MACHENIKE M7 Pro Wireless Gaming Mouse User Guide

MACHENIKE M7 Pro Wireless Gaming Mouse

LAYOUT

Mode Introduction

• Wireless 2.4GHz Mode
• Wired Mode

Connecting Your Mouse

A. Via Wired Mode
Connect the mouse to any of your PC’s USB ports using the charging cable to use it in wired mode. Upon startup, all LEDs will remain lit.

DPI Indicators :
3104 Version : The scroll wheel light will indicate the corresponding DPI value: 800 (red) – 1600 (green) – 2400 (blue – default value) – 3200 (purple) – 4000 (orange). The mouse logo light and front LED lights will be in a single-color steady mode. (The driver can adjust the DPI to a maximum of 8000.)

3395 Version :The scroll wheel light will indicate the corresponding DPI value: 800 (red) – 1600 (green) – 2400 (blue – default value) – 3200 (yellow) – 6400 (pink) ‒ 26000(orange). The LEDs on the left and right sides of the bottom of the mouse are in a flowing light mode.

B. Via 2.4GHz Wireless Mode

1. Push the slider switch to the wireless mode.
2. Connect the Wireless Dongle of your mouse to your PC’s USB ports.
3. After the connection is established, all LEDs will remain lit and other functions will remain the same.

Parring

1. In 2.4G mode, after the mouse completes its startup, press the Wheel Click + left + right buttons to enter the parring mode.
2. The scroll wheel light will blink yellow (1 blink per second), and will continue blinking for 3 minutes.
3. Then, insert the receiver into the USB port on your computer (the distance between the receiver and the mouse should be within 20cm).
4. Then, insert the receiver into the USB port on your computer (the distance between the receiver and the mouse should be within 20cm).

For more parameter and mode adjustments, please visit https://global.machenike.com/ and download the driver for the Mechanic M7 Pro Dual-mode mouse to make the settings.

Lighting

The mouse’s atmosphere light defaults to a steady single-color mode.
Wheel Click+Back Button : Switch lighting mode (color steady (default), single-color flashing , single-color breathing, single-color cycling breathing, and off.) Wheel Click+Back Button : Adjust the color in single- color mode.
For more settings, please visit https://global.machenike.com/ to download the Mechanic M7 Pro dual-mode mouse driver and configure your preferences.

Power Saving Mode

Under the 2.4G wireless mode, the tail ambient light of the mouse cursor will turn off to save power when the cursor is moved; the light will resume when the cursor stops (this can be disabled in the driver).

Sleep Mode

In 2.4G mode and 2.4G power-saving mode, the mouse will enter sleep mode if it is not used for 3 minutes.
In 2.4G mode, the LED light on the mouse will turn off and enter a light sleep mode, which will be automatically awakened by movement. After 30 minutes, it will enter a deep sleep mode and can be awakened by clicking any button. There is no sleep function in wired mode.

Charging

When the voltage is below 3.5V, the low battery indicator light (the battery indicator light is an ice blue light and the scroll wheel is a red light) will flash (two flashes per second).
When the voltage drops below 3.2V, the mouse will automatically shut down. The charging voltage supports up to 10V; the charging current should not exceed 1A.

Technical Specification

Troubleshooting

• No response when clicking/moving the mouse:
  It may be that the USB interface is not connected to the computer. Please confirm that the mouse is connected to the computer.

• Mouse moves too slow or too fast:
  It may be that the DPI setting does not match personal preferences. Adjust DPI to suit personal preferences.

• If there are any issues that cannot be resolved, please do not attempt to dismantle the mouse. Please contact the seller for assistance.

Packing Contents : M7PRO Mouse, 2.4GHz Wireless Dongle , Data Cable , User Manual

If there are any issues that cannot be resolved, please contact the seller for assistance.

Fcc Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement The device can be used in portable exposure condition without restriction

References

• 北京房产网_北京二手房|租房|新房|房地产信息网【北京贝壳】
• Machenike Official Website | As Cool As You Are – Machenike Official Store

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>