tp-link Festa F52-Wall, Festa F65-Wall Wall Plate Access Point Instructions

tp-link Festa F52-Wall, Festa F65-Wall Wall Plate Access Point

Product Specifications

• Model: Festa AP_Wall Plate
• Operating Frequency:
  • Festa F52-Wall : 2412MHz–2472MHz(20dBm), 5150MHz–5250MHz(23dBm)
  • Festa F65-Wall : 2412MHz–2472MHz(20dBm), 5150MHz–5250MHz(23dBm), 5250 MHz -5350 MHz (23dBm), 5470 MHz -5725 MHz (30dBm)
• Regulatory Compliance: FCC, CE Mark, EU Declaration of Conformity, UKCA Mark, Canadian Compliance, Korea Warning Statements
• Safety Information:
  • Keep away from water, fire, humidity, or hot environments
  • Do not attempt to disassemble, repair, or modify the device
  • Operate in temperatures ranging from 0 to 40 degrees Celsius (32 to 104 degrees Fahrenheit)
• RF Exposure Information: Complies with EU requirements on exposure to electromagnetic fields
• Industry Standards: CAN ICES-3 (B)/NMB-3(B)

Product Usage Instructions

1. Installation: Follow the manufacturer’s instructions for mounting the wall plate securely.
2. Power On: Connect the wall plate to a power source compatible with the device’s voltage requirements.
3. Wireless Connectivity: Ensure the device is within the specified frequency range for optimal performance.
4. Safety Precautions: Keep the device away from water, fire, and extreme environments. Do not attempt to tamper with the device’s internal components.

FCC

FCC Compliance Information Statement

• Product Name: Wall Plate Access Point
• Model Number: Festa F52-Wall / Festa F65-Wall
• Responsible party:
• TP-Link USA Corporation
• Address: 10 Mauchly, Irvine, CA 92618
• Website: https://www.tp-link.com/us/
• Tel: +1 626 333 0234
• Fax: +1 909 527 6804
• E-mail : sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement:

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter.”

We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.

CE Mark Warning

This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
OPERATING FREQUENCY (the maximum transmitted power)

Festa F52-Wall:

• 2412MHz—2472MHz(20dBm)
• 5150MHz—5250MHz(23dBm)
• For Festa F65-Wall:
• 2412MHz—2472MHz(20dBm)
• 5150MHz—5250MHz(23dBm)
• 5250 MHz -5350 MHz (23dBm)
• 5470 MHz -5725 MHz (30dBm)
• EU Declaration of Conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2011/65/EU and (EU)2015/863.
The original EU Declaration of Conformity may be found at https://www.tp- link.com/en/ce.

RF Exposure Information
This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection.
The device complies with RF specifications when the device used at 20 cm from your body.

National Restrictions
Attention: This device may only be used indoors in all EU member states, EFTA countries and Northern Ireland.

For F52-Wall:

Frequency band: 5150 – 5250 MHz:
Indoor use: Inside buildings only. Installations and use inside road vehicles and train carriages are not permitted. Limited outdoor use: If used outdoors, equipment shall not be attached to a fixed installation or to the external body of road vehicles, a fixed infrastructure or a fixed outdoor antenna. Use by unmanned aircraft systems (UAS) is limited to within the 5170 – 5250 MHz band.

For F65-Wall:

Frequency band: 5150 – 5250 MHz:
Indoor use: Inside buildings only. Installations and use inside road vehicles and train carriages are not permitted. Limited outdoor use: If used outdoors, equipment shall not be attached to a fixed installation or to the external body of road vehicles, a fixed infrastructure or a fixed outdoor antenna. Use by unmanned aircraft systems (UAS) is limited to within the 5170 – 5250 MHz band.

Frequency band: 5250 – 5350 MHz:
Indoor use: Inside buildings only. Installations and use in road vehicles, trains and aircraft are not permitted. Outdoor use is not permitted.

Frequency band: 5470 – 5725 MHz:
Installations and use in road vehicles, trains and aircraft and use for unmanned aircraft systems (UAS) are not permitted.

UKCA Mark

• UK
• CA

UK Declaration of Conformity
TP-Link hereby declares that the device complies with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017.
The original UK Declaration of Conformity may be found at https://www.tp- link.com/support/ukca

National Restrictions
Attention: This device may only be used indoors in Great Britain.

Canadian Compliance Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Caution
For Festa F52-Wall:

1. The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; 5150 MHz to 5350 MHz is restricted to indoor operations in Hong Kong.

For Festa F65-Wall:

1. The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; 5150 MHz to 5350 MHz is restricted to indoor operations in Hong Kong.
   DFS (Dynamic Frequency Selection) products that operate in the bands 5250- 5350 MHz, 5470-5600MHz, and 5650-5725MHz. Avertissement

Pour Festa F52-Wall:

1. Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;

Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)

Safety Information

• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use the device where wireless devices are not allowed.
• Operating Temperature: 0℃ ~ 40℃ (32 ℉ ~ 104 ℉ )
• This product uses radios and other components that emit electromagnetic fields. Electromagnetic fields and magnets may interfere with pacemakers and other implanted medical devices. Always keep the product and its power adapter more than 15 cm (6 inches) away from any pacemakers or other implanted medical devices. If you suspect your product is interfering with your pacemaker or any other implanted medical device, turn off your product and consult your physician for information specific to your medical device.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Explanation of the symbols on the product label

Note: The Equipment marking is at the bottom of the device. Symbols may vary from products.

Mounting Requirements

For safety, we recommend you to use the original screws in the package when mounting. The following are alternatives to mount the device on the wall:

• (For Festa F52-Wall) Use a 86 mm/standard EU/standrad US wall junction box and 2–4 screws which comply with ANSI B1.1 4#, 6# or 8# standard and are longer than 8.5 mm.
• (For Festa F65-Wall) Use a 86 mm/standard EU/standrad US wall junction box and 2–4 screws which comply with ANSI B1.1 4#, 6# or 8# standard and are longer than 10 mm.

© 2024 TP-Link 1910013651 REV1.0.0

Frequently Asked Questions

• Q: Can the Festa AP_Wall Plate be used outdoors?
  • A: No, this device is designed for indoor use only as stated inthe safety information.
• Q: What should I do if the device malfunctions?
  • A: Contact customer support for assistance. Do not attempt to repair the device yourself.
• Q: Is it safe to operate the device near my body?
  • A: The device complies with RF exposure limits when used at a minimum distance of 20cm from the body.

References

• Link: Simple, secure one-click payments
• CE Regulatory Compliance | TP-Link
• Regulatory Compliance | TP-Link
• WiFi Networking Equipment for Home & Business | TP-Link

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>