mustard The Standard Ocean Installation Guide
- September 3, 2024
- mustard
Table of Contents
The Standard Ocean
“`html
Specifications:
- Dimensions: [Insert dimensions here]
- Material: [Insert material here]
- Color options: [Insert available colors here]
- Weight: [Insert weight here]
Product Usage Instructions:
Building the Locker:
-
Slot the central divide into the notches on the leg frames.
Make sure the legs face the right way. -
Push the side panels onto the legs and slide the middle frames
onto the legs. -
Fold down the tabs on the corners of the back panels.
-
Add the bases, starting at the front, then push them down into
place. -
Push the back panels into place, starting at the bottom.
-
Add the top panel starting at the front. (May require an extra
pair of hands)
Attaching Doors and Handles:
-
Insert the post and large washer in the hole in the leg.
-
Slide door onto the post. At the top of the door, insert the L
shape post up into position through the holes. Push the tab up to
hold the door in place. Add the other three doors. -
Use your screwdriver to attach the handles with the small
screws and small washers.
Final Touches:
Pop the spare keys in a safe spot for future use.
FAQ:
Q: Do I need any special tools to assemble this locker?
A: All you need is one crosshead screwdriver for attaching
handles.
Q: How can I make sure the panels are slotted in
correctly?
A: Check from all angles that the side and back panels are
slotted in correctly. Take your time and adjust as needed.
Q: What if I encounter difficulties during assembly?
A: Refer to our helpful how-to videos or reach out to
help@mustardmade.com for assistance.
“`
How to build
The Standard
We’ve designed our lockers to be beautifully simple to put together. All you
need is one crosshead screwdriver for the handles, and the rest just slots
into place!
Watch our helpful how-to videos where we take you through the build step by
step.
Learn more about securely attaching the product to the wall using the correct
fittings (not provided).
1
Slot the central divide into the notches on the leg frames.
TIP: make sure the legs face
the right way!
A
A
Push the side panels onto
2
the legs. Slide the middle
frames onto the legs.
TIP: the slots go at the top!
B
C
C
C
B
4
Fold down the tabs on the corners of
the back panels.
5
Add the bases, starting at the front. 5
(back)
6
7
8
Push the bases
down into place.
(front)
D
D
D
5
6
7
8
7
Check from all angles that the side + back panels are slotted in correctly. Click the top
into place.Take your time. You may need to
pull the top panel into the right spot.
F (inside)
click
F
8
Add the brackets
9
+ place the
10
shelves on top.
(underside)
(underside)
G
9 10
G
10 9
3
Push the back panels into place, 1
starting at the
bottom.
(top)
2
3
4
(bottom)
1 2
3
4
6
Add the top panel starting at the front.
(You will need an
extra pair of hands
for this bit!)
E
(back) (underside)
(front)
E TIP: the top should sit in the slot in the middle frame.
9
Insert the post + large washer in the hole in the leg.
H
H
12 x brackets
4 x posts
4 x large washers
4 x
8 x
L shape posts screws
10 Slide door onto the post. At the top of the door, insert the L shape post up into position through the holes. Push the tab up to hold the door in place. Add the other three doors.
8 x small washers
4 x handles
4 x
sets of keys
(attached to door)
4 x keyrings
11
Grab your
Use your screwdriver
screwdriver! to attach the handles
with the small screws
+ small washers.
12
Now that’s how you set The Standard!
You’re seriously impressive!
P.S. Pop the spare keys in a safe spot just in case!
J
J
you got this!
Watch our helpful how-to videos where we take you through the build step by
step. Need help? help@mustardmade.com
Love your locker? Share it! @mustardmade #mustardmade
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>