denver WCT8016 Digital Wildlife Camera Instruction Manual

denver WCT8016 Digital Wildlife Camera

Safety precautions

Please read the safety precautions carefully before using the product for the first time and keep the instructions for future reference.

1. This product is not a toy. Keep it out of reach of children.

2. Keep the product out of reach of children and pets to avoid chewing and swallowing.

3. Never use old and new batteries or different types of batteries together in main unit.
   Remove the batteries when you are not using the device for a longer period of time. Check the polarity (+/-) of the batteries when inserting them in the product. Wrong positioning can cause an explosion. Batteries are not included.

4. Product operating and storage temperature is from -20°C to +40°C. Higher and lower temperature might affect the function.

5. Never open the product. Touching electric parts may cause electric shock. Repairs or service should only be performed by qualified personnel.

6. Do not expose to heat or direct sunlight!

7. Do not use non-original accessories together with the product as this can make the product functionality abnormal.

Product Introduction

Some Tips before Using

• If you see a red flash when you take photos, push the switch from “TEST” to “ON”.
• After you push the switch from “TEST” to “ON”, you will see a 15s countdown, and then the screen will shut down. This is completely normal. You can walk in front of the camera to check if it takes photos and videos.
• Do not dip the camera into water.
• The camera can work at temperatures under -20°C, but please keep it far away from heat sources to protect the batteries.
• Alkaline batteries are recommended because they are able to provide strong and stable power to the camera.
• Please do not mix old batteries and new batteries.
• If a DC 6V power adapter is used to power the camera, please make sure there are no batteries in the camera to prevent overcharging.

Specifications

Menu Functions

Mode| Select the working mode you need| Photos (default) Videos Photos &

Videos

---|---|---
Photo
Resolution| Select a different
photo resolution| 50/36/24/20/16/1
2/8/5/3/1MP
Photo Series| You can set the photo quantity when the camera is

activated

| 1 photo (default) 2 photos in series 3 photos in series

10 photos in series

Video Resolution| *** Select a different video resolution| 38402160p
26881520p
19201080p
1280720p
848480p
720480p
640480p
Video length| You can choose the length of video| 3 seconds to 10 min
Audio Recording| Set if you want the camera to record sound| On (default) Off
Shot Lag| The time interval between each trigger(1)| 5 seconds (default) to 60 minutes max.
Side Motion Sensors| Turn the side motion sensors on/off| On/Off
Sensitivity Motion Sensors| You can adjust the sensitivity of the motion detection sensor.| Low Middle (default) High
Target Recording Time(2)| Set the camera to record at certain intervals| On (to set the interval) Off (default)
Time Lapse| Set up time lapse mode and the length of the lapse.| On/Off (default)
Language| Choose a different display language| English/German/ Danish/Finnish/ Swedish/Spanish/ French/Italian/ Dutch/Polish/ Portuguese/ Norwegian/ Croatian
Endless Capture| If Endless Capture mode is on, the camera will not stop recording when the memory card is full but will delete the oldest videos or photos to keep recording continuously| On Off (default)
Time & Date| To set time and date. You can also choose the time format (24h or 12h) and choose the date format (dd/mm/yyyy, yyyy/mm/dd or mm/dd/yyyy)| Set Time & Date Time Format Date Format
Photo Stamp| To choose if there will be time and date on the photo.| Time & Date (default) Date Off
Password Protection| Set up a password to secure your camera| On Off (default)
Format Memory Card| Choose with caution! You will lose all data on the memory card when formatting.| Yes No (default)
Serial No.| To set up the serial number of the camera (3)| On Off (default)
Reset Settings| Reset all the settings to the original settings| Yes No (default)

1. For example, we set the 1 minute video length and 30 seconds shot lag. When the camera detects an animal, it will start to record a 1-minute video. However, the camera will not detect continuously. When the video is done, the camera will not detect immediately. It will attempt detection again 30 seconds after the video has completed to conserve battery life.
2. To use the “Target Recording Time” function, make sure you have already turned on the “Time Lapse” function and set the length of the lapse.
3. If you use several cameras at the same time and you want to recognize which camera took which photos and videos, set up a serial number could help you. The serial number will show on the bottom right of the photos or videos.

Frequently Asked Questions

1. I can’t turn on my camera!

   • Check if the batteries have full power;
   • Check if the battery polarity is correct;
   • Please re-install the batteries.

2. My camera is not taking photos or recording videos!

   • Check if the microSD card is Class 10;
   • Check if the microSD card works normally on other devices;
   • Format the microSD card.

3. The camera does not detect anything!

   • Make sure that the camera is not behind glass;
   • Check the settings in the menu to adjust the detection distance and the detection sensitivity of the camera and then try again.

4. Why does the camera not record at night but works well during the day?

   • Please check the battery level of the camera. If the battery is low (< 1/3 of the full capacity), the night vision function will automatically shut down.
     Change the batteries to restore the night vision function.

5. My “Target Recording Time” function does not work!

   • Check if you have also turned on the “Time Lapse” function and set the lapse length.

Please notice – All products are subject to change without any notice. We take reservations for errors and omissions in the manual.

ALL RIGHTS RESERVED, COPYRIGHT DENVER A/S

Electric and electronic equipment contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment) is not handled correctly.

Electric and electronic equipment is marked with the crossed out trash can symbol, seen above. This symbol signifies that electric and electronic equipment should not be disposed of with other household waste, but should be disposed of separately.

All cities have established collection points, where electric and electronic equipment can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city.

CUSTOMER SUPPORT

Contact
DENVER A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denver.eu
DenverA/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
denver.eu
If your country is not listed above, please write an email to
support @denver.eu
Phone: +43 1 904 3085
E-Mail: denver@lurfservice.at

References

• Denver A/S

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>