SOUNDPEATS Opera03 Wireless Earbuds User Guide

: June 16, 2024
: SoundPEATS

Table of Contents

SOUNDPEATS Opera03 Wireless Earbuds
Product Information
Product Usage Instructions
Pairing And Reset
Wearing
Product Diagram And Touch Control
Q&A
FCC Statement
MANUFACTURER
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SOUNDPEATS Opera03 Wireless Earbuds

SOUNDPEATS-Opera03-Wireless-Earbuds-product

Product Information

Specifications

Manufacturer: Shenzhen SoundSOUL Information Technology Company Limited
Model: Opera03
Address: Room 1308-1309, Building B, Huihai Square, Chuangye Road, Longhua District, Shenzhen, China. 518109
Email: support@soundpeats.com
Website: www.soundpeats.com
FCC ID: 2AFTU-DD032
IC ID: 27785-YK004

Frequently Asked Questions

Q: How do I turn on/off the earbuds?
- A: The earbuds can be turned on automatically by opening the charging case or manually by pressing and holding the multifunctional button for 1.5 seconds. To turn them off, you can either put them back in the charging case and close it for automatic power off or manually press and hold the multifunctional button for 10 seconds.
Q: How do I reset the earbuds?
- A: To reset the earbuds, place them back into the charging case, press and hold the button on the side of the charging case for 10 seconds until the lights flash, then close and open the case again.
Q: How do I pair the earbuds with my device?
- A: To pair the earbuds with your device, open the charging case, long press the button on the side of the case until the indicator light flashes, then turn on Bluetooth on your device and select “SOUNDPEATS Opera03” from the list.

Product Usage Instructions

Pairing

To pair the SOUNDPEATS Opera03 earbuds with your device:

Open the charging case and long press the button on the side of the charging case for 3 seconds until the indicator light of the charging case flashes white.
Turn on the Bluetooth of your device and select “SOUNDPEATS Opera03″ to complete the pairing.

Reset

To reset the earbuds:

Place the earbuds back into the charging case, making sure they are correctly placed.
With the charging box open, press and hold the button on the side of the charging box for 10 seconds until the red and white lights of the charging box alternately flash twice.
Close the charging case and open it again to activate the earbuds.

Wearing

To wear the earbuds:

Identify the left and right earbuds.
Rotate the earbuds and find the most comfortable position.

Pairing And Reset

Pairing

SOUNDPEATS-Opera03-Wireless-Earbuds-fig-1

Please open the charging case, then long press the button for 3S on the side of the charging case until the indicator light of the charging case flashes white, then the two earbuds enter the pairing state.
Turn on the Bluetooth of your device and select SOUNDPEATS Opera03 to complete the pairing.

Reset

Place the earbuds back into the charging case, and make sure they are correctly placed.
When the charging box is open, press and hold the button on the side of the charging box for 10S until the red and white light of the charging box alternately flashs twice, and the reset is completed.
Please close the charging case and open it again, the earbuds are activated.

Wearing

SOUNDPEATS-Opera03-Wireless-Earbuds-fig-3

Identify the left and the right earbuds.
Rotate the earbuds and find the most comfortable position.

Product Diagram And Touch Control

Product Diagram

SOUNDPEATS-Opera03-Wireless-Earbuds-fig-4

Touch Control

Power On
- Auto: Open the charging case, the earphones turn on automatically.
- Manually: Under power off state of the earbuds, press and hold the multifunctional button for 1.5S.
Power Off
- Auto: Put the earbuds back to the charging case and close the case. Earphones turn off automatically.
- Manually: Under power on state of the earbuds, press and hold the multifunctional button for 10S.

Play/Pause	Double-tap on the multifunctional button
Volume-	Single-tap on the left multifunctional button
Volume+	Single-tap on the right multifunctional button
Next Track	Press and hold the right multifunctional button for 1.5s

Noise Reduction Mode / Transparent Mode /

Normal Mode Switching

| Press and hold the left multifunctional button for 1.5s
Answer/Hang Up a

Phone Call

| Double-tap the multifunctional button
Reject a Phone Call| Press and hold the multifunctional button for 1.5s
Switch Between Two

Active Calls

| Press and hold the multifunctional button for 1.5s
Activate the Voice

Assistant

| Triple-tap the multifunctional button

Q&A

Q1: What does the charging box indicator mean?

Charging case power display description：
100%-50%| shows green light.
---|---
49%-10%| shows yellow light.
Below 10%| shows red light.
When charging the charging case, the indicator light shows：
Below 20%| red light ashes slowly.
---|---
20%-69%| yellow light ashes slowly.
70%-99%| green light ashes slowly.
100%| green light is keeps on.

Q2: How to charge the charging case?

Connect the Type-C charging adapter to charge it (charging current should not over 1A).
When not in use for a long time, charge it at least once every three months.

Q3: Why is the earbuds still connected to the phone when the charging box is closed?

There is no remaining power in the charging case. When the charging case is out of power, the earbuds can’t disconnect even if they put back to the charging case.
Please make sure the earbuds are properly placed in the charging case and the charging metal and PIN are clean, please try to clean the charging case and earbuds charging contact area with a soft cloth.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment of and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IC ID

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

this device may not cause interference.
this device must accept any interference, including interference that may cause undesired operation of the device.”

RF warning statement