MAGMATIC TST613 Therma Tour Oil Based User Manual

MAGMATIC TST613 Therma Tour Oil Based

Specifications

• Product Name: THERMA TOUR 600
• SKU: TST613
• UPC: 810008261491
• Manufacturer: MAGMATIC EFFECTS
• Address: 6122 S. Eastern Ave. Los Angeles, CA. 90040
• Contact: 323-582-3322
• Website:www.elationlighting.com
• Email: sales@magmaticeffects.com

Product Usage Instructions

General Information

• It is important to note that there are no user-serviceable parts inside the unit. Any repairs should be carried out by authorized technicians to avoid voiding the manufacturer’s warranty.
• Do not modify the fixture or disregard the safety instructions provided in the manual.

Safety Guidelines

• The fixture must be properly grounded as it belongs to Protection Class 1. Avoid pointing the fog machine towards people or their clothing as it emits hot vapor.
• Use the unit with the same caution as you would when using an electric kettle or iron.

Set-Up

• Follow the guidelines provided in the manual for setting up the THERMA TOUR 600. Ensure that the unit is placed on a stable surface and all connections are secure before powering it on.

Remote Control

• The remote control allows you to operate the fixture from a distance. Familiarize yourself with the remote control functions outlined in the manual for efficient usage.

Control Panel

• The control panel on the unit provides access to various settings and features. Refer to the manual for detailed instructions on using the control panel effectively.

System Menu

• The system menu contains advanced settings and configurations for the THERMA TOUR 600.
• Navigate through the menu using the control panel or remote control as per the instructions provided.

FAQ

Q: Can I repair the unit myself if an issue arises?

• A: No, there are no user-serviceable parts inside the unit.
• Attempting repairs yourself may void the manufacturer’s warranty.
• Contact authorized technicians for any repair needs.

Q: How should I clean and maintain the THERMA TOUR 600?

• A: Refer to the Trouble Shooting | Cleaning & Maintenance section of the manual for detailed instructions on cleaning and maintaining the unit to ensure optimal performance.

• ©2023 MAGMATIC EFFECTS all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to change without notice. MAGMATIC EFFECTS logo and identifying product names and numbers herein are trademarks of MAGMATIC EFFECTS. Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted. Product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. All non-MAGMATIC brands and product names are trademarks or registered trademarks of their respective companies.

• MAGMATIC EFFECTS and all affiliated companies hereby disclaim any liabilities for property, equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic loss associated with the use or reliance of any information contained within this document, and/or as a result of the improper, unsafe, insufficient and negligent assembly, installation, rigging, and operation of this product.

• MAGMATIC EFFECTS

• 6122 S. Eastern Ave.

• Los Angeles, CA. 90040 323-582-3322

• 323-832-9142 fax
  www.elationlighting.com

• sales@magmaticeffects.com

• Elation Professional B.V.

• Junostraat 2

• 6468 EW Kerkrade, The Netherlands +31 45 546 85 66

• +31 45 546 85 96 fax

• www.elationlighting.eu

• info@elationlighting.eu

• Elation Professional Mexico

• AC Santa Ana 30

• Parque Industrial Lerma, Lerma, Mexico 52000

• +52 728-282-7070

DOCUMENT VERSION

• Due to additional product features and/or enhancements, an updated version of this document may be available online.
• Please check www.elationlighting.com for the latest revision/update of this manual before beginning installation and/or programming.

Date| Document Version| Software Version >| DMX Channel Mode| Notes
---|---|---|---|---
09/02/20| 1.0| 1.0| 1 / 3 Channels| Initial Release
12/07/20| 1.1| N/C| No Change| Updated Voltage Specs
02/09/21| 1.2| N/C| No Change| Updated Dimensional Drawings & Specifications
06/06/22| 1.3| N/C| No Change| Updated System Menu
09/01/22| 1.4| N/C| No Change| Updated Cleaning & Maintenance
11/17/22| 1.5| N/C| No Change| Added RDM information
01/18/23| 1.6| N/C| No Change| Updated Specifications
02/09/23| 1.7| N/C| No Change| Updated Overview
02/15/23| 1.8| N/C| No Change| Added Remote Control
12/12/23| 1.9| N/C| No Change| Added FCC Statement, updated Specifications, Control Panel, System Menu

GENERAL INFORMATION

INTRODUCTION

• Please read and understand the instructions in this manual carefully and thoroughly before attempting to operate this device.
• These instructions contain important safety and use information.
• This product is intended to be used by professionally trained personnel only and is not suitable for private use.

UNPACKING

• Every device has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping.
• If the carton is damaged, carefully inspect the device for damage, and be sure all accessories necessary to install and operate the device have arrived intact.
• If damage has been found or parts are missing, please contact our customer support team for further instructions.
• Please do not return this device to your dealer without first contacting customer support. Please do not discard the shipping carton in the trash. Please recycle whenever possible.

BOX CONTENTS

Twist-locking power cable

IMPORTANT NOTICE!

• THERE ARE NO USER-SERVICEABLE PARTS INSIDE THIS UNIT. DO NOT ATTEMPT ANY REPAIRS YOURSELF. DOING SO WILL VOID YOUR MANUFACTURER’S WARRANTY.
• DAMAGES RESULTING FROM MODIFICATIONS TO THIS FIXTURE AND/OR THE DISREGARD OF SAFETY INSTRUCTIONS AND GUIDELINES IN THIS MANUAL VOID THE MANUFACTURER’S WARRANTY AND ARE NOT SUBJECT TO ANY WARRANTY CLAIMS AND/OR REPAIRS.
• NEVER POINT OR AIM A FOG MACHINE TOWARD PEOPLE OR THEIR CLOTHING.
• THIS UNIT EMITS HOT VAPOR AND SHOULD BE USED WITH THE SAME CARE THAT YOU WOULD OBSERVE WHEN USING AN ELECTRIC KETTLE OR IRON.

LIMITED WARRANTY (USA ONLY)

• A. Magmatic Effects hereby warrants, to the original purchaser, Magmatic products to be free of manufacturing defects in material and workmanship for two years (730 days) from the original date of purchase. This warranty excludes discharge lamps and all product accessories. This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable evidence, at the time service is sought.
• B. For warranty service, send the product only to the Magmatic Effects factory. All shipping charges must be pre-paid. If the requested repairs or service (including parts replacement) are within the terms of this warranty, Magmatic Effects will pay return shipping charges only to a designated point within the United States. If any product is sent, it must be shipped in its original package and packaging material. No accessories should be shipped with the product. If any accessories are shipped with the product,
• Magmatic Effects shall have no liability whatsoever for loss and/or damage to any such accessories nor the safe return thereof.
• C. This warranty is void if the product serial number and/or labels are altered or removed; if the product is modified in any manner which Magmatic Effects concludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the Magmatic Effects factory unless prior written authorization was issued to purchaser by Magmatic Effects; if the product is damaged because not properly maintained as outlined in the product instructions, guidelines and/or user manual.
• D. This is not a service contract, and this warranty does not include any maintenance, cleaning, or periodic check-ups. During the periods specified above, Magmatic Effects will replace defective parts at its expense and will absorb all expenses for warranty service and repair labor because of defects in material or workmanship. The sole responsibility of Magmatic Effects under this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of Magmatic Effects. All products covered by this warranty were manufactured after January 1, 1990, and bear identifying marks to that effect.
• E. Magmatic Effects reserves the right to make changes in design and/or performance improvements upon its products without any obligation to include these changes in any products theretofore manufactured.
• F. No warranty, whether expressed or implied, is given or made to any accessory supplied with the products described above. Except to the extent prohibited by applicable law, all implied warranties made by Magmatic Effects in connection with this product, including warranties of merchantability or fitness, are limited in duration to the warranty periods set forth above. And no warranties, whether expressed or implied, including warranties of merchantability or fitness, shall apply to this product after said periods have expired. The consumer’s and/or dealer’s sole remedy shall be such repair or replacement as is expressly provided above; and under no circumstances shall Magmatic Effects be liable for any loss and/or damage, direct and/or consequential, arising out of the use of, and/or the inability to use, this product.
• G. This warranty is the only written warranty applicable to Magmatic Effects products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published.

WARRANTY RETURNS (USA ONLY)

• To obtain warranty service, a Return Material Authorization (RMA) number must first be obtained from MAGMATIC. It is the Customer’s responsibility to provide product proof of purchase and serial number by acceptable evidence such as an invoice copy or an approved MAGMATIC Extended Warranty Certificate (“EWC”) and any relevant maintenance records at the time warranty service is sought. Failure to provide acceptable evidence of product proof of purchase or EWC and any relevant maintenance records may be cause for denial of warranty service.
• Products returned for warranty service must be sent without any accessories (i.e., power, data, and safety cables, brackets, clamps, rigging hardware, frost filters, gel frames, barn doors, lenses, hoses, nozzles, rack mounting hardware, etc.), must be boxed using the original and/or suitable packaging materials (double-box and foam) that provides ample product protection for ground and/or air freight transit and must be shipped freight pre-paid and insured to MAGMATIC in Los Angeles, CA or a MAGMATIC
• Authorized Service Center. The RMA number must be written on the outside of the return box, and a brief description of the problem and the RMA number must be documented and included in the box.
• Products returned for warranty service without an RMA number marked on the outside of the package will be refused and returned to the shipper at the Customer’s expense. Products returned for warranty service, which are received damaged due to inadequate and/or improper packaging and/or due to damage caused by the shipping carrier, may incur additional repair charges before warranty service begins and/or may void this warranty. If any product accessories (included and/or optional) are shipped with the product, MAGMATIC and/or the MAGMATIC Authorized Service Center shall have no liability whatsoever for the loss and/or damage to any such accessories, nor the safe return thereof. If the requested warranty repairs or service (including parts replacement) are within the terms of this warranty, MAGMATIC will pay return ground transportation shipping charges to a single designated point within the United States.

SAFETY GUIDELINES

This fixture is a sophisticated piece of electronic equipment. To guarantee smooth operation, it is important to follow all instructions and guidelines in this manual. Magmatic Effects is not responsible for injury and/or damages resulting from the misuse of this fixture due to the disregard of the information printed in this manual. Only qualified and/or certified personnel should install this fixture and only the original rigging parts included with this fixture should be used for installation. Any modifications to the fixture and/or the included mounting hardware will void the original manufacturer’s warranty and increase the risk of damage and/or personal injury.

• PROTECTION CLASS 1 – FIXTURE MUST BE PROPERLY GROUNDED.
• THERE ARE NO USER-SERVICEABLE PARTS INSIDE THIS UNIT. DO NOT ATTEMPT ANY REPAIRS YOURSELF. DOING SO WILL VOID YOUR MANUFACTURER’S WARRANTY. DAMAGES RESULTING FROM MODIFICATIONS TO THIS DEVICE AND/OR THE DISREGARD OF SAFETY INSTRUCTIONS AND GUIDELINES IN THIS MANUAL VOID THE MANUFACTURER’S WARRANTY AND ARE NOT SUBJECT TO ANY WARRANTY CLAIMS AND/OR REPAIRS.
• THERE ARE NO USER-SERVICEABLE PARTS INSIDE THIS UNIT. DO NOT ATTEMPT ANY REPAIRS YOURSELF. DOING SO WILL VOID YOUR MANUFACTURER’S WARRANTY. DAMAGES RESULTING FROM MODIFICATIONS TO THIS DEVICE AND/OR THE DISREGARD OF SAFETY INSTRUCTIONS AND GUIDELINES IN THIS MANUAL VOID THE MANUFACTURER’S WARRANTY AND ARE NOT SUBJECT TO ANY WARRANTY CLAIMS AND/OR REPAIRS.
• FOR USE IN INDOOR / DRY LOCATIONS ONLY DO NOT EXPOSE THE DEVICE TO RAIN AND/OR MOISTURE PLACE THE UNIT IN A WELL-VENTILATED AREA ALLOW 40” (100) ABOVE AND AROUND THE UNIT FOR PROPER VENTILATION.

CAUTION: Fog machines may set off smoke alarms!

• Do not attempt installation and/or operation of this device without proper knowledge of how to do so.
• Do not point or direct fog output in an unsafe direction.
•  Do not touch the front nozzle while the machine is in operation, or immediately after the device has been shut down, as the nozzle may get hot during operation.
• Do not shake the device, and avoid brute force when installing and/or operating.
• Be sure to save the packing carton in the unlikely event the device may have to be returned for service.
• Do not spill water or other liquids into or onto the device. Be sure that all the fog fluid is kept inside the fluid reservoir.
• Be sure that the local power outlet matches the required voltage for the device.
• Do not remove components or disassemble the device. There are no user-serviceable parts inside.
• Never connect this device to a dimmer pack.
• Do not attempt to operate this device if it has been damaged in any way.
• Never use this device with the cover removed.
• To reduce the risk of electrical shock or fire, do not expose this device to rain or moisture.
• Do not attempt to operate this device if the power cord has been frayed, crimped, and/or damaged. Replace any damaged power cords with new cords of the same power rating.
• Do not remove or break off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical shock and fire in case of an internal shortage.
• Always disconnect from the main power before making any connection, performing cleaning or maintenance, or adding or draining water.
• Always drain the fluid before moving the device.
• Always be sure to mount this device in an area that will allow proper ventilation.
• Always disconnect power cords during long periods of non-use.
• This unit is intended for indoor use only. Use of this product outdoors voids all warranties.
• Always mount this unit safely and stably.
• Please route your power cord out of the way of foot traffic. Power cords should be routed so they are not likely to be walked on, or pinched by items placed upon or against them.
• The device should be serviced by qualified service personnel when:
• The power cords or plugs have become damaged.
• Objects have fallen on and/or liquid has spilled into the device.
• The device has been exposed to rain and/or moisture.
• The device does not operate normally or exhibits a marked change in performance.

OVERVIEW

1. Directional Blower
2. Tank
3. Haze Outlet w/ Cap
4. Tank Level Gauge
5. Haze Outlet/Filler Lid
6. Control Panel Lid
7. Breaker
8. Power Input
9. DMX Input
10. DMX Output
11. Cooling Vent
12. Power Switch
13. Wired Remote Port
14. Touch Display Screen
15. Fluid Drain Valve (on the underside)

SETUP

1. Open the shipping carton and carefully remove the device from the shipping carton.
2. Be sure to remove ALL the packing material, paying particular attention to the area around the fog outlet vent.
3. Set the device on a flat dry surface. Open the filler/outlet lid and unscrew the tank filler cap.
4. Fill the reservoir with MAGMATIC ATMOSITY fluid (SKU# ARH and AAH) only, and replace the reservoir cap. Never run the device on anything other than an approved, MAGMATIC branded fluid, as doing so can result in severe damage to your device.
5. Plug the device into a matching power supply and flip the power switch to the ON position.
6. After power is switched on, the device is immediately ready to emit haze. The device may be controlled manually or via a DMX signal.

REMOTE CONTROL

• This unit can be operated using the MagRemote VIDI remote control, which is a 4-pin, wired remote that can be used to control the volume, intensity, duration, and interval.
• Please note that the MagRe-mote VIDI is a universal remote, and some remote functions may not apply to all units.
• To operate the device using this remote, simply connect the remote’s 4-pin male connector to the matching 4-pin female port on the back of the unit, which is labeled “Remote In.”
• The unit will automatically recognize whether or not the remote has been connected. Available functions are listed below:
• Manual Button – Unit outputs when the button is pressed, and stops when the button is released. LED illuminated when the unit is outputting.
• Continuous Button – The unit outputs when a button is pressed the first time and continues to output until the button is pressed again. LED illuminates when the unit is outputting.
• Timer On/Off Button – Activates or deactivates the timer function. The timer function is adjustable using the interval and duration knobs. LED illuminates when a function is activated.
• Volume Knob – N/A.
• Intensity Knob – N/A.
• Interval Knob – Adjust the length of the time that the unit will take before it begins to output haze.
• Duration Knob – Adjust the length of time that the unit will produce haze once the unit reaches the current interval time.

CONTROL PANEL

• This fixture includes a system menu with an easy-to-navigate touchscreen control panel where all necessary settings and adjustments are made.
• When first powering on the fixture, the fixture’s main menu will be displayed (see Main Menu Screen below).
• Press the main menu icon you would like to access. Use the ENTER button to access the sub-menus and use the UP and DOWN buttons to make adjustments.
• Press the ENTER button to confirm your adjustments. You may exit the main menu at any time without making any adjustments by pressing the BACK/EXIT button.
• After 10 seconds of non-operation, the system will return to the “Ready to Fog” status screen.

SYSTEM MENU

NOTE: When the relevant module for a selected mode is not installed, selecting the mode will prompt a message that reads “Optional Module Not Installed”

PRESET MODE

Preset Mode| Duration| Interval| Fog Output| Wind Intensity
---|---|---|---|---
1| 40 min| 20 min| 100%| 100%
2| 30 min| 15 min| 100%| 100%
3| 20 min| 10 min| 100%| 100%
4| 10 min| 5 min| 100%| 100%
5| 5 min| 5 min| 100%| 100%

DMX CHANNEL FUNCTIONS & VALUES

REMOTE DEVICE MANAGEMENT (RDM)

• NOTE: For RDM to work properly, RDM-enabled equipment must be used throughout the entire system, including DMX data splitters and wireless systems.
• Remote Device Management (RDM) is a protocol that sits on top of the DMX512 data standard for lighting, allowing the DMX systems of the device to be managed, modified, and monitored remotely (hence, remote device management).
• This protocol is ideal for fixtures installed in locations that are not easily accessible.
• With RDM, the DMX512 system becomes bi-directional, allowing a compatible RDM-enabled controller to send out a signal to devices on the wire, as well as allowing the fixture to respond (known as a GET command).
• The controller can then use its SET command to modify settings that would typically have to be changed or viewed directly via the unit’s display screen, including the DMX Address, DMX Channel Mode, and Temperature Sensors.

FIXTURE RDM INFORMATION:

• Please be aware that not all RDM devices support all RDM features, and therefore it is important to check beforehand to ensure that the equipment that you are considering includes all of the features that you require.

The following parameters are accessible in RDM on this device:

[0x1000] IDENTIFY_DEVICE

[0x00F0] DMX_START_ADDRESS
[0x00C0] SOFTWARE_VERSION_LABEL
[0x0060] DEVICE_INFO
[0x0080] DEVICE_MODEL_DESCRIPTION
[0x0081] MANUFACTURER_LABEL
[0x0082] DEVICE_LABEL
[0x0050] SUPPORTED_PARAMETERS
[0x00E1] DMX_PERSONALITY_DESCRIPTION
[0x00E0] DMX_PERSONALITY
[0x0200] SENSOR_DEFINITION
[0x0201] SENSOR_VALUE

DIMENSIONAL DRAWINGS

Dimensions may not be drawn to scale.

TROUBLESHOOTING

• If you experience low output, pump noise, or no output at all, disconnect the device and discontinue use immediately.
• Do not attempt to continue operation as this may damage the machine. Check the fluid level, the breaker, and the wall outlet to make sure that it is sending power.
• If all the above factors do not appear to be causing the issue, and the unit still fails to operate correctly, the unit will require service. Please contact Magmatic Effects for assistance.

CLEANING & MAINTENANCE

• This device is capable of operating with either water-based or oil-based fluid. However, because the internal tank cannot be cleaned or disassembled, the following procedures must be followed when switching from one type of fluid to another:
• WHEN GOING FROM OIL-BASED FLUID TO WATER-BASED FLUID- Open the drain valve and allow the oil-based fluid to drain out completely, then fill the fluid reservoir with water.
• Run the device until the tank is empty, then refill the reservoir with water-based liquid. There may be traces of oil-based fluid left in the tank, but this will not affect the device.
• WHEN GOING FROM WATER-BASED FLUID TO OIL-BASED FLUID – Drain the water-based fluid from the tank, then leave the tank lid open and allow the tank to dry for approximately 24 hours.
• Close the drain valve, and fill the reservoir with oil-based fluid, and run your device as desired.
• When storing your device, be sure to store it in a cool area. Cover the device to prevent dust from accumulating on the device. When storing for long periods it is highly advisable to run the device at least once every 3-4 months. Long periods of inactivity can severely shorten the life of your device. Only run Magmatic’s Atmosity fluid (SKU# ARH and AAH) through your machine. Never run plain water, vinegar, or any other liquid solution through your device, as doing so will severely damage your device.

SPECIFICATIONS

• PERFORMANCE
  • Rated Power: 370W
  • Max Output: 1,200 CFM* (cu ft/min.) (approximate) Ready Time: Instant
  • Fluid Capacity: 0.66043 Gallons (2.5 liters)
  • Fluid Consumption: 0.033814 oz/min (1.0 ml/min)
• COMPATIBLE FLUID
  • Atmosity ARH (Oil Based Fluid)
  • Atmosity AAH (Water Based Fluid)
• CONSTRUCTION
  • Advanced HPA (high-pressure air) Pump Technology Energy Saving Mode with Auto-Clean Process
  • Sealed Fluid Reservoir
  • External Visual Fluid Level Detection
  • Compact Light Weight Mobile Design
• CONTROL
  • DMX Control Modes: 2 (1 / 3 channel)
  • Onboard LCD Touch Control Panel
  • DMX-512 and RDM Protocol Support
  • Optional MAGFLY Wireless DMX Transceiver
  • Optional MAGRF Wireless and Wired Remotes
• CONNECTIONS
  • Locking 5pin XLR Connector In/Out
  • IP65 Locking Power Connector In
  • With Wired Digital Communication Network
• SIZE / WEIGHT
  • Length: 20.2 in. (514.1mm)
  • Width: 14.7 in. (374.1mm)
  • Height: 14.1 in. (365.1mm)
  • Weight: 66 lbs. (30kg)
• ELECTRICAL
  • AC120V 60Hz (US Version)
  • AC230V 50Hz (EU Version)
  • 10A Breaker (NFB US Version)
  • 5A Breaker (NFB EU Version)
  • Max Power   Consumption: 370W
• THERMAL
  • Maximum Ambient Temperature (Ta max) 104°F (40°C) Exterior Surface Temperature, Steady State: 122°F (50°C)
• APPROVALS / RATINGS
  • CE | cETLus | IP20 | UKCA | FCC

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC RADIO FREQUENCY INTERFERENCE WARNINGS & INSTRUCTIONS

This product has been tested and found to comply with the limits as per Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device uses and can radiate radio frequency energy and, if not installed and used under the included instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following methods:

• Reorient or relocate the device.
• Increase the separation between the device and the receiver.
• Connect the device to an electrical outlet on a circuit different from which the radio receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Europe Energy Saving Notice

• Energy Saving Matters (EuP 2009/125/EC)
• Saving electric energy is a key to protecting the environment. Please turn off all electrical products when they are not in use.
• To avoid power consumption in idle mode, disconnect all electrical equipment from power when not in use. Thank you.

CUSTOMER SUPPORT

• Contact MAGMATIC customer service for any product-related service and support needs.
• Also visit forums.elationlighting.com with questions, comments, or suggestions.
• ELATION SERVICE USA – Monday – Friday 8:00 am to 4:30 pm PST
• 323-582-3322
• Fax323-832-9142
• sales@magmaticeffects.com
• ELATION SERVICE EUROPE – Monday – Friday 08:30 to 17:00 CET
• Voice: +31 45 546 85 63
• Fax: +31 45 546 85 96
• support@elationlighting.eu
• REPLACEMENT PARTS: Please visit parts.elationlighting.com

References

• Topics | Elation Lighting Forums

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>