wemo Smart Plug User Guide

June 3, 2024
WeMo

wemo-logo

wemo Smart Plug

Setup

wemo-Smart-Plug-1

  1. Plug in your Wemo and press the power button.
  2. Wait for the light to alternate \ white and orange.wemo-Smart-Plug-2
  3. Hold the upper back of your phone near the Wemo and follow the prompts that appear. You may need to adjust the angle slightly for the connection to work. Make sure your phone is unlocked.

wemo-Smart-Plug-3

Don’t see setup prompts?
Add(+) a new accessory in the Apple Home app and manually enter the 8-digit HomeKit setup code at the end of this guide.

Control

  • Total control with Apple Home
    Use the Home app to turn Wemos on and off, set schedules, share control, and create groups and custom scenes. Tap the power button to physically turn it on and off.

  • Use voice with Siri
    Make sure to name your Wemo how you’d like to refer to it. Then ask Siri on your iPhone, iPad, or Home Pod to turn your Wemo on or off.

  • Phone-free control of up to 6 scenes with Wemo Scene Controller
    Press one button for a “Goodnight” scene that turns off all smart lights. Press another to make a “Goodbye” scene turn on the Wi-Fi security system.

  • Remote control while away from home
    You must have a HomePod or Apple TV (4K or HD with latest tvOS) or iPad (with latest iOS) set up as a home hub.

How to set up a home hub: support.apple.com/en- us/HT207057

Thread for quicker and more reliable control
Thread is a new wireless technology built into Wemo. It connects smart home devices more quickly and reliably than Bluetooth or Wi-Fi. To take advantage of it, you’ll need an Apple HomePod mini or the latest Apple TV 4K. If you don’t have one of those, your Wemo will connect using Bluetooth.

Restart and restore

Restart
Having setup or control issues? Unplug and plug back in to restart.

Factory restore
If a restart doesn’t help, factory restore your plug.

  1. Press and hold power button for 5 sec
  2. Release when the light blinks white
  3. Follow setup steps to re-add to Apple Home

What does the light color tell me?

  • Off
    Your Wemo is off and working properly.

  • Solid White
    Setup is successful and your Wemo is on.

  • White and Orange (alternating)
    Your Wemo is ready for setup.

  • Fast Blinking Orange (about 4x a sec)
    Your Wemo is overheating. Don’t worry, we turned it off to let it cool down. Unplug, wait 1 min, then plug back in.

HomeKit Setup Code

Keep this code in case you need it later.

Got questions

Call us at 1-844-745-WEMO
For license agreement and warranty information, go to belkin.com/legal.

SAFETY WARNING
Wemos are not designed for use with water pumps or heating appliances. Do not use Wemos with anything that might be dangerous if left unattended.

Regulatory Information and Safety Notices
The following paragraphs are required by the FCC and prove that this product meets all regulatory limits with regard to radio interference and radiation exposure. If you use this product as intended you will have no issues with either.

FCC Compliance Statement

We, Belkin International, Inc., of 12045 E. Waterfront Drive, Play a Vista, CA 90094, Customer Service Tel: 310-751-5100, declare under our sole responsibility that the product, WSP100, to which this declaration relates, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference t o radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the distance between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 35 cm between the radiator and your body.
Innovation, Science and Economic Development (ISED) Canada Compliance Statement CAN ICES-003 (8)/NMB-003 (8)

This device complies with ISED’s license-exempt RSS standards. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The device could automatically discontinue transmission in case of the absence of information to transmit or operational failure. Note that this is not intended to prohibit the transmission of control or signaling information or the use of repetitive codes where required by the technology. This device and its antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with ISED multi-transmitter product procedures. This device has been designed to operate with an antenna having a maximum gain of -2.5 dBi at 2.4 GHz. Antenna having a higher gain is strictly prohibited per regulations of ISED. The required antenna impedance is 50 ohms. The maximum antenna gain to comply with the EIRP limit is provided in the table below.

wemo-Smart-Plug-16

Safety Caution

Important safety and handling information before use. When using this product, basic precautions should always be followed, including, but not limited to, the following.

  • Please read the operating instructions and information on the minimum and maximum operating temperatures supplied with this product.

  • The device is recommended for indoor use.

  • Do not immerse this device in water.

  • The power outlet on the device shall be used within its published outlet rating on the label.

  • Do not place near heat sources or heat-producing devices.

  • Do not expose this product to mechanical shock such as crushing, bending, puncturing, or shredding. Avoid dropping or placing heavy objects on this product.

  • Do not use this product if visible defects are observed or if it has been damaged or modified. Contact the customer service support of Belkin for assistance.

  • Do not attempt to disassemble, open, microwave, incinerate, paint, or insert foreign objects into this product.

  • Attempting to open or service the unit voids all warranties, express or implied. If you experience problems with the device, Discontinue use, unplug the device from wall outlet and contact Belkin for assistance.

  • Warning: To reduce the risk of fire or electric shock, care shall be taken so that objects do. not
    fall and liquids are not spilled into the enclosure through the openings.

  • Unplug this device during lightning storms or when unused for long periods of time.

  • The socket outlet must be near the product’s intended use and easily accessible.

  • To reduce the risk of injury, close supervision is necessary when this product is used near or by children

System Requirements

Wi-Fi router
HomeKit automation and remote access require HomePod, Apple TV, or iPad set up as a home hub.

General Specifications

  • Input: 120V-, 60Hz
  • Output: 120V-, 15A, Max 1800W (Resistive)
  • Number of Power Outlets: 1
  • Thread, Bluetooth, and HomeKit compatible

Operating Conditions:

  • For indoor use only
  • Operating Temperature: 0-40° C

This equipment meets the following requirements as recommended by UL 60730-1
Type 1.8 action
Pollution Degree 2
Rated impulse voltage 1500Vac
For support, please visit: wemo.com/support

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals