Height / Depth / Weight)
Integrated Antenna Version

|

310 mm / 83 mm / 310 mm / 4.5 kg
12.20 in / 3.27 in / 12.20 in / 9.92lb
N3 (Width / Height / Depth / Weight)
External Antenna Version

|

310 mm / 83 mm / 310 mm / 4.5 kg
12.20 in / 3.27 in / 12.20 in / 9.92lb

Regulation

FCC, UL62368-1, UL 2043

System Topology

Corning Optical Communications LLC • 4200 Corning Place • Charlotte, NC 28216 USA
800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/opcomm
Corning Optical Communications reserves the right to improve, enhance, and modify the features and specifications of Corning
Optical Communications products without prior notification. A complete listing of the trademarks of Corning Optical Communications is available at www.corning.com/opcomm/trademarks. All other trademarks are the properties of their respective owners. Corning Optical Communications is ISO 9001 certified. © 2020 Corning Optical Communications. All rights reserved.
Corning Optical Communications
E62-A3-E3-N3 Specification Sheet | 28 March 28, 2022 | Page 9