kopul XLRTWIST 360 Series Rotating Angled XLR Adapter User Manual
- September 6, 2024
- kopul
Table of Contents
kopul XLRTWIST 360 Series Rotating Angled XLR Adapter
Instructions
Male and Female XLR connectors can be rotated to four preset angles: up, down, left, and right.
Rotating the Female XLR Connector:
-
Use a small Phillips screwdriver to remove the screw on the adapter’s female XLR connector.
-
Gently pull the connector from the housing, and rotate it to one of the preset slots at 90°, 180°, or 270°. Then press the connector back into the adapter.
-
Replace and tighten the screw into the appropriate hole.
Rotating the XLR Male to 1/4 Male Connector
-
Use a small Philips screwdriver to remove the screw between the left and right arrows.
-
Gently pull the female connector out of the housing. Rotate it to one of the preset holes at 90°, 180°, or 270°. Then press the connector back into the adapter.
-
Replace and tighten the screw.
Rotating the XLR Male to 1/4 Female Connector and XLR Male to XLR Female Connector
-
Use a small Philips screwdriver to remove the screw.
-
Use needle-nose pliers to gently pull the connector from the housing, and rotate it to one of the preset slots at 90°, 180°, or 270°.
-
Press the connector back into the adapter, and replace and tighten the screw in the appropriate hole.
Important! Do not rotate the connectors more than 360°.
When setting the connector back to its original position, rotate it back in the opposite direction to prevent cable strain.
One-Year Limited Warranty
This KOPUL product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vey from state to state.
To obtain warranty coverage, contact the Kopul Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Kopul along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.kopulcables.com or call Customer Service at 212-594-2353. Product warranty provided by the Gradus Group. www.gradusgroup.com KOPUL is a registered trademark of the Gradus Group. © 2024 Gradus Group LLC. All Rights Reserved.