REMARK RK-C3076A-01, RK-C3076A-01T Sports Touring Catback Exhaust Installation Guide

RK-C3076A-01, RK-C3076A-01T Sports Touring Catback Exhaust

“`html

Specifications:

• Manufacturer: ACURA

• Year: 2023+

• Model: INTEGRA TYPE S

• Trim: DE5

• Chassis Code: RK-C3076A-01 /
  RK-C3076A-01T

• Description: CATBACK CONFIG. SUS304 FRONT
  OVERPIPE / RESONATED MIDPIPE & MUFFLER

Product Usage Instructions:

1. We recommend installation to be performed by a trained and/or
   qualified technician.

2. Unplug the harness from OE exhaust valve motor and zip tie the
   harness up, out of the way.

3. Remove the front lower splash shield to gain access to the
   front overpipe.

4. Remove OEM exhaust and/or exhaust components including the
   front overpipe.

5. Install REMARK exhaust components using the original rubber
   hangers unless otherwise noted.

6. We recommend starting from the front first and working your way
   rearwards.

7. Install all gaskets and hardware. Leave the hardware hand
   tight.

8. Align flanges, gasket, and snug all hardware so that sections
   cannot move.

9. Check positioning of the exhaust piping, resonator, muffler(s),
   and tips(s). Reposition if needed by loosening hardware, adjust
   position, and retighten hardware.

10. When placement is confirmed, tighten all hardware to
    recommended torque spec.

11. Gently shake/move the exhaust system to ensure there is proper
    clearance around the entire system, especially the tips to
    bumper.

12. Thoroughly wipe down the exhaust system from any grease, dirt,
    handprints, fingerprints, etc., as these may cause a permanent
    stain once the exhaust reaches operating temp.

13. Re-install the front lower splash shield.

14. Start the engine.

15. Check for any leaks, fitment issues, rubbing, etc.

16. Re-check for exhaust leaks, fitment issues, and re-torque all
    hardware after ~100 miles of driving.

Note: All system components should be
inspected, and ALL hardware retightened at normal service intervals
(every 3000-5000 miles).

Frequently Asked Questions (FAQ):

Q: What is the warranty coverage for the product?

A: The product comes with a 1-year limited manufacturer defect
warranty from the date of purchase. All warranty claims are subject
to inspection by REMARK at their facility. The limited warranty
applies only to the original purchaser of the product.

Q: What situations are not covered under warranty?

A: Product finishes are not covered under warranty as they are
considered wear & tear. No warranty will be valid if the defect
was caused by abuse, negligence, mishandling, weather conditions,
natural disasters, road/off-road conditions, accidents/collisions,
or fitment issues on non-US spec vehicles.

“`

MANUFACTURER: YEAR: MODEL: TRIM: CHASSIS CODE: REMARK PART #: DESCRIPTION:

PRODUCT INFORMATION
ACURA 2023+ INTEGRA TYPE S DE5 RK-C3076A-01 / RK-C3076A-01T CATBACK CONFIG. SUS304 FRONT OVERPIPE / RESONATED MIDPIPE & MUFFLER

No. Description

Part Num. Qty

Torque

1 3″ Composite 3-bolt Gasket

76C3-H07 1

2 3″ Composite 3-bolt Gasket

76C3-H06 1

3 3″ Composite 2-Bolt Gasket

P

4 M10 Serrated Hex Head Bolt L=40mm

A

5 M10 Serrated Nut

R

A 3″ Front Over Pipe

T

B Front Resonated Mid-pipe

S

C Rear Mid-Pipe

76C2-01 2

M10B35 7

M10N

7

N/A

1

N/A

1

N/A

1

~42 ft-lbs. ~42 ft-lbs.

D Rear Muffler Section
L

I

1

2

S

T

N/A

1

3

3.1in / 76.2mm

4.34in / 110.3mm

3.1in / 76.2mm

4.4in / 112.9mm

3.0in / 76.5mm

5.1in / 128.7mm

3.7in / 94.3mm

P A R T S
L A Y O U T
A
1

B 2+4+5

C 3+4+5

D
3+4+5
Front of Vehicle

1. We recommend installation to be performed by a trained and/ or qualified technician.

2. Unplug the harness from OE exhaust valve motor and zip tie the harness up, out of the way

I

**NO CEL or any type of malfunction will be triggered by disconnecting the exhaust valve motor

N

3. Remove the front lower splash shield to gain access to the front overpipe

S

4. Remove OEM exhaust and or exhaust components include the front overpipe

T

5. Install REMARK exhaust components using the original rubber hangers unless otherwise noted.

A

6. We recommend starting from the front first and working your way rearwards.

L

7. Install all gaskets and hardware. Leave the hardware hand tight.

L

8. Align flanges, gasket, and snug all hardware so that sections cannot move.

A

9. Check positioning of the exhaust piping, resonator, muffler(s), and tips(s). Reposition if needed by loosening

T I

hardware, adjust position and retighten hardware. 10. When placement is confirmed, tighten all hardware to recommend torque spec. 11. Gently shake/ move the exhaust system to ensure there is proper clearance around the entire system, especially

O

the tips to bumper.

N

12. Throughly wipe down the exhaust system from any grease, dirt, handprints, fingerprints, etc… as these may cause

a permanent stain once the exhaust reaches operating temp.

13. Re-install the front lower splash shield

14. Start the engine

15. Check for any leaks, fitment issues, rubbing, etc..

16. Re-check for exhaust leaks, fitment issues, and re-torque all hardware after ~100 miles of driving.

** We highly recommend that the all system components be inspected, and ALL hardware retightened at

normal service intervals. Every 3000-5000 miles. **

1-year limited manufacturer defect warranty from date of purchase

W

All warranty claims are subject to inspection by REMARK at our facility Limited Warranty only applies to the original purchaser of the product

A

REMARK is not responsible for fitment issues on non-US spec vehicles as all products are developed on US spec

R

models

R

Product finishes are not covered under warranty and considered wear & tear

A

No warranty whatsoever will be valid if the defect was caused by abuse, negligence and/or mishandling. That

N

includes weather conditions, natural disasters, any road/off-road conditions, and any accidents/collision you were

T

part of.

Y

Acidic cleaning products or steel wool are not to be used unless by a trained professional. Some chemical cleaning

products may damage the product and/or finishes.

P

Wear and tear (the damage that happens to our product in ordinary use) is not covered by our limited warranty.

O

Improper installation or misuse of the product may lead to failure and damage to both product and vehicle. The

L I C

user assumes all responsibility. All products are intended for use off-public streets and highways. Vehicle manufacturer warranty may be voided
should any modification(s) or removal(s) of OEM(factory) components are determined. Federal and state law may prohibit the removal, modification or rendering of any device affecting vehicle emis-

Y

sions or state regulated decibel limits. It is the customer’s responsibility to be aware of federal, state and local laws.

User assumes all cost and risks associated with purchase and installation of aftermarket components. REMARK is

not responsible for any fees, fines, or any type of penalties you have received from any authority.

Buyers are responsible for all return shipping fees unless otherwise noted

REMARK does not cover any installation, un-installation, labor fees, or related

REMARK, INC. 16782 HALE AVE, STE A, IRVINE CA 92606 SALES@REMARK-USA.COM 949.366.7661

References

• USA Location information - USA.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>