PRO Series All in One PC Computers

“`html

Product Information

Specifications

• Model: PRO Series All-in-One PC

• Models Available: PRO AP242 14M (MS-AE06), PRO AP242P 14M
  (MS-AE06), PRO AP272 14M (MS-AF83), PRO AP272P 14M (MS-AF83)

• Operating System: Windows 11

• Revision: V1.2, 2023/12

Product Usage Instructions

Getting Started

This chapter provides information on hardware setup procedures.
When connecting devices, use a grounded wrist strap to avoid static
electricity.

Package Contents

• All-in-One PC
• Documentation
• Accessories:
  • User Guide (Optional)
  • Quick Start Guide (Optional)
  • Warranty Card (Optional)
  • Warranty Book (Optional)
  • Power Cord
  • External Power Supply
  • Mouse (Optional)
  • Keyboard (Optional)

Important:

• Contact your place of purchase or local distributor if any
  items are damaged or missing.

• Package contents may vary by country.

• The included power cord is exclusively for this personal
  computer and should not be used with other products.

Safety & Comfort Tips

Choose a good workspace with adequate illumination. Adjust desk
and chair height for proper posture. Sit straight, support your
back, and keep knees and elbows at a 90-degree angle. Place feet
flat on the floor and hands naturally on the desk to support
wrists. Avoid using the PC in uncomfortable positions.

System Overview

Front View

1. Digital Microphone: Used for video chatting online.

2. IR Webcam Module/ Webcam Privacy Shutter: Supports
   infrared-based facial recognition.

3. Power LED: Indicates system status.

4. Cable Routing Hole: For organized cable management.

Rear View

1. Ventilator: Used for air convection to prevent overheating. Do
   not cover.

2. Power Button: Turns the system on and off.

3. Brightness Button: Adjusts brightness level.

4. Stereo Speakers: Built-in stereo speakers for high-quality
   sound.

FAQ

Q: What should I do if my package contents are damaged?

A: Contact your place of purchase or local distributor for
assistance.

Q: How do I adjust the brightness level of the display?

A: You can adjust the brightness level using the brightness
buttons located on the rear of the PC.

“`

PRO Series
All-in-One PC
PRO AP242 14M (MS-AE06) PRO AP242P 14M (MS-AE06) PRO AP272 14M (MS-AF83) PRO AP272P 14M (MS-AF83)
User Guide

Contents
Getting Started……………………………………………………………………………………………….. 3 Package Contents……………………………………………………………………………………… 3 Safety & Comfort Tips ……………………………………………………………………………….. 3 System Overview……………………………………………………………………………………….. 4 Installing the Monitor Stand……………………………………………………………………….. 9 Connecting the Power ……………………………………………………………………………… 10 Adjusting the Monitor ………………………………………………………………………………. 11 Component Replacement & Upgrade ………………………………………………………… 12
Windows 11 System Operations…………………………………………………………………….. 13 Power Management ………………………………………………………………………………… 13 Network Connections ………………………………………………………………………………. 17 System Recovery …………………………………………………………………………………….. 25
F3 Hotkey Recovery (Optional) ………………………………………………………………………. 27 Troubleshooting……………………………………………………………………………………………. 28 Safety Instructions………………………………………………………………………………………… 30 TÜV Rheinland Certification…………………………………………………………………………… 32 Regulatory Notices……………………………………………………………………………………….. 33
Revision V1.2, 2023/12
2

Getting Started
This chapter provides you with the information on hardware setup procedures. While connecting devices, be careful in holding the devices and use a grounded wrist strap to avoid static electricity.

Package Contents

All-in-One PC Documentation Accessories

PRO AP242 14M PRO AP242P 14M PRO AP272 14M PRO AP272P 14M User Guide (Optional) Quick Start Guide (Optional) Warranty Card (Optional) Warranty Book (Optional) Power Cord External Power Supply Mouse (Optional) Keyboard (Optional)

Important
Contact your place of purchase or local distributor if any of the items is damaged or missing.
Package contents may vary by country.
The included power cord is exclusively for this personal computer and should not be used with other products.

Safety & Comfort Tips
Choosing a good workspace is important if you have to work with your PC for a long period of time.
Your work area should have enough illumination.
Choose the proper desk and chair and adjust their height to fit your posture when operating.
When sitting on the chair, sit straight and keep a good posture. Adjust the chair’s back (if available) to support your back comfortably.
Place you feet flat and naturally on the floor, so that your knees and elbows have the proper position (about 90-degree) when operating.
Put your hands on the desk naturally to support your wrists.
Avoid using your PC in a place where discomfort may occur (such as on the bed).
The PC is an electrical device. Please treat it with great care to avoid personal injury.

3

System Overview
Front View

1

1

2

3
4
1 Digital Microphone
The built-in microphone can be used for video chatting online.
2 IR Webcam Module/ Webcam Privacy Shutter
The IR Webcam Module supports infrared-based facial recognition for instant access to your computer.
3 Power LED
The power LED glows when the system is turned on and goes off when the system is shut down. In terms of power saving, the LED blinks in S3 (Suspend to RAM) mode and goes off in S4 (Suspend to Disk) mode.
4 Cable Routing Hole
Route the cables through the cable routing hole to avoid cable spaghetti when connecting devices.
4

Rear View

1

23

4

1

4

5

11 12

6

7

8

9

10 12 13 14

1 Ventilator
The ventilator on the enclosure is used for air convection and to prevent the equipment from overheating. Do not cover the ventilator.
2 Power Button
Press the power button to turn the system on and off.
3 Brightness Button
These buttons adjust the brightness level.

5

4 Stereo Speakers
The built-in stereo speakers deliver high quality sound with stereo system.
5 Kensington Lock Port
This PC provides a Kensington lock port, which allows users to secure the PC in place with a key or some mechanical PIN device and attached through a rubberised metal cable. The end of the cable has a small loop which allows the whole cable to be looped around a permanent object, such as a heavy table or other similar equipment, thus securing the PC in place.
6 Power Jack
Power supplied through this jack supplies power to your system.

Important
We suggest that you connect the AC/DC adapter to your PC first and then connect the AC power cord to the socket-outlet for safety concerns.

7 HDMITM Connector
Supports 4K@60Hz as specified in HDMITM 2.1.

Important
Available for the processor with integrated graphics.
Graphics specifications may vary depending on the installed CPU.
8 DisplayPort
Supports 4K@60Hz as specified in DisplayPort 1.4.

Important
Available for the processor with integrated graphics.
Graphics specifications may vary depending on the installed CPU.
9 LAN Jack
The standard RJ-45 LAN jack is provided for connection to the Local Area Network (LAN). You can connect a network cable to it.

SPEED LED

LED Link/ Activity LINK/ACT LED
LED
Speed LED

Status Off Yellow Blinking Off Green Orange

Description No link Linked Data activity 10 Mbps 100 Mbps 1 Gbps

10 USB 3.2 Gen 2 Type-C Port
This connector is provided for USB peripheral devices. This connector can provide up to 5V/3A of power. (Speed up to 10 Gbps)

6

11 USB 3.2 Gen 2 Port
This connector is provided for USB peripheral devices. (Speed up to 10 Gbps)
12 USB 2.0 Port
This connector is provided for USB peripheral devices. (Speed up to 480 Mbps)
Important
High-speed devices are recommended for USB 3.2 ports whereas lowspeed devices, such as mouse or keyboard, are suggested to be plugged into the USB 2.0 ports.
13 Microphone Jack
This connector is provided for microphones.
14 Headphone Jack
This connector is provided for headphones or speakers.
7

Side View 1
1 USB 3.2 Gen 1 Port
This connector is provided for USB peripheral devices. (Speed up to 5 Gbps)
8

Installing the Monitor Stand
1. Leave the monitor in its protective packaging. Align the stand to the monitor groove.
2. Push the stand towards the monitor groove until it locks in place. 3. Connect the base to the stand and tighten the base screws to secure the base. 4. Make sure the stand assembly is properly installed before setting the monitor
upright.
1

2

3

Important
Do not use any sharp objects on the panel.

9

Connecting the Power
Connect the external power supply to the AIO PC and plug in the power cord. External Power Supply 120W
· Input: 100-240V~, 50-60Hz · Output: 19.5V 6.15A

3

4

2

1
Important
The illustrations are for reference only. Your AIO PC may vary in appearance. Please make sure the AIO PC has been grounded to earth through the AC power
cord and the electrical outlet before powering on the AIO PC.

10

Adjusting the Monitor
This AIO PC is designed to maximize your viewing comfort with its adjustment capabilities.
PRO AP242/ AP242P 14M

-5°

20°

110 mm

PRO AP272/ AP272P 14M

-4°

20°

130 mm

Important
Do not use any sharp objects on the display panel. Avoid pressing the display panel when adjusting.
11

Component Replacement & Upgrade
Please note that certain components preinstalled in the product may be upgradable or replaceable by user’s request depending on the models users purchased.
For any further information on the product users purchased, please contact the local dealer. Do not attempt to upgrade or replace any component of the product if you are not an authorized dealer or service center, since it may cause the warranty void. It is strongly recommended that you contact the authorized dealer or service center for any upgrade or replace service.
12

Windows 11 System Operations
Important
All information and Windows screenshots are subject to change without prior notice.
Power Management
Power management of personal computers (PCs) and monitors has the potential to save significant amounts of electricity as well as deliver environmental benefits. To be energy efficient, turn off your display or set your PC to sleep mode after a period of user inactivity. 1. Right-click [Start] and select [Power Options] from the list. 2. Adjust [Screen and sleep] settings and select a power mode from the list. 3. To choose or customize a power plan, type control panel in the search box and
select [Control Panel]. 4. Open up [All Control Panel Items] window. Select [Large icons] under [View by] drop-down menu. 5. Select [Power Options] to continue. 6. Select a power plan and fine-tune the settings by clicking [Change plan settings]. 7. To create your own power plan, select (Create a power plan). 8. Select an existing plan and give it a new name. 9. Adjust settings for your new power plan. 10.The [Shut down or sign out] menu also presents power saving options for rapid and
easy management of your system power.
Energy Savings
The power management feature allows the computer to initiate a low-power or “Sleep” mode after a period of user inactivity. To take advantage of these potential energy savings, the power management feature has been preset to behave in the following ways when the system is operating on AC power: Turn off the display after 10 minutes Initiate Sleep after 30 minutes
Waking the System Up
The computer shall be able to wake up from power saving mode in response to a command from any of the following: the power button, the network (Wake On LAN), the mouse, the keyboard.
Energy Saving Tips: Turn off the monitor by pressing the monitor power button after a period of user
inactivity.
13

Tune the settings in Power Options under Windows OS to optimize your PC’s power management.
Install power saving software to manage your PC’s energy consumption. Always disconnect the AC power cord or switch the wall socket off if your PC would
be left unused for a certain time to achieve zero energy consumption.
1 2
3
14

4 5
6
7 15

8 9
10 16

Network Connections
Wi-Fi
1. Right-click [Start] and select [Network Connections] from the list. 2. Select and turn on [Wi-Fi]. 3. Select [Show available networks]. A list of available wireless networks pops up.
Choose a connection from the list. 4. To establish a new connection, select [Manage known networks]. 5. Select [Add network]. 6. Enter information for the wireless network you intend to add and click [Save] to
establish a new connection.
1 2
17

3 4
18

5 6
19

Ethernet
1. Right-click [Start] and select [Network Connections] from the list. 2. Select [Ethernet]. 3. The [IP assignment] and [DNS server assignment] are automatically set as
[Automatic (DHCP)]. 4. For a Static IP connection, click [Edit] of [IP assignment]. 5. Select [Manual]. 6. Switch on the [IPv4] or [IPv6]. 7. Type the information from your Internet Service Provider and click [Save] to
establish a Static IP connection.
1 2
20

3

4

5 21

6 7
22

Dial-up
1. Right-click [Start] and select [Network Connections] from the list. 2. Select [Dial-up]. 3. Select [Set up a new connection]. 4. Choose [Connect to the Internet] and click [Next]. 5. Select [Broadband (PPPoE)] to connect using DSL or cable that requires a user
name and password. 6. Type the information from your Internet Service Provider (ISP) and click [Connect] to establish your LAN connection.
1
2
23

3

4

5

6

24

System Recovery
The purposes for using the System Recovery Function may include: Restore the system back to the initial status of original manufacturer’s default
settings. When some errors have occurred to the operating system in use. When the operating system is affected by virus and is not able to work normally. When you want to install the OS with other built-in languages. Before using the System Recovery Function, please back up the important data saved on your system drive to other storage devices. If the following solution fails to recover your system, please contact the authorized local distributor or service center for further assistance.
Reset this PC
1. Right-click [Start] and select [Settings] from the list. 2. Select [Recovery] under [System]. 3. Click [Reset PC] to start the system recovery. 4. The [Choose an option] screen pops up. Choose between [Keep my files] and
[Remove everything] and follow the on-screen instructions to complete your system recovery.
1
2 2
25

3 4
26

F3 Hotkey Recovery (Optional)
Precautions for Using the System Recovery Function
1. If your hard drive and system encountered non-recoverable problems, please use the F3 Hotkey recovery from the Hard Drive first to perform the System Recover Function.
2. Before using the System Recovery Function, please back up the important data saved on your system drive to other storage devices.
Recovering the system with the F3 Hotkey
Follow the instructions below to continue: 1. Restart the PC. 2. Press the F3 hotkey on the keyboard promptly when the MSI greeting appears on
the display. 3. On the [Choose an option] screen, select [Troubleshoot]. 4. On the [Troubleshoot] screen, select [Restore MSI factory settings] to reset the
system to the default settings. 5. On the [RECOVERY SYSTEM] screen, select [System Partition Recovery]. 6. Follow the on-screen instructions to continue and complete the Recovery Function.
27

Troubleshooting
My system does not start.
· Check if the system is connected to an electrical outlet and it is turned on. · Check if the power cord and all cables are connected firmly.
When I turn on my computer, the message “Operating System not found” appears or Windows does not start.
· Check if there is a non-bootable CD/ DVD inside the optical disk drive. If so, remove the CD/ DVD then restart the computer.
· Check Boot Device Priority settings in the BIOS Setup.
The system can not be shut down.
It is best to shut down your computer using the Shut Down icon in the operating system. Using other methods, including those listed below, may result in data failure. If the Shut Down procedure does not work, choose one of the following steps:
· Press Ctrl+Alt+Del keys, then choose Shut Down. · Press and hold the power button till the system is off. · Unplug the power cable from the system.
My microphone does not work.
· For built-in microphone, please go to Start > Control Panel > Sounds and Audio Devices > Audio to check if it is muted.
· If you are using an external microphone, check that the microphone is plugged into the Microphone jack.
The Internet connection has problems.
· If you are having a problem connecting to your Internet Service Provider (ISP), check if the ISP is experiencing technical problems.
· Check the Network settings and connection and make sure the system is properly configured to Internet access.
· The wireless LAN data transfer speed is affected by distance and obstructions between devices and access points. To maximize the data transfer speed, choose the access point closest to your system.
System speakers do not work.
· Check the master volume setting in the Audio Mixer. · If you are using an application that has its own volume control, check if the volume
is muted. · If you have connected an audio cable to the Headphone jack, disconnect it. · If the system has OSD function, please adjust the volume of OSD.
28

System monitor does not display anything.
· Check if the system is connected to an electrical outlet and it is turned on. · The system may be in Standby mode. Press any key to activate the Display.
29

Safety Instructions
Read the safety instructions carefully and thoroughly.
All cautions and warnings on the device or User Guide should be noted.
Refer servicing to qualified personnel only.
Power
Make sure that the power voltage is within its safety range and has been adjusted properly to the value of 100~240V before connecting the device to the power outlet.
If the power cord comes with a 3-pin plug, do not disable the protective earth pin from the plug. The device must be connected to an earthed mains socket- outlet.
Please confirm the power distribution system in the installation site shall provide the circuit breaker rated 120/240V, 20A (maximum).
Always unplug the power cord before installing any add-on card or module to the device.
Always disconnect the power cord or switch the wall socket off if the device would be left unused for a certain time to achieve zero energy consumption.
Place the power cord in a way that people are unlikely to step on it. Do not place anything on the power cord.
If this device comes with an adapter, use only the MSI provided AC adapter approved for use with this device.
Battery
Please take special precautions if this device comes with a battery.
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.
Avoid disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, which can result in an explosion.
Avoid leaving a battery in an extremely high temperature or extremely low air pressure environment that can result in an explosion or the leakage of flammable liquid or gas.
Do not ingest battery. If the coin/button cell battery is swallowed, it can cause severe internal burns and can lead to death. Keep new and used batteries away from children.
European Union:

BSMI:

Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations.
For better environmental protection, waste batteries should be collected separately for recycling or special disposal.

30

California, USA: The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California. For further information please visit: https://dtsc.ca.gov/perchlorate/
Environment
To reduce the possibility of heat-related injuries or of overheating the device, do not place the device on a soft, unsteady surface or obstruct its air ventilators.
Use this device only on a hard, flat and steady surface. To prevent the device from tipping over, secure the device to a desk, wall or fixed
object with an anti-tip fastener that helps to properly support the device and keep it safe in place. To prevent fire or shock hazard, keep this device away from humidity and high temperature. Do not leave the device in an unconditioned environment with a storage temperature above 60 or below 0, which may damage the device. The maximum operating temperature is around 35. When cleaning the device, be sure to remove the power plug. Use a piece of soft cloth rather than industrial chemical to clean the device. Never pour any liquid into the opening; that could damage the device or cause electric shock. Always keep strong magnetic or electrical objects away from the device. If any of the following situations arises, get the device checked by service personnel: · The power cord or plug is damaged. · Liquid has penetrated into the device. · The device has been exposed to moisture. · The device does not work well or you can not get it working according to the User
Guide. · The device has dropped and damaged. · The device has obvious sign of breakage.
31

TÜV Rheinland Certification
TÜV Rheinland Low Blue Light Certification
Blue light has been shown to cause eye fatigue and discomfort. MSI now offers monitors with TÜV Rheinland Low Blue Light certification to ensure users’ eye comfort and well-being. Please follow the instructions below to reduce the symptoms from extended exposure to the screen and blue light. Place the screen 20 ­ 28 inches (50 ­ 70 cm) away
from your eyes and a little below eye level. Consciously blinking the eyes every now and then will help to reduce eye strain after
extended screen time. Take breaks for 20 minutes every 2 hours. Look away from the screen and gaze at a distant object for at least 20 seconds
during breaks. Make stretches to relieve body fatigue or pain during breaks. Turn on the optional Low Blue Light function.
TÜV Rheinland Flicker Free Certification
TÜV Rheinland has tested this product to ascertain whether the display produces visible and invisible flicker for the human eye and therefore strains the eyes of users.
TÜV Rheinland has defined a catalogue of tests, which sets out minimum standards at various frequency ranges. The test catalogue is based on internationally applicable standards or standards common within the industry and exceeds these requirements.
The product has been tested in the laboratory according to these criteria. The keyword “Flicker Free” confirms that the device has no visible and invisible
flicker defined in this standard within the range of 0 – 3000 Hz under various brightness settings. The display will not support Flicker Free when Anti Motion Blur/MPRT is enabled. (The availability of Anti Motion Blur/MPRT varies by products.)
32

Regulatory Notices
CE Conformity
Products bearing the CE marking comply with one or more of the following EU Directives as may be applicable: RED 2014/53/EU Low Voltage Directive 2014/35/EU EMC Directive 2014/30/EU RoHS Directive 2011/65/EU ErP Directive 2009/125/EC Compliance with these directives is assessed using applicable European Harmonized Standards. The point of contact for regulatory matters is MSI-Europe: Eindhoven 5706 5692 ER Son.
Products with Radio Functionality (EMF)
This product incorporates a radio transmitting and receiving device. For computers in normal use, a separation distance of 20 cm ensures that radio frequency exposure levels comply with EU requirements. Products designed to be operated at closer proximities, such as tablet computers, comply with applicable EU requirements in typical operating positions. Products can be operated without maintaining a separation distance unless otherwise indicated in instructions specific to the product.
Restrictions for Products with Radio Functionality (select products only)
CAUTION: IEEE 802.11x wireless LAN with 5.15~5.35 GHz frequency band is restricted for indoor use only in all European Union member states, EFTA (Iceland, Norway, Liechtenstein), and most other European countries (e.g., Switzerland, Turkey, Republic of Serbia). Using this WLAN application outdoors might lead to interference issues with existing radio services.
Radio frequency bands and maximum power levels Features: Wi-Fi 7, BT Frequency Range:
2.4 GHz: 2400~2485MHz 5 GHz: 5150~5350MHz, 5470~5725MHz, 5725~5850MHz 6 GHz: 5955~6415MHz Max Power Level: 2.4 GHz: 20dBm 5 GHz: 23dBm 6 GHz: 23dBm
33

FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the measures listed below: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected. Consult the dealer or an experienced radio/television technician for help. Notice 1 The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Notice 2 Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: this device may not cause harmful interference, and this device must accept any interference received, including interference that may
cause undesired operation. MSI Computer Corp. 901 Canada Court, City of Industry, CA 91748, USA 626-913-0828 www.msi.com
WEEE Statement
Under the European Union (“EU”) Directive on Waste Electrical and Electronic Equipment, Directive 2012/19/EU, products of “electrical and electronic equipment” cannot be discarded as municipal waste anymore and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life.
34

Chemical Substances Information
In compliance with chemical substances regulations, such as the EU REACH Regulation (Regulation EC No. 1907/2006 of the European Parliament and the Council), MSI provides the information of chemical substances in products at: https://csr.msi.com/global/index
RoHS Statement
Japan JIS C 0950 Material Declaration
A Japanese regulatory requirement, defined by specification JIS C 0950, mandates that manufacturers provide material declarations for certain categories of electronic products offered for sale after July 1, 2006. https://csr.msi.com/global/Japan-JIS-C-0950-Material-Declarations
India RoHS
This product complies with the “India E-waste (Management and Handling) Rule 2016” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
Turkey EEE Regulation
Conforms to the EEE Regulations of the Republic Of Turkey
Ukraine Restriction of Hazardous Substances
The equipment complies with requirements of the Technical Regulation, approved by the Resolution of Cabinet of Ministry of Ukraine as of 10 March 2017, 139, in terms of restrictions for the use of certain dangerous substances in electrical and electronic equipment.
Vietnam RoHS
As from December 1, 2012, all products manufactured by MSI comply with Circular 30/2011/TT-BCT temporarily regulating the permitted limits for a number of hazardous substances in electronic and electric products.
35

Green Product Features
Reduced energy consumption during use and stand-by Limited use of substances harmful to the environment and health Easily dismantled and recycled Reduced use of natural resources by encouraging recycling Extended product lifetime through easy upgrades Reduced solid waste production through take-back policy
Environmental Policy
The product has been designed to enable proper reuse of parts and recycling and should not be thrown away at its end of life.
Users should contact the local authorized point of collection for recycling and disposing of their end-of-life products.
Visit the MSI website and locate a nearby distributor for further recycling information.
Users may also reach us at gpcontdev@msi.com for information regarding proper disposal, take-back, recycling, and disassembly of MSI products.
Warning!
Overuse of screens is likely to affect eyesight.
Recommendations:
1. Take a 10-minute break for every 30 minutes of screen time. 2. Children under 2 years of age should have no screen time. For children aged 2
years and over, screen time should be limited to less than one hour per day.
Upgrade and Warranty
Please note that certain components preinstalled in the product may be upgradable or replaceable by user’s request. For any further information about the product users purchased, please contact the local dealer. Do not attempt to upgrade or replace any component of the product if you are not an authorized dealer or service center, since it may cause the warranty void. It is strongly recommended that you contact the authorized dealer or service center for any upgrade or replace service.
Acquisition of Replaceable Parts
Please be noticed that the acquisition of replaceable parts (or compatible ones) of the product users purchased in certain countries or territories may be fulfilled by the manufacturer within 5 years at most since the product has been discontinued, depending on the official regulations declared at the time. Please contact the manufacturer via https://www.msi.com/support/ for the detailed information about the acquisition of spare parts.
Copyright and Trademarks Notice
36

Copyright © Micro-Star Int’l Co., Ltd. All rights reserved. The MSI logo used is a registered trademark of Micro-Star Int’l Co., Ltd. All other marks and names mentioned may be trademarks of their respective owners. No warranty as to accuracy or completeness is expressed or implied. MSI reserves the right to make changes to this document without prior notice. The terms HDMITM, HDMITM High-Definition Multimedia Interface, HDMITM Trade dress and the HDMITM Logos are trademarks or registered trademarks of HDMITM Licensing Administrator, Inc.
Technical Support
If a problem arises with your system and no solution can be obtained from the user’s manual, please contact your place of purchase or local distributor. Alternatively, please try the following help resources for further guidance. Visit the MSI website for technical guide, BIOS updates, driver updates and other information via https://www.msi.com/support/
37

References

• dtsc.ca.gov/perchlorate/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>