Lightcloud Nano Controller User Manual

June 3, 2024
Lightcloud

Lightcloud Nano Controller

The Lightcloud Blue Nano is a versatile, compact accessory that expands the available features offered with Lightcloud Blue and RAB’s compatible devices. Connecting the Nano to a Lightcloud Blue system improves features such as SmartShift™ circadian lighting and schedules and enables premium features.

PRODUCT FEATURE

Improves SmartShift circadian lighting
Manual control on/off by clicking button once Change CCT by double clicking button Improves scheduling of Lightcloud Blue devices Enables smart speaker integration
Connect to 2.4GHz Wi-Fi network

Setup & Installation

  1. Download the app
    Get the Lightcloud Blue app from the Apple® App Store or Google® Play Store°

  2. Find a suitable location

  3. Lightcloud Blue devices should be positioned within 60 ft. of each other.

  4. Building materials such as brick, concrete and steel construction may require additional Lightcloud Blue devices to extend around an obstruction.

  5. Plug Nano into power

  6. The Nano has a standard USB-A plug that can be installed into any USB port, such as a laptop, USB outlet, or power strips.

  7. The Nano needs to have constant power in order for it to operate as intended.Lightcloud-Nano-Controller0-fig- \(2\)

  8. Pair the Nano to the app

  9. Each Site can host a maximum of one Nano.

  10. Connect the Nano to Wi-Fi

  11. The Nano should be connected to a 2.4GHz Wi-Fi Network.

  12. Manual Control

  13. The Nano can manually turn all lighting devices in a Site on or off by clicking the on board button once.

  14. By double clicking the button, the Nano will cycle through different color temperatures with compatible devices within the same Site.

  15. Nano Reset

  16. Press and hold the center button on the Nano for 10s. A flashing red light will appear to indicate the Nano has been reset and then revert to a flashing blue when the Nano is ready to pair.

Nano Status Indicators

  • Solid Blue
    Nano is paired to the Lightcloud Blue app

  • Flashing Blue
    Nano is ready to be paired to the Lightcloud Blue app

  • Solid Green
    Nano has successfully established a Wi-Fi connection with the 2.4GHz Wi-Fi network.

  • Flashing Red
    Nano has been restored to default factory settings

  • Flashing Yellow
    Nano is trying to establish a connection to a 2.4GHz Wi-Fi network.

Functionality

CONFIGURTATION

All configuration of Lightcloud Blue products may be performed using the Lightcloud Blue app.

WE’RE HERE TO HELP:
1 (844) LIGHTCLOUD
1 844-544-4825
Support@lightcloud.com

FCC Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following tWO Conditions: 1. Ihis device may not cause harmful interterence, and 2. This device must accept any interterence received, including interference that may cause undesired operation.
Note: This device has been tested and found to Comply with the limits for Class B digital devices pursuant to Part 15 Subpart B, of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential environment. Ihis equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interterence will not OCCur in a particular installation.
If this equipment does cause harmtul interterence to radio or television reception, which can be determined by turning the equipment off and on, the user is encOuraged to try and correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

To comply with the FCC’S RF exposure limits for general population uncontrolled exposure, this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be Co- located or operating in conjunction with any other antenna or transmitter. The manutacturer is not responsible for any radio or IV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
CAUTION: Changes or modifications to this equipment not expressly approved by RAB Lighting may void the user’s authority to operate this equipment.

Lightcloud Blue is a Bluetooth mesh wireless lighting control system that allows you to control RAB’s various compatible devices. With RAB’s patent- pending Rapid Provisioning technology, devices can be quickly and easily commissioned for residential and large commercial applications using the Lightcloud Blue mobile app. Learn more at www.rablighting.com

O2022 RAB LIGHTING Inc. Made in China Pat. rablighting.com/ip
1(844) LIGHT CLOUD
1(844) 544-4825

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals