attenti Tracker 200 and Bracelet 100 Electronic Monitoring Innovation User Guide
- June 15, 2024
- attenti
Table of Contents
Tracker 200 and Bracelet 100 Electronic Monitoring Innovation
Specifications
- Product Name: Tracker 200 and Bracelet 100
- User Guide: December 2022, Version 1.0
- Author: Steve Graniewitz
- Contact Info: Corporate Headquarters, Attenti Electronic Monitoring, 2 Ha-Barzel St., P.O. Box 13236, 61132 Tel Aviv, Israel.
- T: +972-3-7671800 //
- F: +972-3-7671801 //
- U.S.A Customers,
- call 1-800-313-1483
- Website: attentigroup.com
Safety Information
Please read, understand, and follow all safety information contained in
these instructions prior to the use of this Attenti Electronic Monitoring
device. Retain these instructions for future reference.
Intended Use
This Attenti Electronic Monitoring device is part of an electronic
monitoring system, which performs data transfer using cellular network to a
monitoring platform. This device has not been tested for and is not intended
for use on airplanes, in hazardous environments, in healthcare facilities, or
where cellular phones or other intentional transmitters are restricted.
Explanation of Signal Word Consequences
- WARNING: Indicates a hazardous situation which, if not avoided, could result in serious injury or death.
- CAUTION NOTICE: Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury and/or property damage.
- NOTICE: Indicates a situation which, if not avoided, could result in property damage.
Safety Information for:
- Rechargeable hand-held/wearable devices,
- Non-rechargeable hand-held/wearable devices,
- Cradles/receivers/base units
WARNING: To reduce the risks associated with hazardous voltage:
Avoid placing a device next to an implanted electronic device (e.g., don’t
carry the device in a shirt or jacket pocket directly near an implanted
device).
- Do not modify, decorate, or attempt to service the device.
- Return to Attenti authorized personnel or location for repair or service. There are no user-serviceable parts.
- If the device or power cord becomes damaged, contact the agency representative from which you are monitored.
- Do not force the power plug into an outlet where it does not fit.
- Use only an Attenti-provided AC/DC power adapter to recharge or power the device.
- Use only a safety-certified LPS AC/DC plug-in adapter with an output rating of 5 VDC, 2A.
- Do not unplug the AC/DC adapter by the power cord. Handle the adapter by the body only.
- Do not attempt to charge the device using an outdoor outlet. Only use the AC/DC adapter indoors.
- Do not expose the power adapter to rain, steam, or wet conditions.
- Do not submerge the device, or hold the device under running water, while it is charging.
NOTICE: Only authorized personnel can turn off or remove the device.
- Do not intentionally open or damage the device.
- Ensure the storage temperature of the device is within the range as specified in the device manual.
- Do not attempt to access or replace the battery. The battery is not user-replaceable. The device shall be opened by Attenti authorized service only.
- Do not use the device outside of the specified operation temperature range.
CAUTION
To reduce the risks associated with hot surfaces:
- Do not touch the thermal pads on the device or charger if charging is interrupted.
- Do not charge the device in temperatures above 45°C.
Safety information only for:
- Rechargeable Hand-held/wearable Devices
- Non-rechargeable Hand-held/wearable Devices
WARNING
To reduce the risks associated with fire or explosion:
- Do not enter areas with potentially explosive atmospheres. Potentially explosive areas are often, but not always, clearly marked.
Safety Information for Rechargeable hand-held/wearable devices, Cradles/receivers/base units
- WARNING: To reduce the risks associated with fire or explosion:
- Do not modify, decorate, or attempt to service the device. Return to Attenti authorized personnel or location for repair or service. There are no user-serviceable parts.
- If the device or power cord becomes damaged, contact the agency representative from which you are monitored.
Safety Information for Cradles/receivers/base units
- WARNING: To reduce the risks associated with hazardous voltage:
- Do not submerge the device or hold the device under running water.
CAUTION
- Avoid installing the electronic monitoring device in the presence of ulcers, open wounds, blisters, swelling or skin infection over the expected area of contact with the electronic monitoring device.
- If the user reports pain, numbness or other symptom over the expected area of contact with the electronic monitoring device, a medical opinion is recommended prior to installation.
- If the user reports concerns about an underlying medical condition that could be exacerbated by use of the electronic monitoring device, a medical opinion is recommended prior to installation of device.
- If, during use, the user experiences skin changes or symptoms in the area in contact with the electronic monitoring device, the user should immediately contact their agency representative.
Cancer Patients that have been treated with Radiotherapy:
- Avoid installing the electronic monitoring device in the presence of radiation-induced skin changes (such as ulcers, open wounds, blisters, desquamation, erythema, hyperpigmentation) over the expected area of contact with the electronic monitoring device. Otherwise, there is no currently available evidence the use of the electronic monitoring device is contraindicated in cancer patients that have been treated with Radiotherapy.
Pregnant women:
- Avoid installing the electronic monitoring device in the presence of ulcers, open wounds, blisters, swelling or skin infection over the expected area of contact with the electronic monitoring device. Otherwise, there is no currently available evidence the use of the electronic monitoring device is contraindicated in pregnant women.
Safety information only for:
- Cradles/receivers/base units
WARNING
To reduce the risks associated with hazardous voltage:
- Do not submerge the device or hold the device under running water.
WEEE
This symbol according to the European Directive indicates that the Waste of
Electrical and Electronic Equipment (WEEE) must not be disposed of as unsorted
municipal waste and must be collected separately. Please contact an authorized
representative of the manufacturer or an authorized waste management company
for information concerning the decommissioning of your equipment.
FCC
- Tracker 200 FCC ID: NC3TRACKER-200
- Bracelet 100 FCC ID: NC3BRACELET-100 FEDERAL COMMUNICATIONS COMMISSION (FCC)
FEDERAL COMMUNICATIONS COMMISSION (FCC) Part 15 STATEMENT
The equipment complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This device complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the ISED radio frequency (RF) Exposure rules. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna, 2. Increase the separation between the equipment and the receiver, 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected, 4. Consult the dealer or an experienced radio/TV technician for help.
- Attenti Electronic Monitoring has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user’s authority to operate the equipment.
Introduction
The attentifusionTracker 200 is a portable device designed specifically to
monitor offenders participating in GNSS tracking programs. The system
integrates tracking, communication, and mapping technologies that enable
operators to efficiently track offendersat varying levels of intensity. Each
monitored offender is assigned a tracking unit that continuously gathers
location data in real-time. The Tracker 200 stores and processes the location
data and communicates with the monitoring center to report the whereabouts of
the offender or alert in the event of a violation. Alerts are configured
according to the offender’s individual schedule and zone restrictions
.
The offender is assigned a Bracelet 100 device that is physically attached to their body. The Bracelet 100 sends periodic signals that enable the Tracker 200 to determine that the offender is in close proximity
Operating the Tracker 200
Several basic functions are designed for your use when participating in monitoring programs. The Tracker 200 includes an LCD and a five-button keypad for navigating the device’s menu-driven interface.
To navigate the Tracker 200’s interface:
- Press and to scroll through menu options.
- Press to select the highlighted option.
- Press to navigate back to the previous menu.
- Press to return to the Menu screen.
Charging the Unit
You should charge Tracker 200 for at least two hours per day using the power
adaptor supplied.
Violation Icons
When violation events occur, violation icons are displayed at the top of the screen on a red background until the condition has been resolved.
The following violation icons are displayed:
-
Inclusion Zone Violation
This icon is displayed when you are not in the inclusion zone when required to be present. After notification is received, you should return to the inclusion zone immediately. -
Exclusion Zone Violation
This icon is displayed when you enter an exclusion zone. After notification is received, you should move away from the restricted area until the icon disappears. -
Low Battery Violation
You are required to charge the device regularly. If the device’s battery depletes to the level defined as “Low Battery”, connect the device to its charger as soon as possible.
Acknowledging Received Messages
To acknowledge a message:
- Press .
The message is cleared from the display.
Phone Calls
The Tracker 200 can operate like a cellular phone allowing you to make and
receive phone calls.
Outgoing Calls
The Tracker 200 enables you to make calls to a list of pre-defined phone
numbers.
To make a call:
- On the Menu screen, scroll to Contacts and press . The Contacts screen is displayed.
- On the Contacts screen, scroll to the contact you want to call and press .
- At the end of the call press to disconnect.
Incoming Calls
The Tracker 200 can receive incoming calls. When there is an incoming call,
the Tracker 200 rings and displays a message.
To answer an incoming call:
- When the Tracker 200 rings, press .
- At the end of the call press to disconnect.
General Rules for the Offender
The following are general tracker 200 monitoring program rules for the offender:
- Always keep the tracking unit with you.
- Whenever the tracking unit vibrates, beeps, or sounds tones, you must read the message displayed in the display screen.
- Whenever you receive a message and are instructed to perform a task, you must comply.
- Whenever you receive a message, you must acknowledge the message.
- Never attempt to open the tracking unit.
- Never attempt to open the bracelet strap clip.
- Never attempt to cut or break the bracelet strap.
- Never leave the designated curfew site during the curfew time frame.
- Never attempt to tamper with the tracking unit. Tamper attempts will be reported to the monitoring center and will be considered a violation of your program.
Product Usage Instructions
Tracker 200
The Tracker 200 is a device used for electronic monitoring.
Follow the steps below to use the Tracker 200:
- Attach the Tracker 200 securely to the person or object you want to monitor.
- Ensure that the Tracker 200 is charged and powered on.
- The Tracker 200 will automatically connect to a cellular network for data transfer.
- Monitor the data and location information on the designated monitoring platform.
Bracelet 100
The Bracelet 100 is a wearable device used for electronic monitoring.
Follow the steps below to use the Bracelet 100:
- Wear the Bracelet 100 securely on your wrist.
- Ensure that the Bracelet 100 is charged and powered on.
- The Bracelet 100 will automatically connect to a cellular network for data transfer.
- Monitor the data and location information on the designated monitoring platform.
FAQ
Q: Can I use the Tracker 200 or Bracelet 100 on an airplane?
A: No, these devices have not been tested for and are not intended for use on
airplanes.
Q: Can I use the Tracker 200 or Bracelet 100 in hazardous environments?
A: No, these devices are not intended for use in hazardous environments.
Q: Can I use the Tracker 200 or Bracelet 100 in healthcare facilities?
A: No, these devices are not intended for use in healthcare facilities.
Q: Can I use the Tracker 200 or Bracelet 100 where cellular phones or other
intentional transmitters are restricted?
A: No, these devices are not intended for use where cellular phones or other
intentional transmitters are restricted.
Q: What should I do if the device or power cord becomes damaged?
A: Contact the agency representative from which you are monitored for repair
or service.
Q: Can I turn off or remove the device myself?
A: No, only authorized personnel can turn off or remove the device.
Q: Can I enter areas with potentially explosive atmospheres while wearing
the device?
A: No, do not enter areas with potentially explosive atmospheres.
Q: Can I submerge the device or hold it under running water?
A: No, do not submerge the device or hold it under running water.
Contact Info:
Corporate Headquarters:
Attenti Electronic Monitoring,2 Ha-Barzel St.,
P.O. Box 13236, 61132 Tel Aviv, Israel.
T: +972-3-7671800 //
F: +972-3-7671801 //
U.S.A Customers, call
1-800-313-1483
Visit us at: attentigroup.com
References
- Electronic Monitoring by Attenti Group | United States
- Electronic Monitoring by Attenti Group | United States
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>