MAGMATIC RSJ150 Javelin Professional Fog Machine User Manual
- September 5, 2024
- MAGMATIC
Table of Contents
- RSJ150 Javelin Professional Fog Machine
- Specifications
- Product Information
- General Information
- Customer Support
- Contact Information for Support:
- Safety Guidelines
- Installation
- Operation
- Remote Device Management (RDM)
- Q: Can the JAVELIN be used by individuals without professional
- Q: Where can I find additional support for the JAVELIN?
RSJ150 Javelin Professional Fog Machine
“`html
Specifications
- Product Name: JAVELIN
- SKU: RSJ150
- UPC#: 810008261545
- DMX Channel Mode: 1 / 4 / 7 / 12 Channels
Product Information
General Information
The JAVELIN is a professional lighting device intended for use
by trained personnel only. It comes with a twist-locking power
cable.
Customer Support
For any product-related service and support needs, contact
MAGMATIC customer service. You can also visit
forums.elationlighting.com for questions, comments, or
suggestions.
Contact Information for Support:
-
ELATION SERVICE USA – Monday – Friday 8:00am to 4:30pm PST:
323-582-3322 | Fax: 323-832-9142 | Email:
sales@magmaticeffects.com -
ELATION SERVICE EUROPE – Monday – Friday 08:30 to 17:00 CET:
Voice +31 45 546 85 63 | Fax +31 45 546 85 96 | Email:
support@elationlighting.eu
Product Usage Instructions
Safety Guidelines
Before operating the JAVELIN, carefully read and understand the
safety guidelines provided in the manual. Ensure that the device is
used in a safe environment and by trained professionals only.
Installation
Follow the installation instructions provided in the manual.
Ensure proper rigging and assembly of the product.
Operation
To operate the JAVELIN, refer to the Operation section in the
manual. Familiarize yourself with the control panel and system menu
for optimal performance.
Remote Device Management (RDM)
Learn how to utilize the Remote Device Management feature by
referring to the RDM section in the manual.
FAQ (Frequently Asked Questions)
Q: Can the JAVELIN be used by individuals without professional
training?
A: No, the JAVELIN is intended for use by professionally trained
personnel only and is not suitable for private use.
Q: Where can I find additional support for the JAVELIN?
A: For product-related service and support needs, contact
MAGMATIC customer service or visit forums.elationlighting.com.
“`
JAVELIN
User Manual
US SKU#: UPC#:
RSJ150 810008261545
©2023 MAGMATIC EFFECTS all rights reserved. Information, specifications,
diagrams, images, and instructions herein are subject to change without
notice. MAGMATIC EFFECTS logo and identifying product names and numbers herein
are trademarks of MAGMATIC EFFECTS. Copyright protection claimed includes all
forms and matters of copyrightable materials and information now allowed by
statutory or judicial law or hereinafter granted. Product names used in this
document may be trademarks or registered trademarks of their respective
companies and are hereby acknowledged. All non-MAGMATIC brands and product
names are trademarks or registered trademarks of their respective companies.
MAGMATIC EFFECTS and all affiliated companies hereby disclaim any and all
liabilities for property, equipment, building, and electrical damages,
injuries to any persons, and direct or indirect economic loss associated with
the use or reliance of any information contained within this document, and/or
as a result of the improper, unsafe, insufficient and negligent assembly,
installation, rigging, and operation of this product.
MAGMATIC EFFECTS | 6122 S. Eastern Ave. | Los Angeles, CA. 90040
323-582-3322 |
323-832-9142 fax |
www.elationlighting.com | sales@magmaticeffects.com
Elation Professional B.V. | Junostraat 2 | 6468 EW Kerkrade, The Netherlands
+31 45 546 85 66 | +31 45 546 85 96 fax | www.elationlighting.eu |
info@elationlighting.eu
Elation Professional Mexico | AC Santa Ana 30 | Parque Industrial Lerma,
Lerma, Mexico 52000 +52 728-282-7070
DOCUMENT VERSION
Due to additional product features and/or enhancements, an updated version of
this document may be available online. Please check www.elationlighting.com
for the latest revision/update of this manual before beginning installation
and/or programming.
Date
Document Software Version Version >
10/14/20
1.0
1.0
12/11/20
1.1
1.0
02/26/21
1.2
N/C
03/12/21
1.3
N/C
08/18/21
1.4
N/C
08/25/21
1.5
N/C
03/21/22
1.6
N/C
05/25/22
1.7
N/C
10/04/22
1.8
N/C
12/02/22
1.9
N/C
12/27/23
2.0
N/C
DMX Channel Mode
1 / 4 / 7 / 12 Channels 1 / 4 / 7 / 12 Channels
No Change
No Change
No Change
No Change No Change No Change No Change No Change No Change
Notes
Initial Release Added Fog Burst to Specifications Updated Dim Drawings &
Specifications Updated Specifications, added Optional Accessories, Added FCC
Statement Added Operation section, updated Safety Guidelines and
Specifications. Updated Optional Accessories. Updated Specifications Page
Updated System Menu, Specifications Updated Specifications Added RDM Updated
Specifications
2
CONTENTS
General Information
4
Limited Warranty (USA Only)
5
Warranty Returns (USA Only)
6
Safety Guidelines
7
Overview
9
Installation
10
Operation
11
Remote Device Management (RDM)
12
Control Panel
13
System Menu
14
DMX Channel Functions & Values
18
LED Layout
19
Macros Table
20
Color List
21
Dimensional Drawings
22
Trouble Shooting | Cleaning & Maintenance
23
Specifications
24
FCC Statement
25
3
GENERAL INFORMATION
INTRODUCTION Please read and understand the instructions in this manual
carefully and thoroughly before attempting to operate this device. These
instructions contain important safety and use information. This product is
intended to be used by professionally trained personnel only and is not
suitable for private use.
UNPACKING Every device has been thoroughly tested and has been shipped in
perfect operating condition. Carefully check the shipping carton for damage
that may have occurred during shipping. If the carton is damanged, carefully
inspect the device for damage, and be sure all accessories necessary to
install and operate the device have arrived intact. In the event that damage
has been found or parts are missing, please contact our customer support team
for further instructions. Please do not return this device to your dealer
without first contacting customer support. Please do not discard the shipping
carton in the trash. Please recycle whenever possible.
BOX CONTENTS Twist-locking power cable
CUSTOMER SUPPORT Contact MAGMATIC customer service for any product related
service and support needs. Also visit forums.elationlighting.com with
questions, comments, or suggestions.
ELATION SERVICE USA – Monday – Friday 8:00am to 4:30pm PST
323-582-3322 | Fax
323-832-9142 |
sales@magmaticeffects.com ELATION SERVICE EUROPE – Monday – Friday 08:30 to
17:00 CET Voice: +31 45 546 85 63 | Fax: +31 45 546 85 96 |
support@elationlighting.eu
REPLACEMENT PARTS: Please visit parts.elationlighting.com
IMPORTANT NOTICE!
THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS UNIT. DO NOT ATTEMPT ANY
REPAIRS YOURSELF. DOING SO WILL VOID YOUR MANUFACTURER’S WARRANTY. DAMAGES
RESULTING FROM MODIFICATIONS TO THIS FIXTURE AND/OR THE DISREGARD OF SAFETY
INSTRUCTIONS AND GUIDELINES IN THIS MANUAL VOID THE MANUFACTURER’S WARRANTY
AND ARE NOT SUBJECT TO ANY WARRANTY CLAIMS AND/OR REPAIRS.
NEVER POINT OR AIM A FOG MACHINE TOWARDS PEOPLE OR THEIR CLOTHING. THIS UNIT
EMITS HOT VAPOR AND SHOULD BE USED WITH THE SAME CARE THAT YOU WOULD OBSERVE
WHEN USING AN ELECTRIC KETTLE OR IRON.
4
LIMITED WARRANTY (USA ONLY)
A. Magmatic Effects hereby warrants, to the original purchaser, Magmatic
products to be free of manufacturing defects in material and workmanship for a
period of two years (730 days) from the original date of purchase. This
warranty excludes discharge lamps and all product accessories. This warranty
shall be valid only if the product is purchased within the United States of
America, including possessions and territories. It is the owner’s
responsibility to establish the date and place of purchase by acceptable
evidence, at the time service is sought.
B. For warranty service, send the product only to the Magmatic Effects
factory. All shipping charges must be pre-paid. If the requested repairs or
service (including parts replacement) are within the terms of this warranty,
Magmatic Effects will pay return shipping charges only to a designated point
within the United States. If any product is sent, it must be shipped in its
original package and packaging material. No accessories should be shipped with
the product. If any accessories are shipped with the product, Magmatic Effects
shall have no liability what so ever for loss and/or or damage to any such
accessories, nor for the safe return thereof.
C. This warranty is void if the product serial number and/or labels are
altered or removed; if the product is modified in any manner which Magmatic
Effects concludes, after inspection, affects the reliability of the product;
if the product has been repaired or serviced by anyone other than the Magmatic
Effects factory unless prior written authorization was issued to purchaser by
Magmatic Effects; if the product is damaged because not properly maintained as
set forth in the product instructions, guidelines and/or user manual.
D. This is not a service contract, and this warranty does not include any
maintenance, cleaning or periodic check-up. During the periods as specified
above, Magmatic Effects will replace defective parts at its expense, and will
absorb all expenses for warranty service and repair labor by reason of defects
in material or workmanship. The sole responsibility of Magmatic Effects under
this warranty shall be limited to the repair of the product, or replacement
thereof, including parts, at the sole discretion of Magmatic Effects. All
products covered by this warranty were manufactured after January 1, 1990, and
bear identifying marks to that effect.
E. Magmatic Effects reserves the right to make changes in design and/or
performance improvements upon its products without any obligation to include
these changes in any products theretofore manufactured.
F. No warranty, whether expressed or implied, is given or made with respect to
any accessory supplied with the products described above. Except to the extent
prohibited by applicable law, all implied warranties made by Magmatic Effects
in connection with this product, including warranties of merchantability or
fitness, are limited in duration to the warranty periods set forth above. And
no warranties, whether expressed or implied, including warranties of
merchantability or fitness, shall apply to this product after said periods
have expired. The consumer’s and/or dealer’s sole remedy shall be such repair
or replacement as is expressly provided above; and under no circumstances
shall Magmatic Effects be liable for any loss and/or damage, direct and/or
consequential, arising out of the use of, and/or the inability to use, this
product.
G. This warranty is the only written warranty applicable to Magmatic Effects
products and supersedes all prior warranties and written descriptions of
warranty terms and conditions heretofore published.
5
WARRANTY RETURNS (USA ONLY)
To obtain warranty service, a Return Material Authorization (RMA) number must
first be obtained from MAGMATIC. It is the Customer’s responsibility to
provide product proof of purchase and serial number by acceptable evidence
such as an invoice copy or an approved MAGMATIC Extended Warranty Certificate
(“EWC”) and any relevant maintenance records at the time warranty service is
sought. Failure to provide acceptable evidence of product proof of purchase or
EWC and any relevant maintenance records may be cause for denial of warranty
service. Products returned for warranty service must be sent without any
accessories (i.e., power, data, and safety cables, brackets, clamps, rigging
hardware, frost filters, gel frames, barn doors, lenses, hoses, nozzles, rack
mounting hardware, etc.), must be boxed using the original and/or suitable
packaging materials (double-box and foam) that provides ample product
protection for ground and/or air freight transit, and must be shipped freight
pre-paid and insured to MAGMATIC in Los Angeles, CA or a MAGMATIC Authorized
Service Center. The RMA number must be clearly written on the outside of the
return box, and a brief description of the problem and the RMA number must be
documented and included in the box. Products returned for warranty service
without an RMA number clearly marked on the outside of the package will be
refused and returned to the shipper at the Customer’s expense. Products
returned for warranty service, which are received damaged due to inadequate
and/or improper packaging and/ or due to damage caused by the shipping
carrier, may incur additional repair charges before warranty service begins
and/or may void this warranty. If any product accessories (included and/or
optional) are shipped with the product, MAGMATIC and/or the MAGMATIC
Authorized Service Center shall have no liability what so ever for the loss
and/or damage to any such accessories, nor the safe return thereof. If the
requested warranty repairs or service (including parts replacement) are within
the terms of this warranty, MAGMATIC will pay return ground transportation
shipping charges to a single designated point within the United States.
6
SAFETY GUIDELINES
This fixture is a sophisticated piece of electronic equipment. To guarantee
smooth operation, it is important to follow all instructions and guidelines in
this manual. Magmatic Effects is not responsible for injury and/or damages
resulting from the misuse of this fixture due to the disregard of the
information printed in this manual. Only qualified and/or certified personnel
should perform installation of this fixture and only the original rigging
parts included with this fixture should be used for installation. Any
modifications to the fixture and/or the included mounting hardware will void
the original manufacturer’s warranty and increase the risk of damage and/or
personal injury.
PROTECTION CLASS 1 – FIXTURE MUST BE PROPERLY GROUNDED.
THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS UNIT. DO NOT ATTEMPT ANY
REPAIRS YOURSELF. DOING SO WILL VOID YOUR MANUFACTURER’S WARRANTY. DAMAGES
RESULTING FROM MODIFICATIONS TO THIS DEVICE AND/OR THE DISREGARD OF SAFETY
INSTRUCTIONS AND GUIDELINES IN THIS MANUAL VOID THE MANUFACTURER’S WARRANTY
AND ARE NOT SUBJECT TO ANY WARRANTY CLAIMS AND/OR REPAIRS.
DO NOT PLUG THIS UNIT INTO A DIMMER PACK DO NOT REMOVE THE COVER UNDER ANY
CONDITIONS KEEP UNIT IN AN UPRIGHT POSITION NEVER OPERATE THIS UNIT WITH THE
COVER REMOVED UNPLUG POWER DURING LONG PERIODS OF NON-USE ENSURE TANK IS EMPTY
BEFORE STORAGE OR TRANSPORT DO NOT MOVE WHEN FILLED WITH FLUID DISCONNECT
POWER BEFORE ADDING FLUID OR PERFORMING MAINTENANCE
FOR USE IN INDOOR / DRY LOCATIONS ONLY DO NOT EXPOSE DEVICE TO RAIN AND/OR
MOISTURE PLACE UNIT IN A WELL VENTILATED AREA ALLOW 40″ (100CM) ABOVE AND
AROUND THE UNIT FOR PROPER VENTILATION.
PROTECTED AGAINST INTRUSION OF SOLID THE SIZE OF A HUMAN FINGER
IP20 OR LARGER. NOT PROTECTED AGAINST LIQUID EXPOSURE OF ANY KIND!
7
SAFETY GUIDELINES
IMPORTANT SAFETY INSTRUCTIONS. READ THESE INSTRUCTIONS THOROUGHLY BEFORE USE,
AND SAVE THEM FOR FUTURE REFERENCE.
CAUTION: · Risk of burn, fire, or electric shock. · For indoor use only. ·
Please read the instruction manual carefully before use. · Do not immerse in
liquid. · Not for space heating use.
WARNING: To prevent risk of personal injury, fire, and electric shock: · Never
leave unit unattended while plugged in. Unplug device when not in use. · Read
all important safety instructions and cautions before attempting to use. ·
Connect only to a properly grounded power outlet. · Place product on a flat,
level, HARD surface and connect the cord to prevent the product from tip-
ping or overturning. · For use in covered areas only! Keep unit dry, and do
not expose to rain, moisture, or liquid immer-
sion. · Leave enough space for adequate ventilation. Keep the device cool and
away from other objects. · Do not operate the device without fog liquid in the
reservoir. · Use caution when filling the fluid reservoir in order to avoid
spillage, as spilled liquid can result in
electrical shock. · Do not use if liquid spills into or onto the unit, and
allow the device to dry completely before at-
tempting usage. · Do not overfill the fluid reservoir. · Keep away from flames
and flammable or explosive substances. · Never pour flammable liquids, such as
gas, perfume, etc, into the fog machine. · Keep the device and fog fluid out
of reach of children. · Use only under adult supervision. · Do not direct fog
output in the direction of people or open flame. · Stay at least 20 inches
(50cm) from the output nozzle on the front of the unit. · Do not obstruct the
output nozzle. · Do not open the unit for any reason. There are no user
serviceable parts inside, and all maintenance
and repair procedures should be referred to an authorized vendor or
technician. · Only a certified electrician may replace the power cord. · Clean
the unit prior to storage to avoid damage.
POWER SUPPLY CORD: · A short power supply cord (or short detachable power-
supply cord) is provided to reduce the risk
of a person becoming entangled in or tripping over the cord. · Extension cords
(or long detachable power-supply cords) are available and may be used as long
as
care is exercised during use. · If an extension cord (or long detachable
power-supply cord) is used, follow the guidelines below:
1. The indicated electrical rating of the cord should be meet or exceed the
rating of the device. 2. If the device is of the grounded type, the cord must
use a grounding type 3-wire cord. 3. The cord should be routed in such a way
as not to cause a tripping hazard or result in uninten-
tional snagging or pulling of the cord, especially in the presence of
children.
8
OVERVIEW
1. Fog Outlet 2. LED Array 3. Wired Remote Port 4. DMX In 5. DMX Out 6. Power In
7. Breaker 8. Carry Handle 9. Touch Screen Display 10. Tank Fill Cap 11. Safety Cable Attachment 12. Tank Level Indicator
9
INSTALLATION
CLAMP INSTALLATION This device features attachment points for two (2) omega
brackets (SKU: SY2504F-B20) located on the device underside, near the
underside vents. A safety cable rigging point is also included, located beside
the carry handle (see the illustration below). When mounting this unit to
truss, be sure to secure appropriately rated omega brackets (not included) to
the mounting bracket attachment points and attach a separate SAFETY CABLE of
the appropriate rating to the safety cable rigging point.
SAFETY CABLE: ALWAYS ATTACH A SAFETY CABLE WHENEVER INSTALLING THIS UNIT IN A
SUSPENDED ENVIRONMENT TO ENSURE THAT THE DEVICE WILL NOT FALL
IF THE CLAMPS FAIL. RIGGING Overhead rigging requires extensive experience,
including but not limited to: calculating working load limits, understanding
the installation material being used, and periodic safety inspection of all
installation material and the device. If you lack these qualifications, do not
attempt the installation yourself. Improper installation can result in bodily
injury.
10
OPERATION
FOG FLUID Fill tank only with approved Atmosity Flash Fog Fluid (AFF-4L) or
Atmosity Extreme Filtered Fog Fluid (AEF-4L). WARM UP Allow the device 540
seconds (9 minutes) to warm up after initial power up or refilling the fluid
tank. FOG DURATION While the fog duration setting can be set as high as 250
seconds, the individual bursts of continuous fog output will only occur for a
maximum of 8 seconds. For example, when the user sets a duration of 250
seconds, this does NOT mean that the device will be emitting fog continuously
for the entire 250-second period. Rather, the device will produce a series of
shorter fog bursts, each lasting up to 8 seconds, throughout the 250-second
period.
11
REMOTE DEVICE MANAGEMENT (RDM)
NOTE: In order for RDM to work properly, RDM enabled equipment must be used
throughout the entire system, including DMX data splitters and wireless
systems.
Remote Device Management (RDM) is a protocol that sits on top of the DMX512 data standard for lighting, allowing the DMX systems of the fixtures to be modified and monitored remotely. This protocol is ideal for instances in which a unit is installed in a location that is not easily accessible.
With RDM, the DMX512 system becomes bi-directional, allowing a compatible RDM enabled controller to send out a signal to devices on the wire, as well as allowing the fixture to respond (known as a GET command). The controller can then use its SET command to modify settings that would typically have to be changed or viewed directly via the unit’s display screen, including the DMX Address, DMX Channel Mode, and Temperature Sensors.
FIXTURE RDM INFORMATION: RDM Code
22A6H
Device Model ID 1420
Personality ID
1-channel (1) 4-channel (2) 7-channel (3) 12-channel (4)
Please be aware that not all RDM devices support all RDM features, and
therefore it is important to check beforehand to ensure that the equipment
that you are considering includes all of the features that you require.
The following parameters are accessible in RDM on this device:
[0x1000] Identify Device [0x00F0] DMX Start Address [0x00C0] Software Version
Label [0x0060] Device Info [0x0080] Device Model Description [0x0081]
Manufacturer Label [0x0082] Device Label [0x0050] Supported Parameters
[0x00E1] DMX Personality Description [0x00E0] DMX Personality [0x0200] Sensor
Definition [0x0201] Sensor Value
12
CONTROL PANEL
This unit includes a system menu with an easy to navigate touch screen control
panel where all necessary settings and adjustments are made. When first
powering on the machine, the main menu will be displayed (see Main Menu Screen
below). Press the main menu icon you would like to access. Use the ENTER
button to access sub-menus and use the UP and DOWN buttons to make
adjustments. Press the ENTER button to confirm your adjustments. You may exit
to the main menu at any time without making any adjustments by pressing the
BACK/EXIT button.
13
SYSTEM MENU
DMX SET
DMX ADDR DMX MODE
MagApp Set
1 – 512 1-CH
4-CH
7-CH
12-CH MagApp Name MagApp Passcode MagApp IP MagApp Port
Complete MagApp Reset Failed, try
again
MagApp > DMX & Magfly
On / Off
PERSONALITY LCD Set
Magfly Set
Screen OFF
Display Flip Magfly Channel
Never 10s 40s 1 min 2 min 5 min 10 min 20 min 0 deg 180 deg
0 – 14
Magfly
ON / OFF
CONTINUED ON NEXT PAGE 14
Allows MagApp data to be converted to DMX data and then sent out via DMX port
and Magfly
When Magfly is not equipped, selecting this function causes “Optional Module
Not Installed” to show on the screen.
SYSTEM MENU
MagRF Learn
PERSONALITY (cont’d from prev page)
Last State
Frequency Matching feature. Display will read “Connected” if When Magfly is not equipped, selectconnection at- ing this function causes “Optional tempt succeeds Module Not Installed” to show on the within 20 seconds. screen. Otherwise, display will read “Connection Failed.”
Yes / No
When powered up, device adheres to last settings from before power was shut off
Default
Yes / No
Restore to factory settings
MANUAL
LED Off Auto 1 – 4 Color 1 – 75 (see Color Table)
Intensity 0 – 100%
Start or pause device operation according to these values by pressure the Play/Start icon.
TIMER
Duration Interval
0 – 250 s
0 – 2500 s
LED Off Auto 1 – 4 Color 1 – 75 (see Color Table)
Intensity 0 – 100%
Start or pause device operation according to these values by pressure the Play/Start icon.
CONTINUED ON NEXT PAGE 15
SYSTEM MENU
OPT Effect (see note at
OPT1 OPT2
end of System OPT3 Menu section) OPT4
On
LED Status Follow
Off
LED Bright 0 – 100%
Off
LED Effect
Random Pulse
Strobe
PRESET
LED Style
LED Off Auto 1 – 4
Color 1 – 75
LED Off
MagRF1 Style Auto 1 – 4
Color 1 – 75
LED Off
MagRF2 Style Auto 1 – 4
Color 1 – 75
LED Off
MagRF3 Style Auto 1 – 4
Color 1 – 75
LED Off
MagRF4 Style Auto 1 – 4
Color 1 -75
State
Normal / Error
Null
INFORMATION Slot 1
MagFly MagApp
MagRF
~164°C heater core temp ~156°C heater core temp ~148°C heater core temp ~139°C
heater core temp LED always on LED illuminates when fog is outputted LED
always off LED brightness adjustment
see Color Table
see Color Table
see Color Table
see Color Table
see Color Table Operational status of unit Displays what type of module is
connected to Slot 1
CONTINUED ON NEXT PAGE
16
SYSTEM MENU
Slot 2
Last Control
INFORMATION (cont’d from prev page)
MagRemote State
MagApp Connect
MagApp IP MagFly Ch DMX Addr DMX Mode Timer Int Timer Dur Heating
Heater State
LCD Ver. Sftwr Ver.
Null
MagFly MagApp MagRF LCD_auto LCD_manual DMX MagApp MagRF MagRemote Error
Yes / No
Null Phone Route (router) No
0 – 14 1 – 512 1 / 4 / 12 0 – 2500 s 0 – 250 s 0 – 100% Normal Error No Heat
V1.2 V1.0
Displays what type of module is connected to Slot 2.
Displays current control method
Displays whether remote has been connected
Displays the type of the device that the MagApp has connected to
IP address set by user Current MagFly channel Current DMX address of unit
Current DMX mode of unit Current timer interval setting Current timer duration
setting Progress of fluid heating Operational status of fluid heater LCD
version Software version
NOTE: The function of the PRESET > OPT EFFECT menu option is to adjust the
temperature of the heater core. Higher heater core temperature settings are
more effective at burning fluids with heavier or more viscous fluids, such as
fog fluids designed for long hang times. By contrast, lower heater core
temperatures are better suited for use with lighter fog fluids.
17
DMX CHANNEL FUNCTIONS & VALUES
CHANNEL VALUES FUNCTION
1-CH 4-CH 7-CH 12-CH
Fog
000 – 009 Off
1
1
1
1
010 – 127
LED on (switches LEDs on w/ 1-second delay)
128 – 255 Max Fog with LED On
Macro
000 – 004 LED Off
005 – 154 Macros 1 – 75 (see Macro Table)
2
155 – 180 Fog burst & lighting display loop (2s loop)
181 – 205 Fog burst & lighting display loop (1s loop)
206 – 230 Auto 2
231 – 255 Auto 1
2
2 000 – 255 Red1, 0 to 100%
4
3 000 – 255 Blue1, 0 to 100%
5
4 000 – 255 Amber1, 0 to 100%
5 000 – 255 Red2, 0 to 100%
3
6 000 – 255 Green2, 0 to 100%
7 000 – 255 Blue2, 0 to 100%
8 000 – 255 Amber2, 0 to 100%
9 000 – 255 Red3, 0 to 100%
10 000 – 255 Green3, 0 to 100%
Strobe
000 – 031 Off
3
6
11 032 – 095 Random, slow to fast
096 – 159 Pulse Effect, in sequence
160 – 255 Strobe, slow to fast
Dimmer
4
7
12 000 – 003 LED Off
004 – 255 1% to 100%
18
LED LAYOUT for 12-Channel Mode
ABBREVIATION LED ZONE NAME
R1
Red 1
B1
Blue 1
A1
Amber 1
R2
Red 2
G2
Green 2
B2
Blue 2
A2
Amber 2
R3
Red 3
G3
Green 3
19
MACROS LIST
DMX VALUE 005 – 006 007 – 008 009 – 010 011 – 012 013 – 014 015 – 016 017 – 018 019 – 020 021 – 022 023 – 024 025 – 026 027 – 028 029 – 030 031 – 032 033 – 034 035 – 036 037 – 038 039 – 040 041 – 042 043 – 044 045 – 046 047 – 048 049 – 050 051 – 052 053 – 054 055 – 056 057 – 058 059 – 060 061 – 062 063 – 064
MACRO
Macro 1 Macro 2 Macro 3 Macro 4 Macro 5 Macro 6 Macro 7 Macro 8 Macro 9 Macro
10 Macro 11 Macro 12 Macro 13 Macro 14 Macro 15 Macro 16 Macro 17 Macro 18
Macro 19 Macro 20 Macro 21 Macro 22 Macro 23 Macro 24 Macro 25 Macro 26 Macro
27 Macro 28 Macro 29 Macro 30
DMX VALUE 065 – 066 067 – 068 069 – 070 071 – 072 073 – 074 075 – 076 077 – 078 079 – 080 081 – 082 083 – 084 085 – 086
MACRO
Macro 31 Macro 32 Macro 33 Macro 34 Macro 35 Macro 36 Macro 37 Macro 38 Macro
39 Macro 40 Macro 41
087 – 088 Macro 42
089 – 090 091 – 092 093 – 094 095 – 096 097 – 098 099 – 100 101 – 102 103 –
104 105 – 106 107 – 108 109 – 110
111 – 112 113 – 114 115 – 116 117 – 118 119 – 120 121 – 122 123 – 124
Macro 43 Macro 44 Macro 45 Macro 46 Macro 47 Macro 48 Macro 49 Macro 50 Macro 51 Macro 52 Macro 53 Macro 54 Macro 55 Macro 56 Macro 57 Macro 58 Macro 59 Macro 60
20
DMX VALUE 125 – 126 127 – 128 129 – 130 131 – 132 133 – 134 135 – 136 137 – 138 139 – 140 141 – 142 143 – 144 145 – 146 147 – 148 149 – 150 151 – 152 153 – 154
MACRO
Macro 61 Macro 62 Macro 63 Macro 64 Macro 65 Macro 66 Macro 67 Macro 68 Macro
69 Macro 70 Macro 71 Macro 72 Macro 73 Macro 74 Macro 75
COLOR LIST
Color 1 Color 2 Color 3 Color 4 Color 5 Color 6 Color 7 Color 8 Color 9 Color
10 Color 11 Color 12 Color 13 Color 14 Color 15 Color 16 Color 17 Color 18
Color 19 Color 20 Color 21 Color 22 Color 23 Color 24 Color 25 Color 26 Color
27 Color 28 Color 29 Color 30 Color 31
Color 32 Color 33 Color 34 Color 35 Color 36 Color 37 Color 38 Color 39 Color
40 Color 41 Color 42 Color 43 Color 44 Color 45 Color 46 Color 47 Color 48
Color 49 Color 50 Color 51 Color 52 Color 53 Color 54 Color 55 Color 56 Color
57 Color 58 Color 59 Color 60 Color 61 Color 62
21
Color 63 Color 64 Color 65 Color 66 Color 67 Color 68 Color 69 Color 70 Color 71 Color 72 Color 73 Color 74 Color 75
DIMENSIONAL DRAWINGS
Dimensions may not be drawn to scale. 22
TROUBLE SHOOTING
If you experience low output, pump noise, or no output at all, disconnect the
device and discontinue use immediately. Do not attempt to continue operation
as this may damage the machine. Check the fluid level, the breaker, and the
wall outlet to ensure it is sending power. If all the above factors do not
appear to be causing the issue, and the unit still fails to operate correctly,
it will require service. Please contact Magmatic Effects for assistance.
CLEANING & MAINTENANCE
When storing your device, be sure to store in a cool area. Cover the device so
that dust does not build up on the device. When storing for long periods of
time it is highly advisable to run the device at least once every 3-4 months.
Long periods of inactivity can severely shorten the life of your device. Only
run Magmatic’s Atmosity fluid through your machine. Never run plain water,
vinegar, or any other liquid solution through your device, as doing so will
severely damage your device.
23
SPECIFICATIONS
PERFORMANCE Rated Power: 1450W Max Output: 50,000 CFM* (cu ft/min.) Fog Burst
Distance 5-6m / 3 sec. Ready Time: Initial = 9 Minutes (approximate) Fluid
Capacity: 0.66 gallons (2.5 liters) Fluid Consumption: 6.09 oz/min (180
ml/min) Max Continuous Output Duration: 8 Seconds
COMPATIBLE FLUID Atmosity Flash Fog Fluid (AFF-4L) Atmosity Extreme Filtered
Fog Fluid (AEF-4L)
CONSTRUCTION Thermally Protected Heat Exchanger Advanced HPA (high pressure
air) Pump Technology Energy Saving Mode with Auto-Clean Process Sealed Fluid
Reservoir External Visual Fluid Level Detection Compact Light Weight Mobile
Design
CONTROL 4 DMX Channel Modes (1 / 4 / 7 / 12) Onboard LCD Touch Control Panel
DMX-512 and RDM Protocol Support Optional MagFly Wireless Module Optional
MagRF Wireless Module and Remote MagApp Card (Still in development)
CONNECTIONS Locking 5pin XLR Connector In/Out IP65 Locking Power Connector In
With Wired Digital Communication Network
SIZE / WEIGHT Length: 15.0 in (380mm) Width: 7.7 in (195mm) Height: 19.1 in
(484mm) Weight: 28.66 lbs. (13kg)
ELECTRICAL AC 120V 60Hz, 230V 50Hz NFB: 20A (120V Version) / 10A (230/240V
Version) Max Power Consumption: 1500W
THERMAL Maximum Ambient Temperature (Ta max) 104°F (40°C) Exterior Surface
Temperature, Steady State: 140°F (60°C)
ACCESSORIES MagFLY (MSR934) Wireless DMX Transceiver Module MagRF (MSR912) RF
Module and Wireless Remote Omega Rigging Bracket x2 (SY2504F-B20)
APPROVALS / RATINGS CE | cETLus | IP20 |UKCA
Specifications are subject to change without prior notice.
24
FCC STATEMENT
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. FCC RADIO FREQUENCY
INTERFERENCE WARNINGS & INSTRUCTIONS This equipment has been tested and found
to comply with the limits for a class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This device uses
and can radiate radio frequency energy, and if not installed and used in
accordance with the included instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this device does cause harmful
interference to radio or television reception, which can be determined by
turning the device off and on, the user is encouraged to try to correct the
interference by one or more of the following methods: · Reorient or relocate
that device. · Increase the separation between the device and the receiver. ·
Connect the device to an electrical outlet on a circuit different from the one
connected to the radio
receiver. · Consult the dealer or an experienced radio/TV technician for help.
Please note that the changes or modifications of this product that are not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
25
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>