REJDESIGN Hot Water Heated Towel Dryer Instruction Manual
- August 30, 2024
- REJDESIGN
Table of Contents
Installation and maintenance instructions: hot water heated towel dryer
HOT WATER HEATED TOWEL DRYER
2 X
∅ 6 mm
2 X
4 X 4 X
1 X
FINNISH REJ DESIGN TOWEL DRYERS
General instructions
A towel dryer is exposed to constant wear and therefore requires maintenance. Regular maintenance guarantees faultless operation of the dryer and significantly prolongs its service life. This servicing must be performed with suitable tools. For the water-filled dryer to operate correctly, the pipes must be clean from mechanical debris before the product is installed.
Special attention should be paid to use of the correct installation method, so that the towel dryer functions appropriately.
Installation must be performed by an authorised installer or installation company. The installation must be completed with appropriate mounting accessories and equipment suited to the installation site, and it must apply the requirements of the local/national building code, professional skill, and meticulousness
Rej Design water-filled towel dryers are dimensioned for Oras couplings or similar, and Rej-Design Oy recommends the use of Oras surface-mounted eccentric or direct couplings for installation of the water-filled dryers. When one uses surface-mounted installation-angle couplings, it is important to install the coupling correctly, so that the coupling includes a packing sleeve on the sealing surface (otherwise, sharp edges could damage the dryer seal over time). Water couplings are not included in the delivery of the dryer package.
All electrically operated towel dryers are delivered with a preinstalled cable for cable coupling. Fixed installation (with the connection cable not remaining visible) of an electrically operated towel dryer is to be performed only by an authorised electrical installation company. For fixed installations, Rej-Design Oy recommends the use of the dryer’s own connection cable.
Use this space to write down the product information:
Place and date of purchase: ____
Dryer model: ___
Production number (can be found in the hologram sticker attached to the
dryer): __
Care instructions for the outer surfaces of the towel dryer
The outer surfaces of the towel dryer should be regularly cleaned with water and a neutral or mildly alkaline (pH 6-9) fluid detergent (e.g., soap solutions and most washing-up liquids) in accordance with the detergent manufacturer’s instructions. Dirt, lime, and other build-up is usually easiest to remove with soap and water.
An electrically operated towel dryer must be switched off before cleaning.
Clean the towel dryer with a sponge or soft kitchen cloth moistened in soap solution. Rinse several times, using a sponge or cloth moistened in clean, tepid water, and then dry the surfaces.
Do not use any abrasive or corrosive agents or cleaning tools, solvents, acids, or ammonia-containing substances on chrome-plated and painted surfaces. Chrome-plated surfaces cannot withstand phosphoric acid and chlorine compounds or resist their effects only poorly.
If a chrome-plated towel dryer darkens here and there through use, the dark surfaces can be cleaned with, for example, fluid silver-cleaning agents. Note: After cleaning, always rinse the surfaces thoroughly, using a sponge dampened in water, and then wipe dry. After cleaning, the towel dryer can also be treated with chrome wax in accordance with the waxing instructions (chrome wax is available at shops selling car supplies). A waxed surface resists water and dirt, at the same time making it easier to keep the dryer clean.
Warranty
The Rej Design towel dryer has a five-year warranty from the day of purchase. The warranty covers material and production defects.
The warranty does not cover defects and damage caused through incorrect installation, use, or repair of the product. The warranty does not cover maintenance procedures necessitated by impurities in the water (residues etc.).
Notification of any defect must occur within reasonable time (usually 14 days) from its detection. At the same time, the buyer must present a verifiable account of when the product was purchased. In addition, an agreement must be made with the manufacturer on the method of repair and on who is to perform the warranty repair.
Rej-Design Oy, Yrittäjänkatu 13, FI-04440 Järvenpää
Tel. +358 9 8689 390, Fax. +358 9 8689 3939,
mail@rejdesign.fi,
www.rejdesign.fi
V 11/13