BolaButty S311 Rock Stone Speaker User Guide

S311 Rock Stone Speaker
User Guide

Product Diagram

1. Solar Charging Panel
2. Indicator
3. Power button
4. Bluetooth Button
5. Wall Charger Input Jack

What’s In The Box

Spcifications

Using Your Speaker

1. CHARGING YOUR SPEAKER
   Plug in supplied 9V,2A adaptor to fully charge the product before use and then power on.
   When charging, the red LED is steady.
   When fully charged, the red LED turns off.

2. POWERING ON/OFF
   Press and hold on to the Power button to turn on. The blue LED will flash.
   The speaker is in pairing mode.
   Press and hold on Power to turn off.

3. CONNECTING A BLUETOOTH DEVICE
   Choose “Rock Stone in your Bluetooth settings menu. The Blue LED will be lit solid to confirm the connection.
   Adjust the volume using your Bluetooth device

4. DISCONNECTING BLUETOOTH CONNECTION
   Press and hold the BLUETOOTH Button, The Blue LED indicator will flash,
   To reconnect the Bluetooth-enabled device:
   When you turn on this speaker next time, it tries to reconnect the last connected device automatically.
   If not, manually select “Rock Stone” on your Bluetooth device to connect. If you want to connect to a new Bluetooth device, please disconnect the existing Bluetooth device.

5. PARING TWO BLUETOOTH SPEAKERS (TWS MODE)
   You can pair two speakers together to create left and right channels and enjoy stereo sound. >a. Turn on both speakers. Their light LED will flash. Indicating they are
   ready to pair.

   b. Short press the Bluetooth button of one speaker. Wait for seconds then you will hear a prompt tone. Indicating that the two speakers are paired successfully. Do not turn on your phone’s Bluetooth function before the pairing is successful.
   c. Turn on your device’s Bluetooth and tap “Rock Stone”, it will automatically connect one of the speakers. When the pairing is completed, you can enjoy wireless stereo sound from both speakers.

Note:

a. Before pairing two speakers together, please make sure that the two speakers are not connected to other devices via Bluetooth. If one of them is connected to another device. They will fail to pair with each other.
b. For a better listening experience. please put the speakers within 50 feet of each other. To achieve the best result place the speakers in an open area without barriers
SOLAR PANEL
To get the most out of your solar panel, place the speaker in a location that gets direct sunlight all day.
WATER-RESISTANCE
This speaker is water-resistant, but we encourage:
Taking the speaker indoors during heavy rains and snow Avoiding leaving the speaker in sitting water or puddles

SAFETY PRECAUTIONS

Please follow the instructions for all operations and use.

1. Do not charge near a water source or in the rain to prevent electric shock.
   2. Do not damage the cable, especially the connectors.
   3. Unplug the Charging adaptor when it is not in use or during a thunderstorm.
   4. Please keep the speaker away from heat sources (including all equipment that generates heat), such as stoves.
   5. Do not expose the speaker to extreme temperatures for a long time. Excessive heat or extreme cold temperatures may damage the battery.
   6. Do not attempt to disassemble the speaker.

FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

After-Sales Service Tel:
1(970)364-2868
After-Sales Email: support@bolabutty.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>