kopul XLR4F-RJ45 4 Channel XLR Network Cable Extender User Manual
- June 12, 2024
- kopul
Table of Contents
kopul XLR4F-RJ45 4 Channel XLR Network Cable Extender
Product Information
| Product Name | 4-CHANNEL XLR NETWORK CABLE EXTENDER |
|---|---|
| Model Numbers | XLR4F-RJ45, XLR4M-RJ45 |
| Connections | Option 1: Connect multiple microphones to a back-of-room sound |
board.
Option 2: Connect multiple microphones to the control room and a
multitrack recorder.
Option 3: Connect a DMX controller to multiple DJ or theater
lights.
Supported Signal Types| Analog Audio, AES/EBU, DMX
Supported Cable Types| Cat 5, Cat 5e, Cat 6, Cat 7
Material| Steel
Color| Black
Weight| XLR4M-RJ45: 16 oz. (450 g)
XLR4F-RJ45: 16 oz. (450 g)
Warranty| One-Year Limited Warranty provided by the Gradus Group.
This warranty does not cover damage or defect caused by misuse,
neglect, accident, alteration, abuse, improper installation, or
maintenance.
Product Usage Instructions
- Option 1: Connect multiple microphones to a back-of-room sound board.
- Use XLR4F-RJ45 connectors to connect the microphones to the XLR NETWORK CABLE EXTENDER.
- Connect the XLR NETWORK CABLE EXTENDER to a back-of-room soundboard using an EtherCON/Ethernet female cable.
- Option 2: Connect multiple microphones to the control room and a multitrack recorder.
- Use XLR4F-RJ45 connectors to connect the microphones to the XLR NETWORK CABLE EXTENDER.
- Connect the XLR NETWORK CABLE EXTENDER to the control room and a multitrack recorder using an EtherCON/Ethernet female cable.
- Option 3: Connect a DMX controller to multiple DJ or theater lights.
- Use XLR4F-RJ45 connectors to connect the DMX controller to the XLR NETWORK CABLE EXTENDER.
- Connect the XLR NETWORK CABLE EXTENDER to multiple DJ or theater lights using an EtherCON/Ethernet female cable.
For more information or to arrange service, visit www.kopulcables.com or call Customer Service at 212-594-2353.
Thank you for choosing Kopul.
Kopul’s XLR to RJ45 Network Cable Extenders send clean and interference-free
signals to sound boards, PA systems, multitrack recorders, and DMX-equipped
lights, even if they’re hundreds of feet away. Take them wherever you set up,
and replace heavy, bulky, and expensive audio and DMX snakes with affordable
ethernet or etherCON cables. These passive network extenders require no
external power to operate. When they’re connected with a Cat 5, 5e, 6, or 7
ethernet cable, they provide four channels of balanced mic level, AES/EBU, and
DMX signals, and extend the length of your cable runs without interference,
signal loss, or added coloration. Gold-plated XLR connecters assure superb
signal transfer and resist corrosion, and durable steel construction stands up
to demanding travel and studio environments.
Connections
- Connect the XLR4M-RJ45 and XLR4F-RJ45 with a Cat 5, 5e, 6, or 7 ethernet cable. EtherCON cables provide a locking metal shell that protects the RJ45 connector.
- The XLR4M-RJ45 and XLR4F-RJ45 work with dynamic and condenser microphones.
- Condenser microphones can receive phantom power only over shielded Cat 6 or Cat 7 ethernet cables.
- The XLR4M-RJ45 and XLR4F-RJ45 are compatible with DMX lights and controllers, as well as pro audio components that output an AES/EBU signal.
Option 1: Connect multiple microphones to a back-of-room sound board.
Option 2: Connect multiple microphones to the control room and a multitrack recorder.
Option 3: Connect a DMX controller to multiple DJ or theater lights.
Specifications
- Inputs: XLR4F-RJ45: 3-pin XLR female (×4)
- Output: XLR4M-RJ45: 3-pin XLR male (×4)
- Link: EtherCON / Ethernet female
- Power Source: Passive
- Signal: Analog Audio, AES/EBU, DMX
- Supported Cable Types: Cat 5, Cat 5e, Cat 6, Cat 7
- Material: Steel
- Color: Black
- Dimensions (W × D × H): 7.64 × 1.97 × 1.89 in. (19.4 × 5 × 4.8 cm)
- Weight: XLR4M-RJ45: 16 oz.(450 g) , XLR4F-RJ45: 16 oz.(450 g)
One-Year Limited Warranty
This KOPUL product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Kopul Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Kopul along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.kopulcables.com or call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group. www.gradusgroup.com
KOPUL is a registered trademark of the Gradus Group. © 2023 Gradus Group LLC. All Rights Reserved.