kopul DAN-2X2UAC Dante analog output adaptor User Manual
- August 9, 2024
- kopul
Table of Contents
kopul DAN-2X2UAC Dante analog output adaptor
Product Information
Specifications
- Product Models: DAN-2X2UAC, DAN-AOXM2, DAN-AIXF2
- Maximum Signal Level (Balanced): DAN-AIXF2: +24 dBu, DAN-AOXM2: +18 dBu
- Output Gain: DAN-AOXM2: -6 dBu
- Frequency Response: Provided in manual
- Impedance: DAN-AIXF2 (Input): 20k (balanced), 10k (unbalanced); DAN-AOXM2 (Output): 150 (balanced), 75 (unbalanced)
- Dynamic Range: >100 dB
- Signal-to-Noise Ratio: >100 dB
- Total Harmonic Distortion: Provided in manual
- Connectors: Provided in manual
- Power: Provided in manual
- Power Consumption: Provided in manual
- Sample Rates: Provided in manual
- Bit Depth: Provided in manual
- Latency: Provided in manual
- Network Transport Protocol: Provided in manual
Product Usage Instructions
DAN-AIXF2
The DAN-AIXF2 is designed for connecting output devices to your Dante
network. Follow these steps to use it:
- Locate the two female XLR connectors on the DAN-AIXF2.
- Connect the output devices such as analog mixers, DI boxes, or keyboard instruments to the XLR connectors.
- Ensure proper impedance matching for balanced or unbalanced connections.
- Connect the DAN-AIXF2 to your Dante network using an Ethernet cable.
DAN-AOXM2
The DAN-AOXM2 is ideal for connecting analog gear to your Dante network.
Here’s how to use it:
- Locate the two male XLR connectors on the DAN-AOXM2.
- Connect analog gear like power amplifiers, powered speakers, or analog compressors and equalizers to the XLR connectors.
- Make sure to set the appropriate gain levels for your equipment.
- Connect the DAN-AOXM2 to your Dante network via Ethernet.
DAN-2X2UAC
The DAN-2X2UAC is compatible with USB-A or USB-C devices. Follow these
steps to use it:
- Connect your USB-A or USB-C device to the DAN-2X2UAC.
- Check the LED indicators on the adapter for status information.
- If using Dante Controller functions, follow the instructions provided in the manual for identification and upgrades.
Frequently Asked Questions (FAQ)
- Q: What do the LED indicators on the adapter signify?
A: The yellow and green LEDs on the adapter’s ethernet port indicate various statuses such as Function, Power On, Data Traffic, System Ready, Identify (Dante Controller function), and Upgrade (bootloader). Refer to the manual for detailed explanations of each status.
Dante Adapters
User Manual
DAN-2X2UAC / DAN-AOXM2 / DAN-AIXF2
-
Thank you for choosing Kopul.
- The Kopul Dante Adapters let you connect analog and digital gear to your existing Dante network. The adapters are instantly recognized by the Dante network and expand it to include legacy audio gear as well as computers, laptops, and smartphones. They’re road-ready and made to deliver bit-perfect audio reproduction with very low latency and sample-accurate synchronization across your network. These plug-and-play adapters support Dante Audio over IP and AES67 RTP transport formats, and they’re compatible with Dante Domain Manager.
-
DAN-AIXF2
The DAN-AIXF2 features two female XLR connectors and is ideal for connecting output devices like analog mixers, DI boxes, keyboard instruments, and other audio outboard gear to your Dante network. -
DAN-AOXM2
The DAN-AOXM2 Analog Output Adapter features two male XLR connectors and allows you to connect analog gear like power amplifiers, powered speakers, and analog compressors and equalizers to your Dante network. -
DAN-2X2UAC
The DAN-2X2UAC lets you connect any computer, laptop, tablet, or smartphone to the Dante network with 2×2 channels of bidirectional audio. Use this adapter with any DAW to play into and record from your Dante network without any additional software. It’s also ideal for audio applications like conferencing software with network-connected speakers, microphones, and mixers.
LED Indicators
The LEDs on the adapter’s ethernet port indicate the following status:
| Function | Yellow LED | Green LED |
|---|---|---|
| Power On | Steady | – |
| Data Traffic | Flashing | – |
| System Ready | – | Steady |
| Identify (Dante Controller function) | – | Flashing |
Upgrade (bootloader)
6
| –| Flashing
Specifications
DAN-AIXF2, DAN-AOXM2
Maximum Signal Level (Balanced)| DAN-AIXF2: +24 dBu
DAN-AOXM2: +18 dBu
---|---
Output Gain| DAN-AOXM2: -6 dBu
Frequency Response| 20 Hz to 20 kHz (±0.5 dB)
Impedance| DAN-AIXF2 (Input): 20 kΩ (balanced),
10 kΩ (unbalanced) DAN-AOXM2 (Output): 150 Ω (balanced),
75 Ω (unbalanced)
Dynamic Range| >100 dB
Signal-to-Noise Ratio| >100 dB
| 7
Total Harmonic Distortion| <0.01% at +4 dBu
---|---
Connectors| RJ45
DAN-AIXF2: XLR-F (×2)
DAN-AOXM2: XLR-M (×2)
Power| 802.3af PoE
Power Consumption| DAN-AIXF2: 3.15 W (max) DAN-AOXM2: 2.6 W (max)
Sample Rates| 44.1, 48, 96 kHz
Bit Depth| 24-bit
Latency| 1, 2, or 5 ms (configurable with Dante Controller)
Network Transport Protocol| Dante Audio over IP / AES67 RTP
Construction| ABS
---|---
Dimensions| 4.5 × 1.1 × 1.1 in. (11.4 × 2.8 × 2.8 cm)
Cable Length| 9 in. (22.9 cm)
Weight| 5.6 oz. (159 g)
DAN-2X2UAC
| Audio Channels | 2 Inputs, 2 Outputs |
|---|---|
| Connectors | 1 × RJ45 Female, |
1 × USB Type-C Female
USB| USB 2.0
Sample Rate| 48 kHz
Bit Depth| 24-bit
Latency| 1, 2, or 5 ms (configurable with Dante Controller)
---|---
Network Transport
Protocol
| Dante Audio over IP, AES67 RTP
Power Requirement| 802.3af PoE or USB
Enclosure Material| ABS
Dimensions (L × W × H)| 4.5 × 1.1 × 1.1 in. (11.4 × 2.8 × 2.8 cm)
Included Cable| USB Standard-A to USB Type-C USB Type-C to USB
Type-C
Cable Length| 7 in. (17.8 cm)
Weight| 2.3 oz. (65 g)
One-Year Limited Warranty
- This KOPUL product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.
- This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
- PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.
- To obtain warranty coverage, contact the Kopul Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Kopul along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
- For more information or to arrange service, visit www.kopulcables.com or call Customer Ser vice at 212-594-2353. Product warranty provided by the Gradus Group. www.gradusgroup.com
- KOPUL is a registered trademark of the Gradus Group. © 2024 Gradus Group LLC. All Rights Reserved.