BolaButty L12 Upgraded Outdoor Speakers User Guide

BolaButty L12 Upgraded Outdoor Speakers

WHAT’S IN THE CARTON

Confirm that the following parts are included:

• TORCHLIGHT Bluetooth speaker x 2
• Wall-Mount x2
• Adjustable Stake x2
• SHook x2
• User Guide x l
• Multi-sync Card x l

USING YOUR SPEAKER

POWER ON/OFF
Press and hold the (power) button for 5 seconds.

Auto-off timer
The auto-off timer conserves the battery when the speaker is operating on battery power. The speaker switches off when audio has stopped and buttons have not been pressed for 15 minutes.

Hint
In the event such as following, press and hold the (power) button for about 10 seconds to restart the speaker.

• You can not operate the speaker after you turn it on.
• You can not operate the speaker after you troubleshoot paring issues.

BLUETOOTH CONNECTIONS

Connect using the Bluetooth menu on your mobile device

1. Press and hold button to power on the speaker.
2. Press button to pair.
3. On your device enable the Bluetooth feature. Select TORCH LIGHT from the device list.
   After successful pairing, the panel indicator states solid blue.

Hint
Upon connecting one speaker to your Bluetooth device, the other speakers will promptly enter Multi-Sync mode, eitherTWS or Party modes, as they power on. This will enable all speakers to play in sync.

Reconnect a mobile device
When powered on, you need to press the (Bluetooth) button first and the speaker tries to reconnect with the most recently-connected devices.

Listening to music wirelessly with 2 speakers (TWS)

1. Make sure both speakers are powered on.

2. Press the Bluetooth button on ONE of the two speakers.

3. Make sure one speaker is connected to your device.

4. Stereo mode is enabled, and you are now able to play audio in unison using your mobile device.

Note Performance may vary based on mobile device, distance and environmental factors.

For an optimal experience, position your speakers:

• In the same room or outdoor area
• So there are no obstructions between them.

Enjoying wireless playback using multiple speakers (Party Mode)
You can connect multiple speakers (up to 100 speakers) compatible with the Multi-Sync mode via BLUETOOTH connections and enjoy music playback.

1. Make sure one speaker is connected to your Bluetooth device.
2. On additional speakers, press and hold the power button for 5 seconds to turn them on.
3. Multi-sync mode is enabled, and you are now able to play audio in perfect sync using your mobile device.

NOTE

• When multiple speakers are successfully synchronized, only the blue light on the panel of the primary speaker will remain on, the indicator lights of other speakers will flash.
• To adjust volume or use other control buttons, please use either your mobile phone or the primary speaker. When you power off the primary speaker, all connected speakers will power off.

Switch the Primary Speaker

1. STEP 1
   On the desired speaker, briefly press the Bluetooth button to set that speaker as the Primary speaker.

2. STEP 2
   On your device Bluetooth Settings, tap another TORCH LIGHT.

3. STEP 3
   Wait a few seconds, then press the play button to resume audio playback, at which point the Primary speaker will have switched.

Turning on/off the Standby function
Enable Standby Mode to keep the sync settings so you don’t have to repeat the synchronization processes the next time.
The speakers will consume a small amount of power in Standby Mode .

1. Short press once the power button on the Primary speaker.When you hear “Standby”, the Standby function is turned on, the button indicators go off.
2. Another press on Power button, when you hear “Awake”, the Primary Speaker will automatically reconnect with the Secondary Speakers.

CONNECTING USING THE AUX JACK
Use an audio cable (commercially available) to connect a portable audio device, etc. to the speaker.

CHARGING YOUR SPEAKER
When charging, the LED indicators on the top of speaker will light up solid red. When fully charged, the LED indicators on the top of speaker will go out.

TECHNICAL PARAMETERS

MAINTENANCE & CARE

• Before using your speaker, inspect the ports to make sure that they are clear of dust and debris before charging.
• Use a soft cloth to clean your speaker. Never use any harsh chemicals or deter­ gents. Make sure your speaker is dry before charging.
• This speaker can stand up to splashes and spills. For the best performance, avoid exposing it to water or harsh weather conditions.
• The stakes should not be exposed to direct sunlight for lengthy periods of time as this may cause them to bend.
• Do not expose your speaker to high temperatures, or extreme cold.

ONE YEAR WARRANTY

1. Our products are covered by a 12-month limited warranty, starting from the date of purchase. This warranty is not transferable and applies only to the original consumer purchaser.
2. For quality-related issues, we will, at its sole option, repair or replace any products that malfunction due to defective parts or workmanship at no charge to you.

Not Covered Under Warranty

• Damage from outside sources
• Damage from misuse of products(including,but not limited to: falls, extreme temperatures, water, operating devices improperly, incorrect connections, incorrect battery use)
• Damage caused by accident, improper care, negligence, excessive wear and tear, or improper installation or assembly contrary to any written installation instruction
• Items that have expired their warranty period
• Non-quality-related issues(after 30 days of purchase)
• Repairs through 3rd parties
• Any questions, please feel free to contact us.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>