wemo WSC010 Stage Smart Scene Controller User Guide
- June 6, 2024
- WeMo
Table of Contents
wemo WSC010 Stage Smart Scene Controller User Guide
What’s in the box?
-
Cradle and faceplate (for optional wall-mounting)
-
Controller
-
CR2032 battery (install + side up)
What you’ll need
To control Wemo Stage, you’ll need an iPhone or iPad and a HomePod, Apple TV, or iPad set up as a home hub. Make sure your devices have the latest software and operating system updates.
- How to set up a home hub: support.apple.com/en-us/HT207057
- HomeKit-compatible devices: apple.com/ios/home/accessories
Quick setup
Use the Apple Home app to:
-
Add Wemo Stage as an accessory
-
Create scenes that control your smart devices
-
Assign scenes to buttons on Wemo Stage
Adding to Apple Home
- Install battery into the controller with the positive side facing up
- Wait for the controller to enter setup mode in the Home app (light blinks yellow and green)
- Launch the Apple Home app
- Hold your phone near the controller and follow the prompts when they appear
For iPhone X or below, you’ll need to add (+) Wemo Stage as an accessory in the Home app.
Creating scenes
Scenes allow you to automatically control single or multiple smart devices with the touch of a button.
Creating scenes in the Home app
- Add a scene (+) from the Home app
- Choose a scene name or create a custom name
- Add accessories (smart devices) to the scene
- Assign actions to these accessories (example: turn on/off a light)
Assigning scenes
Your Wemo Stage can trigger up to 6 scenes. Each button can be assigned a scene for a short press or long press.
Assigning scenes to buttons in the Home app
- Tap your Wemo Stage from the list of accessories
- Decide which button you want to assign the scene to, then choose short press or long press
- Assign your scenes
Example scenes
Bedtime: Place Wemo Stage on your bedside table. Before sleeping, press
to turn off all your home lights and turn on your security system.
Entertainment: Place Wemo Stage on your coffee table. When ready to
party, press to dim the lights and turn on the music or TV.
Guest room on/off: Give guests control of smart lights, fans, blinds, and
other devices in their room.
Status light
-
Off
Working normally; press any button to show status -
Green
A scene has been triggered or setup has just completed -
Yellow
Low-battery level -
Blinking Yellow
An error has occurred -
Yellow and Green (Alternating)
Ready for setup
Installing or changing battery
- Remove the cover on the back of the controller
- Install CR2032 battery in the compartment positive (+) side up
- Replace back cover
Troubleshooting
Restart
Having setup or control issues? Remove and re-insert the battery to restart.
Factory restore
If a restart doesn’t help, factory restore your controller.
- Press and hold Restore button for 5 seconds
- Wait for the light to blink yellow, then green and release
- Re-add your Wemo Stage to Apple Home and reassign scenes to buttons
Wall-mounting
-
Thoroughly clean wall surface.
Remove the paper from the adhesive strips on the back of the cradle. -
Attach the cradle to the wall
-
Snap the faceplate onto the mounted cradle
-
A magnet in the controller holds it to the wall mount
Have questions?
- HomeKit Setup Code
Keep this HomeKit Code handy in case you need it for setup later
- Wemo Stage Support
Visit wemo.com/stage for support with your Wemo Stage
or call us at 1-844-745-WEMO.
For warranty information, go to wemo.com/warranty
References
- Home app - Accessories - Apple
- Set up your HomePod, HomePod mini, Apple TV, or iPad as a home hub - Apple Support
- Wemo Smart Home | Belkin: US
- Wemo Stage Scene Controller with Thread | Belkin | Belkin: US
- Warranty Center | Belkin: US
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>