QAZQA 94881 Hoodi HL Medium Copper Lamp Instruction Manual

94881 Hoodi HL Medium Copper Lamp
Instruction Manual

94881 Hoodi HL Medium Copper Lamp

SAFETY INSTRUCTION

Please study the instruction monuol and beLcw information carefully before installing al using this product. Please keep this user monuol for further reference

1. The luminaires may only be installed by authorized and qualified technicians according the valid regulations for electrical installation.
2. Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.
3. The electrical supply must be switched off of the outset, preferably by means of o switch in the distribution box, before any installation, maintenance or repair work is undertaken.
4. Exterior lighting must not be installed during rain.
5. Take account of the minimal separation distance from other obiects and the room required around the fitting.
6. If in any doubt, consult o professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
7. Clomping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
8. Clean with o clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
9. Take account of all available technical information.
10. Meoning of symbols:
    |  For indoor use only, where direct contact with water is impossible
    ---|---
    IPXX| This icon indicates the level of water-proof and dust-proof
    | Protection Class I: the fitting must be earthed
    | Protection Class the fining is doubled insulated and does not require earthing
    | Protection Class III: the fining is low voltage
    | Minimum distance from lighted objects (meters)
    | The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceed; different items require different kind of light sources with different bulb icons
    | The armature is designed to work only with the indicated voltage. Different items require different working voltage.
    | The luminaire can be used in combination with a dimmer
    | The reference light angle and light space of the luminoire
    | This luminoire cannot be disposed together with normal domestic waste in standard rubbish con, but you have to bring it to o staging area for electrical waste
11. Take note of the symbols when connecting wires:

FittinQ B.V.
Smaragdweg 52, 5527
LB Hopert
The Netherlands
www.qazqa.n1

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>