AIRCROSS 3 Video and Photo Gimbal Stabilizer for DSLR Camera

“`html

Product Information

Specifications

• Brand: MOZA

• Model: AirCross 3

• Features: Tilt Motor Lock, Extension Port, Quick Release Plate,
  Tilt Adjustment Slider, Pan Motor Lock, Foldable Safety Lock, Smart
  Trigger, Quick Release Plate Knob, Quick Release Baseplate Knob,
  Roll Knob, Roll Motor Lock, Pan Knob, USB-C Charging Port, Battery
  Indicator Light, Power Button, OLED Screen, Joystick, 1/4”
  Extension Port, Camera Control Port, AI Extension Port, Tilt Knob,
  Foldable Knob, Camera Control Button, Function Button

• Charging Port: USB-C

• Power Source: Built-in Battery

Product Usage Instructions

Preparation

Unfold the Gimbal:

1. Rotate the foldable Knob.
2. Unfold the handle until it is locked.
3. Tighten the knob to prevent the handle from loosening.

Attaching the Tripod:

1. Screw the mini tripod into the screw hole at the bottom of the
   handle.

2. Expand the mini tripod.

Battery Charging:

Please charge the battery through the USB-C charging port using
a USB-C cable (Included) and a USB adapter (Not included). It is
recommended to use a USB adapter with QC2.0 or PD protocol to
complete the charging quickly. The LED light below the charging
port will switch off after the charging is completed.

Unlock the Gimbal

Rotate the motor lock to the unlocked position, and then each
motor can rotate freely.

Note: Do not rotate the motor before unlocking,
otherwise the motor lock may be damaged. If the gimbal is turned on
before unlocking, the gimbal will enter sleep mode.

Mounting the Camera

1. Prepare the camera by ensuring it is fully charged and has a
   memory card with sufficient storage space inserted.

2. Place the camera on the quick release plate with 1/4″ or 3/8″
   screws and keep it centered.

3. Slide the quick release plate onto the baseplate to the locked
   position.

4. Secure the quick release plate and tighten the knob to ensure
   it is locked.

Note:

• If the right side of the camera interferes with the tilt arm
  during installation, adjust the quick-release baseplate position
  for successful installation.

• Ensure the camera’s right side is aligned with the tilt arm for
  stability.

Frequently Asked Questions (FAQ)

Q: Is the MOZA AirCross 3 waterproof?

A: No, the product is not waterproof or dustproof. Please keep
it clear of dust and water to avoid damage.

Q: How should I adjust the balance of the gimbal?

A: Before powering on the gimbal, please adjust the balance
following the instructions in this document to prevent an
unbalanced state that can lead to motor overheating and shortened
battery life.

“`

User Manual

Safety Caution This product is powered by a built-in battery; please do not disassemble it, do
not put it into liquid or fire in order to avoid damage or risk of injury. Before powering on the gimbal, please adjust the balance follow the
instructions in this document. If the gimbal works in an unbalanced state for a long time, the surface temperature of the motor can get hot, which will seriously shorten the battery life.
Do not let children touch and use this product, do not use fingers to obstruct the motor operation to avoid finger injury.
This product is not waterproof or dustproof; please keep the gimbal clear of dust and water to avoid damage.

iOS

Android

Contents

EN

MOZA AirCross 3 Overview

1

Preparation

2

Mounting the Camera

3

Balance Adjustment

4

Operation

5

Advanced Features

6

MOZA Master

9

Specifications

12

AirCross 3

13

14

15

16

17

18

MOZA Master

21

24

25

MOZA AirCross 3 Overview

8

1. Tilt Motor Lock

9

2. Extension Port

1

10

3. Quick Release Plate

4. Tilt Adjustment Slider 2

3

5. Pan Motor Lock 11

6. Foldable Safety Lock

4

7. Smart Trigger

5

12

8. Quick Release Plate Knob

9. Quick Release Baseplate Knob

13

10. Roll Knob

6

14

7

11. Roll Motor Lock

15

12. Pan Knob

13. USB-C Charging Port

14. Battery Indicator Light

15. Power Button

19 20

21 16. OLED Screen

17. Joystick 22

16

18. 1/4” Extension Port

17

23

19. Camera Control Port

24

20. AI Extension Port

21. Tilt Knob

22. Foldable Knob

23. Camera Control Button

18

24. Function Button

1

Preparation
Unfold the Gimbal 1.Rotate the foldable Knob; 2. Unfold the handle until it is locked. 3. Tighten the knob to prevent the handle from loosening.

Attaching the Tripod
1. Screw the mini tripod into the screw hole at the bottom of the handle.

2. Expand the mini tripod

Battery Charging
Please charge the battery through the USB-C charging port using a USB-C cable (Included) and a USB adapter (Not included). It is recommended to use a USB adapter with QC2.0 or PD protocol to complete the charging quickly. The LED light below the charging port will switch off after the charging is completed.

USB-C Port

USB Type-C Cable 2

Unlock the Gimbal Rotate the motor lock to the unlocked position, and then each motor can rotate freely.
lock
unlock
Note: Do not rotate the motor before unlocking, otherwise the motor lock may be damaged. If the gimbal is turned on before unlocking, the gimbal will enter sleep mode.
Mounting the Camera
Make sure to prepare the camera before mounting, confirm the battery is fully charged and a memory card with sufficient storage space is inserted. 1. Place the camera on the quick release plate with 1/4″or 3/8″screws and keep the camera in the center. Remove the extra screws as a spare.
2. Slide the quick release plate onto the baseplate to the locked position.
3. Secure the quick release plate and tighten the knob, make sure the quick release plate is locked.
3

Note: a. When installing the camera, if the right side of the
camera interferes with the tilt arm caused the installation to fail, loosen the knob of the quick-release baseplate and move it to the left until the camera can be installed successfully. b. After the camera is installed, move the quick-release baseplate to the right and make sure the camera’s right side is aligned with the tilt arm to achieve the best stability.
Balance Adjustment
1. Balancing the tilt axis vertical a. Rotate the camera so that the lens is pointing upward b. Unlock the tilt axis and loosen the knob, slightly adjust the position of the tilt adjustment slider. c. The balancing is completed when the camera is steady while pointing upward, lock the tilt axis.
2. Balancing the tilt axis horizontal a. Rotate the camera so that the lens is pointing forward; b. Unlock the quick release plate, slightly adjust the position of the plate; c. The balancing is completed when the camera is steady while pointing forward, lock the quick release plate.
4

3. Balancing the Roll Axis a. Unlock the Roll axis. b. Slightly adjust the roll arm left and right until it’s completely horizontal. c. Lock the roll axis.
4. Balancing the Pan Axis a. Hold the gimbal at an angle of 45° horizontally, turn the pan arm to a horizontal angle. b. Unlock the Pan axis and slightly adjust the pan arm left and right. c. The Pan axis is balanced when the camera is steady, lock the pan axis.

Operation

Power Button Long Press: Power on or off One Click: Switch the follow speed, 5 levels from slow to fast Double-clickEnter or exit sleep mode.

Joystick

Control the rotation of the gimbal

Menu:

Top Button: Option-up

Left Button: Return

Down Button: Option-down Right Button: Confirm

5

Camera Control Button Press halfway: Autofocus One clickStart recording Press and hold for 3 seconds: take a photo

Function Button: One Click: Follow mode (PanPan&TiltFPVAll Lock) Double Click: Sport Gear Mode Triple Click: Inception Mode Long Press: Enter/Exit Menu

Trigger Button One Click: Start/Stop AI Follow Mode Double Click: Re-center Triple Click: Selfie Mode Press and Hold: All Lock One Click and Hold: Sport Gear Mode

Advanced Features

Display

12 3

4

5

6

1. Camera Control Shutter USB(Disconnected) USB Connected)

2. Bluetooth Disconnected Connected

3. AI ModulecIcon will display after the device is connected. If the device isn’t

connected no icon will be displayed.

4. Battery Leve 5. Follow Mode

6. Follow Speed

The follow mode and follow speed will not display after choosing the specific function, instead only the current function will be displayed. (Ex. Inception Mode, Time-lapse.)
6

MENU

Camera Shutter Multi Multi/C Remote USB Power

Set the connection type of the camera Set the connection type to universal shutter cable (Cable needs to be purchased separately.)
Set the connection type to Sony-Multi port
Set the connection type to Sony-Multi port with USB power supply Set the connection type to Panasonic-Remote port (Cable needs to be purchased separately.) Set the connection type to universal USB port (Mini, micro, Type-C, etc)
Set motor power

Autotune Autotune set: the gimbal will set the appropriate motor power automatically

Manual

Manual set: each motor can be adjusted independently (levels 1-5)

Roll

Set roll motor power

Tilt

Set tilt motor power

Pan

Set pan motor power

Joystick

Set the control habit of the joystick

Sensitivity Adjust the sensitivity: the higher the sensitivity, the faster the rotation speed of the gimbal.

Reverse

Reverse: the gimbal rotates in the opposite direction to the joystick operation.

Advanced Advanced

Manual-Pos Manual-Positioning (manually turn the gimbal to the specified direction and hold it for 2 seconds)

Open

Open the manual positioning

Close

Close the manual positioning

UART1

External communication port (AI port)

Open

Open the external communication port

Close

Close the external communication port

Calibrate Calibrate the gimbal: automatically calibrate the sensor

Level

Level fine-tuning: forcibly adjust the camera’s horizontal angle within ±5°

System

System

Language

Set display language (Language selection will pop up automatically after the first boot or reset) Switch display language to simplified Chinese

English

Switch display language to English

Reset

Reset the gimbal: restore default parameter settings

About

Check Bluetooth name, hardware and firmware version

7

Auto Tuning
1. Unlock all the motors. Mount and balance the camera. 2. Attach the gimbal to a tripod. Place it on a level surface. Long press the power button to
power on the gimbal. 3. Enter the Menu, then select Power then Autotune. Move the joystick to the right to select
Autotune. 4. The motor will run automatically and gradually adjust the power of each motor. The gimbal will
return to normal working status once the adjustment is completed. b
Gimbal Calibration
1.Unlock all the motors. Mount and balance the camera. 2.Attach the gimbal to a tripod. Place it on a level surface. Long press the power button to
power on the gimbal. 3.Enter the Menu, then select Advanced then Calibrate. Move the joystick to the right to select
Calibrate. 4.The motor will automatically calibrate the sensor. Do not touch the gimbal during this process,
just wait for the calibration to complete. If the gimbal is placed on a tilt or shaky desktop then any shaking caused by touching the gimbal during this process will probably lead to failed calibration. You can try to calibrate again after making the necessary adjustments. Normally, calibration is only required if the gimbal is off tilt or drifting due to long-distance transportation, vibration, or intense temperature changes.
Level Fine-tuning
In some cases, the camera may not be fully horizontal due to installation and coordination differences between the camera and the gimbal. You will need to fine-tune the roll axis to make the camera completely horizontal.
1.Mount and balance the camera, unlock all the motors. 2.Attach the gimbal to a tripod. Place it on a level surface. Long press the power button to power on the gimbal. 3.Turn on the camera, and bring up the built-in digital level. 4.Enter the Menu, then select Advanced then Level. Move the joystick to the right to select Level to enter the fine-tuning interface. 5.Keep an eye on the digital level while moving the joystick up and down. Stop tuning when the digital level completely horizontal.
Reset And Restoration
If the gimbal can be powered on and off but is not operating smoothly, possibly due to abnormal parameters, you can enter the Menu and select About then select Reset to reset the parameters. The gimbal will automatically shut down after a reset, and it can be used normally after turning it on again. If the gimbal cannot be powered on or off normally, or cannot be started due to a firmware upgrade failure, you can use the ejection pin to press the internal restore hole to restore the parameters. Turn it on or try to upgrade the firmware again after restoration.
8

MOZA Master
Connection
1. Start MOZA Master and allow the permissions required by the App; 2. Choose the AirCross 3 in the device menu. 3. Click the “Connect” button behind the gimbal name; 4. Wait for the Bluetooth connection to complete.
9

Main Interface
æ Device Name ç Battery level (click to sleep/wake up the gimbal) è Camera Type (click to open up the camera list) é Remote Control (enter the remote control interface) ê Settings (enter to set parameters) ë Creative Videos (enter advanced functions such as
time-lapse) ì Inception (enter/exit Inception Mode) í Re-center (the gimbal returns to the starting position) î Disconnect Bluetooth Connection
Remote Control
æRecord/Stop (need to connect the camera control cable)
ç Photo (need to connect the camera control cable) è Selfie (after clicking, the gimbal pan axis will rotate
180°) é Virtual Joystick (control the tilt and pan rotation of the
gimbal) ê Remote Control Speed (Set the gimbal rotation speed
controlled by the virtual joystick.) ë Re-centering (the gimbal returns to the starting
position)
10

Gimbal Setting
æMotor setting, set the motor power, autotune, follow speed, follow modes, etc. ç Joystick definition , set the sensitivity and operating habits of the joystick. è Advanced setting, sensor calibration, level fine-tuning, firmware upgrade, etc. é About, check the firmware version and APP version.
Firmware Upgrade
After the MOZA Master app is connected to the gimbal, enter the Menu and select Gimbal Setting then Advanced Setting then Upgrade. If there is a new firmware update, clicking the Confirm button will start the upgrade process. The upgrade process takes time, please be patient. Once the upgrade is finished, the gimbal will automatically turn off and it can be used again after powering it back on. Do not turn off the gimbal, or turn off the mobile phones Bluetooth, or disconnect the mobile phones network or exit MOZA Master during the upgrade process. Doing any of these might lead to an upgrade failure.
11

Specifications
Model: AirCross 3 Weight: 1.3kg without tripod Dimension: Unfold: 170190310mm, (WDH) folded: 52225270mm Battery Type: Li-ion Intelligent Battery(built-in), 25.45Wh Battery Capacity: 3500mAh Standard Votage: 7.27V Charging Votage: 5V/2A, 9V/2A Working hours: 20H Fast-charging time: 1.4H Bluetooth: BT5.02.400 GHz -2.4835 GHz Environmental Working temperature: -10 ¥ -50 ¥; requirements: Charging temperature: 5 ¥-40 ¥
12

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>