Lenco TCD-2571 Wooden Turntable with Bluetooth FM DAB Radio Instruction Manual

Model: TCD-2571
User Manual – Wooden Turntable with Bluetooth,
FM/DAB+ radio, USB encoding, CD and Cassette Player

CAUTION:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

1. Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2”) free space around the whole device.

2. Install in accordance with the supplied user manual.

3. Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-generating products or naked flame. The device can only be used in moderate climates. Extremely cold or warm environments should be avoided. Working temperature between 0° and 35°C.

4. Avoid using the device near strong magnetic fields.

5. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a static-free environment.

6. Warning! Never insert an object into the product through the vents or openings. High voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or liquid on the product.

7. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.

8. The device shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on or near the apparatus.

9. Do not use this device when condensation may occur. When the unit is used in a warm wet room with damp, water droplets or condensation may occur inside the unit and the unit may not function properly; let the unit stand in power OFF for 1 or 2 hours before turning on the power: the unit should be dry before getting any power.

10. Although this device is manufactured with the utmost care and checked several times before leaving the factory, it is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.

11. This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.

12. Keep away from animals. Some animals enjoy biting on power cords.

13. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids. To remove severe stains, you may use a damp cloth with dilute detergent.

14. The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device or battery replacement.

15. Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data may be corrupted or lost.

16. If the unit has USB playback function, the USB memory stick should be plugged into the unit directly. Don’t use an USB extension cable because it can cause interference resulting in failing of data.

17. The rating label has been marked on the bottom or back panel of the device.

18. This device is not intended for use by people (including children) with physical, sensory or mental disabilities, or a lack of experience and knowledge, unless they’re under supervision or have received instructions about the correct use of the device by the person who is responsible for their safety.

19. This product is intended for non professional use only and not for commercial or industrial use.

20. Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable position vibrations or shocks or by failure to follow any other warning or precaution contained within this user manual will not be covered by warranty.

21. Never remove the casing of this device.

22. Never place this device on other electrical equipment.

23. Do not allow children access to plastic bags.

24. Only use attachments/accessories specified by the manufacturer.

25. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as the power supply cord or the plug, when liquid has been spilled or objects have fallen into the device, when the device has been exposed to rain or moisture, does not operate normally, or has been dropped.

26. Long exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss.

27. If the product is delivered with power cable or AC power adaptor:
    • If any trouble occur, disconnect the AC power cord and refer servicing to qualified personnel.
    • Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit point. Do not place heavy items on the power adaptor, which may damage it. Keep the entire device out of children’s reach! When playing with the power cable, they can seriously injure themselves.
    • Unplug this device during lightning storms or when unused for a long period.
    •  The socket outlet must be installed near the equipment and must be easily accessible.
    •  Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.
    • Devices with class 1 construction should be connected to a main socket outlet with a protective earthed connection.
    • Devices with class 2 construction do not require a earthed connection.
    • Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can cause a short circuit.
    •  Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock.

28. If the product contains or is delivered with a remote control containing coin/cell batteries: Warning:
    •  “Do not ingest battery, Chemical Burn Hazard” or equivalent working.
    • [The remote control supplied with] This product contains a coin/button cell battery. If the battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
    •  Keep new and used batteries away from children.
    •  If the battery compartment does not close securely, stop using the product and keep it away from children.
    •  If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

29. Caution about the use of Batteries:
    •  Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
    •  Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation.
    • Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
    • Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
    • Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or that leakage of flammable liquid or gas.
    • A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
    • Attention should be drawn to the environmental aspects of battery disposal.

INSTALLATION

• Unpack all parts and remove protective material.
• Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.

WARNING
Class 1 Laser Product

CLASS 1 LASER PRODUCT
CAUTION
INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM
This product contains a low power laser device.
Warning: Do not touch the lens.

Your new unit was manufactured and assembled under strict standard quality control. Thank-you for purchasing our product for your music enjoyment. Before operating the unit, please read this instruction manual carefully. Keep it also handy for further future references.

LOCATION OF CONTROLS

1. USB SOCKET
2. 3.5MM AUX-IN JACK
3. 3.5MM HEADPHONE JACK
4. FUNCTION BUTTON (DAB/FM/
BLUETOOTH/CD/USB/PHONO/TAPE/AUX)
5. VOLUME KNOB/POWER STANBY
6. CD DOOR
7. REMOTE SENSOR
8. POWER LED
9. LCM DISPLAY
10. MENU BUTTON
11. INFO BUTTON
12. SCAN BUTTON
13. PRESET BUTTON
14. ENTER/EQ BUTTON
15. PLAR/PAUSE BUTTON
16. STOP BUTTON
17. DN/F-R BUTTON
18. UP/F-F BUTTON
19. REC/DEL (RECORD BUTTON/DELETE BUTTON)
20. CD DOOR OPEN/CLOSE BUTTON
21. TUNING BOTTON/PLAY.MODE| 22. PLASTIC FOOT PAD
23. SPEAKERS
24. TAPE STOP/EJECT BUTTON
25. CASSETTE MECHANISM
26. DUST COVER
27. DUST COVER PAD
28. HINGE
39. CARTRIDGE
30. PICK-UP HOLDER
31. 33/45/78 RPM SPEED SELECTOR
32. TONE ARM
33. Auto-stop ON/OFF
34. TURNTABLE PAUSE SWITCH
35. ADAPTOR
36. TURNTABLE
37. FM/DAB ANTENNA
38. ON/OFF SWITCH
39. AC POWER CORD
40/41. LINE OUT SOCKETS(R+L)
---|---

REMOTE CONTROL

1. POWER ON/OFF
2. OPEN/CLOSE CD DOOR
3. REC: in CD/AUX IN/DAB/PHONO/CASSETTE/BT mode,
press to active recording function.
4. DELETE BUTTON
5. MODE BUTTON to select source CD/USB/BT/DAB/FM/TAPE/PHONO/AUX IN.
6. STOP BUTTON
7. REPEAT BUTTON to select repeat playback (CD/USB).
8. PROGRAM: in CD/USB mode, press to active programming function.
9. PLAY/PAUSE/SCAN: in CD/USB mode, press once to start playback, press again to enter pause
mode. Start a full scan in DAB or FM.
10. VOLUME + BUTTON| 11. VOLUME – BUTTON
12. SKIP- BUTTON/REWIND BUTTON
13. SKIP+ BUTTON/FAST FORWARD BUTTON
14. NUMBER BLOCK 0-9
15. 10+ Track Button to select 2-digit numbers.
16. ENTER/EQ BUTTON
17. MENU BUTTON
18. INFO BUTTON to show information in  DAB/FM/CD.
19. PRESET BUTTON to open the favorite list and recall a station.
20. TIMER BUTTON: sleep timer
---|---

Batteries for Remote Control

The infrared remote control requires 2xAAA Batteries (excluded)
A) Remove the battery compartment cover
B) Insert 2xAAA batteries according to the markings inside the compartment.
C) Close the compartment.

POWER SUPPLY
This unit operates from a main supply of 100-250V~ 50Hz/60Hz. Connect the AC power cord to the AC household main outlet. Ensure that the voltage is as indicated on the rating plate on the rear of the unit.
Connect the unit to the power supply. Switch ON/OFF SWITCH (30) to ON position to turn the unit ON. Switch ON/OFF SWITCH (30) to OFF position to switch the unit OFF.
This unit has two working modes:
STANDBY MODE: The display shows the current time and the speakers and backlight are off.
PLAYBACK MODE: The blue backlight is on and you can listen to music.
When no sound is produced, the unit will switch to STANDBY MODE automatically after 15 minutes.
To switch between PLAYBACK MODE and STANDBY MODE,. Push the volume/power knob once is ON, push the Volume/Power knob again is OFF

SLEEP SETTING

1. This function enables you to go to sleep listening to the Radio.
2. While listening to music, press and hold TIMER (20 on remote) and press TIMER again to select between OFF/15/30/45/60/90.

The radio will turn off automatically after the selected sleep timer.

SYSTEM SETTINGS
In all modes, press MENU button (21) (17 on remote) and select SYSTEM:

• Alarm: select this option to set the alarm.
• Time: select this option to set the date and time.
• Backlight: select this option to change timeout/on level/display illumination.
• Language: select this option to change the system language.
• Factory Reset: select this option to reset the device to factory settings.
• Software Upgrade: select this option if a new software version is released.
• SW version: select this option to see the current software version.

TIME SETTING

1. Press MENU button (21) (17 on remote) and select SYSTEM to Time option.
2. Set time/date. Press SKIP+/- (16/15) (12/13 on remote) repeatedly to select 12/24 digits for hour. Press ENTER/EQ button (25) (16 on remote) again to confirm.
3. The hour digits will flash on the display. Press SKIP+/- (16/15) (12/13 on remote) repeatedly to set the correct hour. Press ENTER/EQ button (25) (16 on remote) again to confirm.
4. The minute digits will flash on the display. Press SKIP+/- (16/15) (12/13 on remote) repeatedly to set the correct minute. Press ENTER/EQ button (25) (16 on remote) again to confirm.
5. The day digits will flash on the display. Press SKIP+/- (16/15) (12/13 on remote) repeatedly to set the correct year. Press ENTER/EQ button (25) (16 on remote) again to confirm.
6. The month digits will flash on the display. Press SKIP+/- (16/15) (12/13 on remote) repeatedly to set the correct month. Press ENTER/EQ button (25) (16 on remote) again to confirm.
7. The year digits will flash on the display. Press SKIP+/- (16/15) (12/13 on remote) repeatedly to set the correct day. Press ENTER/EQ button (25) (16 on remote) again to confirm.

SETTING THE ALARM

1. Press MENU button (21) (17 on remote) and select SYSTEM to Alarm option or Simply press TIMER (20 on remote) repeatedly select Alarm 1 or 2.
2. Then press ENTER/EQ button (25) (16 on remote) to begin Alarms setting. You can press SKIP (12 or 13 on remote) and ENTER/EQ button to set ON TIME, Duration, Alarm Source, Alarm Frequency, and Alarm Volume Level, etc.
3. Once all the settings are done, you will see “Alarm Saved” and Alarm icon 1 or 2 on display
4. Once Alarm OFF is set, the Alarm Icon will disappear.

DAB MODE
Press function button (10) (5 on remote) repeatedly to select DAB mode.
Press SKIP+/- (16/15) (12/13 on remote) to search the program

DAB MENU
Press MENU (21) (17 on remote) to access to the options.

• Full Scan: select this option to perform a full scan of the available DAB programs. You can press SCAN (23) to perform the same action.
• Manual Tune: select this option to select manually the DAB frequency.
• DRC: select this option to choose between DRC low, DRC high and DRC off.
• Prune: clear unavailable stations from the station List

DAB PRESET
You can program a maximum of 20 preset radio stations.

• Press and hold PRESET (24) (19 on remote). PRESET STORE will appear on display.
  Press SKIP+/- (16/15) (12/13 on remote) to select the preset number. Press ENTER (9) (16 on remote) to confirm.

• Press PRESET (24) (19 on remote) to navigate through the presets.

DAB INFO
Repeatedly press INFO (22) (18 on remote) to see the following information NAME/KBPS/DATE/TIME.

IMPORTANT INFORMATION REGARDING DAB+ RECEPTION
DAB+ radio reception is different from FM radio reception.

• In FM, you can often still receive a weak station, but probably with a rustling or crackling sound.

• DAB + reception works digitally and if there is not enough signal you hear nothing.
  No hiss or crackle as with FM. This is not due to the radio, but to the fact that there is not enough DAB+ signal at that location.

• DAB + rule is: no or weak reception = no sound.

What can you do if you do not have direct DAB+ reception.

• Always point the antenna straight up vertically first.
• Do not place the radio too close to potential sources of interference such as, battery chargers, rotating machinery, computers, large metal surfaces, etc.
• Move the radio a few meters.
• Turn on the radio and activate a full scan in the DAB+ menu
• In the display of the radio you will see the progress of the scan and the number of stations found in the current position of the radio.

Important

• With DAB+ reception, there can be a very big difference in reception level between one location and “a few meters away”. In case of a local weak DAB+ signal, move the radio to find a stronger signal.
• If you take the radio to another location, perform a full scan again. This will show you which DAB+ stations can be received there.

FM MODE
Press function button (10) (5 on remote) repeatedly to select FM mode.
Turn the TUNING KNOB (27) to manually select the frequency.

FM MENU
Press MENU (21) (17 on remote) to access to the options.

• Scan Setting: select this option to choose between scanning all stations or only the strong stations.
• Audio Setting: select this option to choose between forcing mono audio or allowing stereo Sound.

FM PRESET
See DAB PRESET instructions.
FM INFO
Repeatedly press INFO (22) (18 on remote) to see the following information: KIND OF PROGRAM/FREQUENCY/AUDIO/DATE/TIME.

LISTENING TO TAPE

1. Press function button (10) (5 on remote) repeatedly to select TAPE mode.

2. Load a cassette tape into the unit. The system will start playback automatically after inserting the cassette tape.

3. Press FFD/EJ (5) half inwards during playback mode. The tape will wind forward.
   Slightly press FFD/EJ (5) again to resume playback.

4. Press FFD/EJ (5) completely inwards and the cassette tape will be ejected through the CASSETTE MECHANISM (6).

PLAYING COMPACT DISC

1. Press function button (10) (5 on remote) repeatedly to select CD mode.
2. Press CD DOOR OPEN/CLOSE BUTTON (18) (2 on remote) to open the CD door. Place a CD with the printed side facing up inside the tray, then close the CD door. The first track will start playback.

• Press SKIP -/+ (16/15) (12/13 on remote) to select your favorite tunes. If you hold SKIP -/+ (16/15) (12/13 on remote), the playing track will go fast backward or forward until you release the button.
• Press PLAY/PAUSE (13) (9 on remote) to pause the playback. The track number will start blinking. Press PLAY/PAUSE (13) (9 on remote) again to resume the playback.
• Press STOP (14) (6 on remote) to stop the playback.

REPEAT/RANDOM PLAY MODE
During CD/USB playback, repeatedly press (7) on remote to select:

• Repeat1: The current track is played repeatedly.
• Repeat DIR: The current folder is played repeatedly.
• Repeat All: All tracks are played repeatedly.
• SHUFFLE: a random selection of disc tracks.
• INTRO: to hear the first 10 seconds of a track.

CD PROGRAMMING
You can program up to 99 tracks to play in any desired order.

1. Insert a disc and press STOP (14) (6 on remote) when it starts playing.
2. Press (8) on remote. “P01” will be shown on the display.
3. Press SKIP -/+ (16/15) (12/13 on remote) to select your favorite tunes.
4. Press (8) on remote to store the track in the program memory. “P02” will be shown on the display.
5. Repeat steps 3-4 to select and store all desired tracks.
6. Press PLAY/PAUSE (13) (9 on remote) to start program play.
7. Press STOP (14) (6 on remote) once to stop the program play. Press STOP (14) (6 on remote) twice to clear program.

How to Open/Close the Turntable Cover
To Open:

• Lift the Turntable cover all the way up until it stops.
• Lower the cover slowly until the latch engages. If the latch does not engage, pull the lower bar by hand.
• The cover will now stay open.

To Close

• Lift the cover all the way up until it stops.
• The latch should disengage. Slowly lower the cover. If the latch does not disengage, push out the lower bar by hand.
• Make sure you hold the cover carefully to avoid pinching your fingers as it closes.

LISTENING TO RECORDS

VERY IMPORTANT! (This operation only limited to the large turntable with this function)

1. Press MODE (10) (5 on remote) repeatedly to select PHONO mode.
2. Open the Record Player Cover. Release the Tonearm Clamp, and remove the stylus protector. Place a record on the turntable, over the central spindle. Place the EP adapter over the central spindle when playing 17cm EP records.
3. Set 33/45/78 RPM SPEED SELECTOR (34) to 33/45/78 rpm according to the record.
4. Lift the Tonearm with the Tonearm Lift Lever. Move the tonearm to the beginning of the record, or to the start of a particular track. Gently lower the tone arm onto the record with the Tonearm Lift lever to start playing.
5. When the record is finished the tonearm will automatically stop to the rest. To stop manually, lift the tonearm from the record and return it to the rest.
6. Moving or jarring the turntable without securing the Tonearm clamp could result in damage to the Tonearm. Place the protective cap on the stylus when not in use.

Installing the Stylus

1. Hold the tip of the stylus and insert the stylus by pressing as shown in direction “B”.
2. Push the stylus upward as in direction “C” until the stylus locks into the tip position.

NOTES
We advise you to clean your records with an anti-static cloth to gain maximum enjoyment from them.
We would also point out that for the same reason your stylus should be replaced periodically (approximately every 250 playback hours)
AUX-IN
This unit provides an auxiliary audio input jack for connecting external audio device like MP3 players, CD players and allow playback of your external source through the system speakers.

1. Use an audio cable (not included) with a RCA stereo plugs on one end of the cable. Plug one end into the AUX-IN jack on the main unit and plug the other end of the cable into the LINE OUT or HEADPHONE Jack of your external audio device.
2. Turn ON the unit and your external audio device. Press function button (10) (5 on remote) repeatedly to select AUX IN mode
3. Start to play the external device (see the user manual of the external device).

BLUETOOTH OPERATION

1. Press function button (10) to select BLUETOOTH function. “Bluetooth” will be shown on the display.
2. Select from your portable device (Smartphone, Tablet…) the ID Bluetooth tagged as Lenco TCD-2571WD, then confirm connection.
3. When the pairing is successful the LCM will stop blinking.
4. Now you can transfer the music to the Lenco TCD-2571WD and all operations can only be operated from your mobile device.

This product operates at 2400 – 2483.5 MHz and is designated only to be used inside a normal household environment. This product is suited for this purpose within all EU counties.

ENCODING FROM Radio/DAB Radio
Plug USB Disk into USB socket. Press function button (17)(5 on remote) to switch the device to DAB or FM mode, using the TUNNING control tune or press SKIP+/- (16/15) (12/13 on remote) in the station from where you want to record the broadcast. Press the REC/DEL Button (17) (3 on remote) twice to start recording and “REC” will flashing on the display. Press STOP button (14) (6 on remote) to stop recording.
ENCODING FROM CD
Plug USB Disk into USB socket. During CD playing mode, press the REC/DEL button (17) (3 on remote) twice-ONE will flash on the display, it means we can select the song currently playing to be recorded; if wanted to select the entire CD to be recorded, press again Forward Skip button and “ALL” will flash on the display, press again REC/DEL button to start recording. Press STOP button (14) (6 on remote) to stop recording.

ENCODING FROM CD-MP3
The procedure to record from CD MP3 is the same as the one above, only instead of audio CD, if wanted to select the whole file folder (if CD have multiple folders) to be recorded, press Forward Skip button and “REC-FOLDER” will flash on the display, press again REC/DEL button to start recording. Press STOP button (14) (6 on remote) to stop recording.

ENCODING FROM CASSETTE
Plug USB Disk into USB socket. During TAPE playing mode, press the REC/DEL button (17) (3 on remote) twice to starting recording and “REC” will flash on the display. Press STOP button (14) (6 on remote) to stop recording.

ENCODING FROM PHONO
Plug USB Disk into USB socket. During PHONO playing mode, moving the tone arm over the desired place on the record and lower it on the record, press the REC/DEL button (17) (3 on remote) twice to starting recording and “REC” will flash on the display. Press STOP button (14) (6 on remote) to stop recording.
ENCODING FROM BLUETOOTH
Plug USB Disk into USB socket. During BLUETOOTH playing mode, press the REC/DEL button (17) (3 on remote) twice to starting recording your desired music and “REC” will flash on the display. Press STOP button (14) (6 on remote) to stop recording.
ENCODING FROM AUX
Plug USB Disk into USB socket. During AUX playing mode, to switch the external signal source to playback and press the REC/DEL button (17) (3 on remote) twice to starting recording, “REC” will flash on display. Press STOP button (14) (6 on remote) to stop recording.

PLAYBACK FROM USB

1. Insert the USB device’s plug into the USB socket.
2. Press function button (10) (5 on remote) repeatedly to select USB mode.
3. The unit will start reading the device automatically after the connection.
4. Use the same procedure as CD to listen to your USB device.

DELETE USB

1. During playback, press and hold REC/DEL (17) (4 on remote). “DEL” will be shown on the display.
2. Press SKIP -/+ (16/15) (12/13 on remote) repeatedly to select between ONE/FOLDER/ALL.
3. Press REC/DEL (17) (4 on remote) again to confirm.

EQ OPERATION
During playing mode, press the ENTER/EQ BUTTON (16 on remote) to choose from different sound effect among FLAT/POP/CLASSIC/ROCK/JAZZ/BASS.
SPECIFICATIONS
AC: 100-250v ~ 50Hz/60HZ
FM: 87.5 – 108MHz
DAB Band: BAND III
Design and specifications are subject to change without notice.

Guarantee

Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.

Disclaimer

Updates to Firmware and/or hardware components are made regularly.
Therefore some of the instruction, specifications and pictures in this documentation may differ slightly from your particular situation. All items described in this guide for illustration purposes only and may not apply to particular situation. No legal right or entitlements may be obtained from the description made in this manual.
Disposal of the Old Device
**** This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive).

DECLARATION OF CONFORMITY

Hereby, Commaxx declares that the radio equipment type [Lenco TCD-2571] is in compliance with directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
https://commaxx-certificates.com/doc/tcd-2571_doc.pdf

Service
For more information and helpdesk support, please visit www.lenco.com
Commaxx B.V. Wiebachstraat 37, 6466 NG
Kerkrade, The Netherlands.

References

• Lenco.com | Officiële Lenco Webshop‎
• Lenco.com | Officiële Lenco Webshop‎

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>