FIELDMANN FZR 5316-170B Rotary Petrol Lawnmower User Manual
- August 30, 2024
- FIELDMANN
Table of Contents
FZR 5316-170B Rotary Petrol Lawnmower
“`html
Specifications:
- Model: FZR 5316-170B
- Type: Petrol Lawnmower
- Features: Rotary blade system, adjustable cutting height, grass
catcher
Product Description:
The FZR 5316-170B is a rotary petrol lawnmower designed for
efficient grass cutting. It comes with various parts including
drive lever, upper handle, grass catcher, and more for easy
operation.
Safety Instructions:
Before using the lawnmower, carefully read the user’s manual to
understand important safety notices. Always store the machine in a
dry place out of children’s reach. Follow all warnings and
instructions to prevent injuries.
Assembling Instructions:
Assembly of the Handle:
-
Fasten the lower handle using two bolts and knobs on each
side. -
Unfold the upper handle and fix it to the lower handle. Ensure
the rope guide is on the right handle. -
Secure the cord to the handle with a cable clamp.
Assembly of the Grass Catcher:
-
Clip the grass bag over the metal frame securely.
-
Lift the rear discharge cover and hook the grass catcher onto
it. -
Release the rear discharge cover and ensure the grass catcher
is secured.
FAQ:
1. Can I use the petrol lawnmower in enclosed areas?
Absolutely not. The emission of toxic gases makes it unsafe to
use the lawnmower in enclosed or unventilated spaces.
2. How often should I check the oil level in the
lawnmower?
It is recommended to check the oil level regularly, especially
before each use, to ensure proper lubrication of the engine.
“`
FZR 5316-170B
EN 2 English
………………………………………………………………………………………………………………………………………………………………………….. 3 – 18
Cestina…………………………………………………………………………………………………………………………………………………………………………19 – 34
Slovenstina………………………………………………………………………………………………………………………………………………………………….35 –
50 Magyarul……………………………………………………………………………………………………………………………………………………………………..51
– 66 Polski
………………………………………………………………………………………………………………………………………………………………………….67 – 82
FZR 5316-170B
Table of Contents 3 EN
Petrol Lawnmower
USER’S MANUAL
Thank you for purchasing this rotary petrol lawnmower. Before you start using
it, please, carefully read this user’s manual and save it for possible future
use.
TABLE OF CONTENTS
1. GENERAL SAFETY INSTRUCTIONS ………………………………………………………………………………………………………….4
Important safety information………………………………………………………………………………………………………………..4
Packaging ………………………………………………………………………………………………………………………………………………….4 User’s
Manual …………………………………………………………………………………………………………………………………………….4
2. EXPLANATION OF INSTRUCTION LABELS ON THE MACHINE…………………………………………………………5 3.
DESCRIPTION OF PRODUCT PARTS………………………………………………………………………………………………………7 4.
ASSEMBLING……………………………………………………………………………………………………………………………………………….7 5. BEFORE
STARTING THE LAWNMOWER …………………………………………………………………………………………….. 10
Adding oil ……………………………………………………………………………………………………………………………………………….. 10 Adding
fuel……………………………………………………………………………………………………………………………………………… 10 6. CONTROLLING
AND OPERATING THE LAWNMOWER………………………………………………………………… 11 Starting the lawnmower
……………………………………………………………………………………………………………………… 11 Application range for the
lawnmower………………………………………………………………………………………….. 11 Mowing with the grass catcher
……………………………………………………………………………………………………….. 11 Mowing with rear discharge
…………………………………………………………………………………………………………….. 11 Replacing the mowing blades
………………………………………………………………………………………………………… 12 Changing the motor oil
………………………………………………………………………………………………………………………. 12 7. SAFETY INSTRUCTIONS
………………………………………………………………………………………………………………………….. 13 General safety
instructions ………………………………………………………………………………………………………………… 13 Instructions for
use ………………………………………………………………………………………………………………………………… 13 8.
MAINTENANCE……………………………………………………………………………………………………………………………………….. 14 Lawn
care……………………………………………………………………………………………………………………………………………….. 14 Maintenance
…………………………………………………………………………………………………………………………………………. 14
Servicing…………………………………………………………………………………………………………………………………………………… 15 Warranty
does not cover……………………………………………………………………………………………………………………. 15 Storage
…………………………………………………………………………………………………………………………………………………….. 16 9. TECHNICAL
SPECIFICATIONS……………………………………………………………………………………………………………… 16 10. DECLARATION OF
CONFORMITY ……………………………………………………………………………………………………… 17 11.
DISPOSAL………………………………………………………………………………………………………………………………………………….. 18
PETROL LAWNMOWER
USER’S MANUAL
EN 4 General safety instructions
1. GENERAL SAFETY INSTRUCTIONS
IMPORTANT SAFETY NOTICE Carefully unpack the product and take care not to
throw away any part of the packaging before you find all the parts of the
product. Store the machine in a dry place out of reach of children. Read all
warnings and instructions. Not following warnings or instructions may lead to
injury by electrical shock, a fire and/or serious injuries.
PACKAGING The product is packed in a package that prevents damage during
transport. This package is a resource and so can be handed over for recycling.
USER’S MANUAL Before you start working with the machine, read the following
safety and usage instructions. Acquaint yourself with the operating elements
and the correct use of the machine. Keep the user’s manual in a safe place
where it can be easily retrieved for future use. Save the original packaging,
including the internal packing material, warranty card and proof of purchase
receipt at least for the duration of the warranty. If you need to ship this
machine, pack it in the original cardboard box to ensure maximum protection
during shipping or transport (e.g. when moving or when you need to send this
product for repair).
Note: If you hand over the machine to somebody else, do so together with the
user’s manual. Following the instructions in the included user’s manual is a
prerequisite for the proper use of the machine. The user’s manual also
contains operating, maintenance and repair instructions. The manufacturer
takes no responsibility for accidents or damages resulting from not following
the instructions in this manual.
FZR 5316-170B
Explanation of instruction labels on the machine 5 EN
2. EXPLANATION OF INSTRUCTION LABELS ON THE MACHINE
Before putting into operation, please carefully read the user’s manual.
Keep other persons away from the work area.
Attention, rotating blades! Protect yourself against the danger of injury to
limbs.
Emission of toxic gasses. Do not use the petrol lawnmower in enclosed or
unventilated areas.
Hot surfaces, risk of burns!
Before carrying out maintenance, turn off the engine and disconnect the spark
plug.
Never add fuel while the engine is running.
PETROL LAWNMOWER
USER’S MANUAL
EN 6 Explanation of instruction labels on the machine
Indicates that there is a risk of injury to persons, death or damage to the
machine if instructions are not followed Use hearing protection. Use eye
protection. Use breathing organ protection. Always maintain a distance from
moving parts. Travel along the slope on contours, not up and down. Conforms to
all relevant European directives. Petrol is extremely flammable and therefore
allow the engine to cool down for 2 minutes before adding more fuel.
FZR 5316-170B
Description of the lawnmower | Assembling 7 EN
3. DESCRIPTION OF PRODUCT PARTS (Fig. 1)
As shown in Fig. 1
Fig. 1
1. Drive lever (clutch lever) 2. Upper handle 3. Brake lever/Stop lever 4. Fixing system 5. Lower handle 6. Grass catcher 7. Height adjusting lever 8. Rear wheel 9. Front wheel 10. Side discharge chute 11. Blade enclosure 12. Oil dipstick 13. Fuel tank cap 14. Primer 15. Spark plug cap 16. Starter grip
4. ASSEMBLING
ASSEMBLY THE HANDLE 1. Fasten the lower handle by using two bolts and two
small Knobs on
each side.
PETROL LAWNMOWER
USER’S MANUAL
EN 8 Assembling 2. Unfold the upper handle and fix it to lower handle. Note:
Make sure the rope guide is on the right handle, when you stand behind the
mower.
3. Fasten the cord to handle with a cable clamp.
ASSEMBLY THE GRASS CATCHER 1. Clip the grass bag over the metal frame. Make
sure to be secured.
2. Lift the rear discharge cover and hook the grass catcher. 3. Release the
rear discharge cover and secure the grass catcher in
position.
FZR 5316-170B
ASSEMBLY THE MULCHING KIT
1. Remove the grass bag 2. Insert mulch kit into the opening. 3. Close the
flap.
Assembling 9 EN
ASSEMBLY THE SIDE DISCHARGE CHUTE
1. Lift the side discharge cover and fasten the side discharge chute. 2.
Close the side discharge cover.
Throttle switch cable description(Optional) 1. Lower push rod 2. Locking knob
3. Clamp 4. Accelerator switch assy 5. Hexagon bolt 6. Flameout lever 7.
Upward push rod 8. Handle rubber sleeve 9. Drive rod 10. Drawstring hook 11.
Hexagon nut 12. Hexagon cap nut 13. Irregular bolt 14. Cup head square neck
bolts 15. Drive flameout double cable
PETROL LAWNMOWER
USER’S MANUAL
EN 10 Before starting the lawnmower
5. BEFORE STARTING THE LAWNMOWER
ADDING OIL
The lawnmower is supplied without motor oil. Before first start up, add motor
oil SAE30 or 15W-40 (approx 600 ml) according to the following instructions.
1. When pouring in the oil, place the lawnmower on a level surface.
1
2
Fig. 4
2. Pull the cap with the oil dipstick out of the oil refill hole
(Fig.4 point 1).
3. After adding oil, put the dipstick back into the hole and
tighten it.
4. The oil level must be between the upper (MAX)
and lower (MIN) limit (Fig.4 point 1).
Caution! DO NOT OVERFILL the oil tank, otherwise a large amount of smoke will
come out of the exhaust when the lawnmower is started up. IMPORTANT
INFORMATION: Check the oil level before every use of the lawnmower. Add oil if
necessary. Add oil up to the MAX level mark on the oil dipstick.
IMPORTANT INFORMATION: Replace the oil after the first 5 hours of operation
and subsequently after every 25 hours of operation.
ADDING FUEL
The suitable type of fuel for this engine is NATURAL 95 After unscrewing the
fuel tank cap (Fig 4 point 2), add the fuel, pouring it in all the way up to
the collar of the fuel tank but do not overfill it. Always add fresh, clean
and approved lead-free petrol with an octane rating of at least 95.
Caution! In the event that you spill any oil or fuel on the lawnmower when
refilling, wipe it away immediately. Do not store or add fuel or handle it in
any way in the vicinity of an open fire.
Caution! Fuels mixed with alcohol or fuels with ethanol or methane additives
may bind moisture to themselves, which may result in separation during storage
and the formation of acids. Subsequently during storage the acid vapours may
damage the fuel system of the lawnmower engine. These fuels must not be used
in the lawnmower.
IMPORTANT INFORMATION: When not using the lawnmower for longer than 30 days, drain the fuel tank, start the engine and let it run until the fuel lines and the carburettor are empty (the engine will stop on its own). This will prevent future engine problems. Before using it again, add fresh fuel into the fuel tank. For more information, see chapter Storage instructions.
FZR 5316-170B
Controlling and operating the lawnmower 11 EN
6. CONTROLLING AND OPERATING THE LAWNMOWER
STARTING THE LAWNMOWER 1. If the engine is not warmed up, press the fuel
primer bulb 2-3 times (Fig. 5 point 1).
If the engine is already warm, it is not necessary to use the fuel primer
bulb. 2. Pull the start/brake lever towards the handle and hold it there (Fig.
5 point 2), then pull on the pull cord
(Fig. 5 point 3). The engine should start up after 3-4 pulls. 3. The engine
is turned off by releasing the start/brake lever.
Fig. 5
Caution! A small amount of smoke may be emitted when the engine is started up
for the first time as the protective layers in the engine are burnt off. This
is completely normal and does not constitute a problem.
APPLICATION RANGE FOR THE PETROL LAWNMOWER Mowing with collection of grass
clippings in a grass catcher Mowing with rear discharge of grass clippings
MOWING WITH THE GRASS CATCHER When the grass catcher is installed, grass
clippings are discharged into the grass catcher MOWING WITH REAR DISCHARGE
Without the grass catcher installed, the grass catcher cover serves as a
deflector that directs the movement of the grass clippings towards the ground.
A row of grass clippings is thereby formed behind the lawnmower
PETROL LAWNMOWER
USER’S MANUAL
EN 12 Controlling and operating the lawnmower
REPLACING THE MOWING BLADES Caution! For this task, we recommend that you
contact an authorised service centre. Caution! Prior to removing the blade,
drain the oil from the oil tank.
If you wish to replace the mowing blade, remove the bolt (Fig. 6). Perform the
installation according to the provided picture. Tighten the screw. The
tightening torque is 40 Nm. When replacing the the blade, replace the
fastening bolt also.
Fig. 6
CHANGING THE MOTOR OIL
Caution! For this task, we recommend that you contact an authorised service centre.
The drain plug is located under the engine
(Fig. 7 point 1). Place a suitable container for catching the used oil under the engine and remove the
Fig. 7
plug. Tilt the lawnmower so that all the oil can drain
from the oil tank.
Start up the lawnmower engine for a short while to
warm up the oil. Then extract the oil with the FZR 9050
oil extractor. Add type SAE30 or 15W-40 oil into the oil
tank. When the oil dipstick is inserted into the hole and
screwed in, the oil level should be between the Min and
Max marks (Fig. 7). Do not overfill the oil tank. Start
the engine and allow it to run for a short time. Stop the
engine, wait 1 minute and remeasure the oil level in the
tank. Add oil to the required level if necessary.
FZR 5316-170B
Safety Instructions 13 EN
7. SAFETY INSTRUCTIONS
GENERAL SAFETY INSTRUCTIONS
This product is used exclusively for mowing grass. Do not use it for any other
purposes than those intended. Otherwise there is a risk of damaging it or an
injury. Never allow children or persons who are not acquainted with the
contents of this user’s manual to work with the machine. The person operating
the lawnmower is responsible for the safety of persons in the work area. Never
operate the lawnmower in the near vicinity of other people, children or freely
roaming animals. Before starting mowing, check the terrain where the lawnmower
will be used and remove stones, wires, sticks, splinters, bones and other
foreign objects, which could become caught in it or deflected or cause
injuries.
INSTRUCTIONS FOR USE
All nuts, pins and bolts must be properly tightened so that the machine is in
a safe and operational condition. Never use the lawnmower without the grass
catcher or protective cover. Never use the lawnmower with loose mowing blades.
Always check in advance that all respective bolts are securely tightened.
Blunt blades must be sharpened evenly. Damaged blades must be replaced. When
working with the lawnmower, wear long pants and solid footwear. Never start
the lawnmower in enclosed or poorly ventilated areas where fumes could
accumulate. Emissions from the engine contain carbon monoxide, which is life
threatening. Work only during sufficient light conditions (in daylight or
sufficient artificial lighting). Do not use the lawnmower when it is raining
or if the grass is wet. Proceed especially carefully when mowing in elevated
terrain (on a slope). Always mow perpendicular to the slope, parallel to the
contour, and not directly up/down. Under no condition leave the lawnmower
running without supervision; if you leave the lawnmower, turn off the engine.
Never lift the rear part of the lawnmower when starting it and always keep
your limbs away from the cutting deck or the rear grass ejection chute while
the engine is running. Never modify the engine’s speed setting. On lawnmowers
with travel, release the travel lever before starting the engine. Never
transport the lawnmower while its engine is running. Stop the engine and
disconnect the spark plug in the following cases: – when performing any task
whatsoever under the mowing deck or in the rear grass ejection chute. – when
performing maintenance, repairs or inspecting the machine. – before carrying,
lifting or transporting the lawnmower. – when you leave the lawnmower without
supervision or you are getting ready to adjust the mowing height. – before
removing and emptying the grass catcher. – when an impact with a foreign
object occurs, stop the engine and carefully inspect to ensure that there is
no damage. In the event of damage, take the lawnmower to a specialised service
centre for repairs.
ATTENTION: The mowing blade continues to rotate for several seconds after the
engine is turned off.
PETROL LAWNMOWER
USER’S MANUAL
EN 14 Safety instructions | Maintenance
– if the lawnmower is vibrating abnormally (immediately identify and remedy
the cause of the vibration). – For the purpose of ensuring safe operation,
regularly check that the pins, bolts and nuts on the
lawnmower are securely tightened.
ATTENTION: FUEL IS A VERY FLAMMABLE LIQUID.
Store fuel in a suitable container. Only add fuel in an open and well
ventilated location. When handling fuel, do not smoke or use a mobile phone.
Only add fuel when the engine is turned off. Never open the fuel tank or add
fuel if the engine is hot or if it is running. If fuel is spilled, do not
start the engine. Take the lawnmower away from the location where the fuel was
spilled and take care to avoid possible ignition. Continue with work only
after the spilled fuel has evaporated and the fuel fumes have dissipated;
After adding fuel, securely tighten the fuel tank cap and the cap on the fuel
canister.
ATTENTION: Before carrying out maintenance or repairs, stop the engine and
disconnect the spark plug.
8. MAINTENANCE
LAWN CARE Various forms of care are required depending on the type of grass
area. Therefore, always read the instructions included on seed packages with
respect to the mowing height for the growing conditions in the given locality.
It is necessary to always keep in mind that the larger part of grass consists
of a stem and one or more leaves. When the leaves are cut off completely, the
lawn is damaged and the renewal of growth will be much more
difficult. The following instructions generally apply: excessively low
mowing causes disruption to the roots and subsequently “spotty” appearance;
in summer, mowing must be higher to prevent the soil from drying out; mowing
wet grass may result in a lower efficiency of the blade due to grass catching
on the blade and grass being ripped out of the ground; in the event of
exceptionally tall grass it is appropriate to perform the first mow at the
maximum permitted mowing height of the machine and then mow again only after
two or three days. The lawn will have a better appearance when it is mowed
regularly over its entire area at the same height with alternating mowing
directions.
MAINTENANCE All nuts, pins and bolts must be properly tightened so that the
machine is in a safe and operational condition. Regular maintenance is the
basic prerequisite for ensuring safety of the user, maintain the lawnmower’s
operating condition and high performance. Never store a machine with petrol in
the fuel tank inside a building where the fumes could come within range of an
open fire, sparks or sources of high temperature Before storing in any
enclosed area, allow the engine to cool down.
FZR 5316-170B
Maintenance 15 EN
To reduce the risk of a fire, ensure that the lawnmower and in particular the
engine, exhaust muffler, battery and also the location of spare fuel storage
are free of grass, leaves or excessive amounts of lubricant. Regularly inspect
the condition of the deflector and the grass catcher; replace if damaged.
Drain the fuel in a well ventilated area when the engine has cooled down. When
removing or installing the mowing blade, use thick work gloves. It is
necessary to check the balance of the mowing blade every time that it is
sharpened.
ATTENTION: Before carrying out maintenance or repairs, stop the engine and
disconnect the spark plug.
Regularly inspect the lawnmower and ensure that all grass deposits are removed
from the underside of the chassis. Regularly lubricate the axle of the chassis
and the bearings using a suitable lubricant. Regularly inspect the condition
of the blades because they have a significant effect on the performance of the
lawnmower. Blades should always be sharp and balanced. In regular intervals,
check that all nuts and bolts are tightened. Nuts and bolts that are worn out
or incorrectly tightened may cause serious damage to the engine or the frame.
If the blade strongly impacts an obstacle, stop the lawnmower and take it to
an authorised service centre. BLADE: the blade is made from pressed steel. To
achieve the best possible mowing results, regularly sharpen the blades,
approximately after every 25 hours of operation. Check that the blade is
always correctly balanced. To do this, insert a steel axle (with a diameter of
2-3 mm) into the middle hole. If it is correctly levelled, the axis will
remain in the horizontal position. If the blade does not remain in the
horizontal position, replace it. When removing the blade, screw out the bolt,
check the load bearing part of the blade. If the parts are worn out or
damaged, replace them.
ATTENTION: Always use only original spare parts. Poor quality spare parts may
cause serious damage to the lawnmower and create a safety hazard.
SERVICE
In the event that after purchasing the product you find any kind of defect,
contact the service department. When using the product, follow the
instructions contained in the included user’s manual. A complaint will not be
accepted if you modified the product or if you did not follow the instructions
in the user’s manual.
WARRANTY DOES NOT COVER
Normal wear and tear of operating parts of the machine as a result of its use
Servicing tasks related to standard maintenance of the machine (e.g. cleaning,
lubrication, tuning, etc.). Defects caused by external effects (e.g. climatic
conditions, dustiness, inappropriate use, etc.) Mechanical damage resulting
from the machine being dropped, impact, etc. Damages resulting from
unprofessional handling, overloading, use of incorrect parts, inappropriate
tools, etc. On returned products that were not properly protected against
mechanical damage during transport, the risk of potential damage is borne
exclusively by the owner.
STORAGE
If you will not be using the machine for an extended period of time, store it
according to the following
PETROL LAWNMOWER
USER’S MANUAL
EN 16 Maintenance | Technical specifications
instructions. This will extend the lifetime of the machine. Fully drain fuel from the fuel tank and the carburettor. Screw out the spark plug and pour a small amount of motor oil into the socket. Gently pull the pull cord 2 to 3 times. Use a clean cloth to clean the exterior surfaces. Store the machine in a clean dry location.
9. TECHNICAL SPECIFICATIONS
Type Cutting width (mm) Engine Motion Type Capacity of the grass bag speed of the blade (r/min) Net weight(Kg) Sound pressure level at operator position Lpa Measurement uncertainty KPa Sound power level LWA Measurement uncertainty Kwa Measured vibration value Measurement uncertainty K Blade Type Recommended tyres (diameter, inch)
FZR 5316-170B 530 RV170-SM Self-propelled 60 L 2800 28.5 85.2 dB(A) 3 dB(A) 95.6 dB(A) 2.14 dB(A) 5.0m/s2 2.5m/s2 73101-Z06 Front:8 Rear:10
Amendments to text and technical parameters are reserved.
Changes in the text, design and technical specifications may be made without
prior notice and we reserve the right to make such changes.
FZR 5316-170B
Declaration of Conformity 17 EN
10. DECLARATION OF CONFORMITY
EU DECLARATION OF CONFORMITY
Product / brand: Type / model:
Gasoline Powered Lawn Mower / FIELDMANN
FZR 5316-170B as factory model RMS53Q-V170 Engine 170,1cm3; 3,0kW; speed 2800
rpm; cutting width 530 mm LpA = 75,2 dB(A); LwA = 97 dB(A)
Manufacturer:
FAST CR, a.s. U Sanitasu 1621, 251 01 ícany, Czech Republic VAT no: CZ24777749
This declaration of conformity is issued under the sole responsibility of the manufacturer. Person in charge of completing the technical documentation: FAST CR, a.s.
The object of the declaration described above is in conformity with the relevant Union
harmonization legislation:
Directive MD 2006/42/EC
Directive EMC 2014/30/EU
Directive NEOE 2000/14/EC
Directive RoHS 2011/65/EU+(EU)2015/863
Directive Emission of gaseous 2016/1628/EU
The relevant harmonized standards and the other technical specifications:
EN ISO 5395-1:2013+A1
EN ISO 14982:2009
EN ISO 5395-2:2013+A2
EN ISO 12100:2010
Place of issuance: Prague Date of issuance: 22. 08. 2023
Name: Petr Uher – Responsible Person Signature:
PETROL LAWNMOWER
USER’S MANUAL
EN 18 Disposal
11. DISPOSAL
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING
MATERIALS Dispose of used packaging material at a site designated for waste in
your municipality.
The machine and its accessories are manufactured from various materials, e.g.
metal and plastic. Take damaged parts to a recycling centre. Inquire at the
relevant government department. This product meets all the basic requirements
of EU directives that apply to it. Changes in the text, design and technical
specifications may be made without prior notice and we reserve the right to
make these changes. User s manual in the original language.
FZR 5316-170B
Notes 19 EN
PETROL LAWNMOWER
USER’S MANUAL
EN 20 Notes
FZR 5316-170B
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>