FINISHX FC1100 Ultimate Speed Clear Coat Instructions

FINISHX FC1100 Ultimate Speed Clear Coat

Product Information

Specifications:

• Product Name: FINISHX ULTIMATE SPEED CLEAR COAT 4:1 Spot/Panel Clearcoat
• Color: Transparent
• Theoretical Spreading Rate: 250-300 m2/l at 1 m
• Application: Spot repair, panel repair

Product Usage Instructions

Pre-treatment:
Ensure the surface is clean and dust-free before applying FINISHX ULTIMATE SPEED CLEAR COAT 4:1 Spot/Panel Clearcoat. Refer to the Technical Data Sheet (TDS) of the basecoat for substrate preparation.

Mixing Ratio:
Combine the following volumes for mixing:

• FC-1100 Clear: 100 parts
• FC1010 Fast Activator or FC1020 Standard Activator: 25 parts
• FC1030 Slow Activator: 25 parts

FAQ:

• Q: Can this product be used for DIY projects?
  A: No, the product is suitable for professional use only.

• Q: Where can I get the latest technical data sheet?
  A: You can obtain the latest version of the technical data sheet directly from your supplier or contact the manufacturer.

Product Description

FINISHX ULTIMATE SPEED CLEAR COAT 4:1 Spot/Panel Clearcoat for application ranging from spot repair, panel repair.

Technical Characteristics

• Color: transparent
• Shelf life: 24 months at 77°F
• Theoretical spreading rate: 250-300 m2/l (avg) at 1 μm

Pre-treatment

FINISHX ULTIMATE SPEED CLEAR COAT 4:1 Spot/Panel Clearcoat is suitable to be applied on top of a clean and dust-free FINISHX basecoat. See TDS of basecoat for other preparation of substrate.

• Mixing Ratio
  Mix well and strain before application.
  Note:

  • FC1010 is for temperature below 65°F
  • FC1020 is for temperature between 70°F-90°F
  • FC1030 is for temperatures above 85°F

• Spray Viscosity Potlife

  • 16 to 18 seconds DIN 4 cup at 77°F
  • 1-2 hours at 77°F

• Sprayguns

  • HVLP gravity-feed spraygun
  • 1.2 – 1.3mm
  • 1.5 – 2.0 bar
  • 10 –15 cm
  • Compliant gravity-feed spraygun
  • 1.3 – 1.6mm
  • 3.0 – 4.0 bar
  • 15 – 20 cm

• Application

  • Number of spraycoats: 1 thin + 1 wet coat
  • Flah- off: 2 – 5 mins
  • Film thickness: 40 – 60 μm

• Drying

• IR Drying

  • IR drying after dust free
  • Step 1 – short wave: 5 mins at a 80 cm distance
  • Step 2 – medium wave: 20 mins at a 80 cm distance

• Further Treatment
  Polish after specified drying times and cooling

• PHYSICAL DATA

  • Actual VOC (RTS): 4.2lbs/gal
  • Regulatory VOC (RTS): 4.2lbs/gal (less water and exempt solvents)

The products are suitable for professional use only. The data contained in this publication are based on our current knowledge and experience. You can obtain the latest version of technical date sheet directly from your supplier.

Manufacturer/Supplier: LAUCO PRODUCTS
Address: PO BOX 592548 Orlando FL
32859-2548
Email: info@abcies.com
Telephone: 1 800 208 0259
Manufacturer Emergency Telephone: 1 800 535 5053, Issue 15 Apr 2019

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>