SANUS BLFS420 Elite Super Slim Full Motion TV Wall Mount Instruction Manual

SANUS BLFS420 Elite Super Slim Full Motion TV Wall Mount

INSTRUCTION MANUAL WE’RE HERE TO HELP

Want to watch a video that shows how easy this is?
Watch it now at: SANUS.com/3115

Get it right the first time. HeightFinder™ shows you where to drill.
Use it now: SANUS.com/1172

Our live US-based install experts are standing by to help.
Call us at:
US: +1 (800) 359-5520

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ MANUAL PRIOR TO USE – SAVE THESE INSTRUCTIONS
CAUTION : Avoid potential personal injuries and property damage!

• This product is designed ONLY to be installed into wood studs, solid concrete or concrete block
  • DO NOT INSTALL INTO DRYWALL ALONE — DRYWALL ALONE WILL NOT HOLD THE WEIGHT OF YOUR TV.
• This product is designed for INDOOR USE ONLY.
• The wall must be capable of supporting five times the weight of the TV and mount combined.
• Do not use this product for any purpose not explicitly specified by manufacturer.
• Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.

Please read through these instructions completely to be sure you’re comfortable with this easy install process.
Check your TV owner’s manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact Customer Service.

TV Weight Limit
(including accessories)

If your TV (plus accessories) weighs MORE , this mount is NOT compatible.
Visit SANUS.com or call customer service to find a compatible mount.

Wall Construction

ONLY install on these acceptable wall types.

Tools Needed

Dimensions

BEFORE YOU BEGIN

• Remove the stand
  from your TV — if attached.

• Install any accessories
  you may have purchased, if they require TV removal prior to assembly. The TV is removable for future accessory purchases.

• Protect the face
  of your TV when laying it down for installation.

Supplied Parts and Hardware

WARNING : This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!
NOTE : Not all hardware included will be used.

STEP 1 Attach TV Brackets to TV

1.3 Attach TV Brackets to Your TV

CAUTION : Avoid potential personal injuries and property damage! DO NOT use power tools for this step. Tighten the screws 06 only enough to secure the TV brackets to the TV.

Wood Stud Installation

STEP 2A Attach Wall Plate
CAUTION: Avoid potential personal injury or property damage!

• Drywall covering the wall must not exceed 5/8 in. (16 mm)
• Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1½ x 3½ in. (38 x 89 mm)
• Minimum spacing between studs: 16 in. (406mm)
• Stud center must be verified

IMPORTANT : Be sure to drill into the center of the stud.
IMPORTANT : Pilot holes must be drilled to a depth of 2 3/4 in. (7 cm), using a 7/32 in. (5.5 mm) diameter drill bit.

CAUTION : Avoid potential personal injury or property damage!
Improper use could reduce the holding power of the lag bolt 09.
Tighten the lag bolts 09 and lag washers 10 only until they are pulled FIRMLY against the wall plate 08.
DO NOT over-tighten the lag bolts 09. Go to STEP 3 on PAGE 8.

Solid Concrete or Concrete Block Installation

STEP 2B Attach Wall Plate
CAUTION: Avoid potential personal injury or property damage!

• Mount wall plate 08 directly onto concrete surface (no wall covering)
• Minimum solid concrete thickness: 8 in. (203 mm)
• Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
• Minimum spacing between lag bolts is 16 in.
• For concrete applications, arm assembly 11 (STEP 3) must remain centered in wall plate 08 . Keep this in mind when selecting wall plate location

Concrete Anchors are not included
Contact Customer Service at 1-800-359-5520 to inquire about the concrete anchors.

CAUTION : Be sure the anchors C1 are seated flush with the concrete surface.
Concrete achors (Fischer UX10 x 60R) C1 available through Customer Service.

CAUTION : Avoid potential personal injury or property damage!
Improper use could reduce the holding power of the lag bolt 09.
Tighten the lag bolts 09 and lag washers 10 only until they are pulled FIRMLY against the wall plate 08.
DO NOT over-tighten the lag bolts 09.

STEP 3 Hang TV onto Wall Plate
3.1 Attach Arm Assembly to Wall Plate
HEAVY! You may need assistance with this step.

3.2 Attach TV to Arm Assembly
HEAVY! You may need assistance with this step.

Manage Cables

1. IMPORTANT: Fully extend arm assembly 11 to ensure enough slack in cables.
2. Route your cables through the arm assembly 11 as shown.

TV Adjustments

TILT ADJUSTMENT
Your TV should adjust easily when moved, then stay in place. If your TV is too loose or too tight use the hex key 15 for additional tightening of the right and left tilt tension screws T.

LEVEL ADJUSTMENT

LATERAL SHIFT
HEAVY! You may need assistance with this step.

CAUTION : Avoid potential injuries or property damage!
Do NOT adjust the arm position from center for concrete applications. Arm 11 MUST remain centered in wall plate 08 for all concrete applications!

1. Remove your TV (PAGE 9).
2. Open the cover plates, remove two screws 12, and loosen screws at bottom of arm S to release arm assembly 11.
3. Reposition the arm assembly 11 on the wall plate (STEP 3.1).
4. Reattach the two screws 12 (STEP 3.1), tigthen the screws at the bottom of arm S, and close the cover plates.
5. Hang your TV onto the arm assembly 11 following STEP 3.2.

Thank you for choosing SANUS Elite!
Please take a moment to let us know how we did:

• Call us: 1-800-359-5520
• Email us: info@sanus.com
• Leave a review: SANUS.com

Legrand AV Inc. and its affiliated corporations and subsidiaries (collectively, “Legrand”), intend to make this manual accurate and complete. However, Legrand makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Legrand makes no representation of warranty, expressed or implied, regarding the information contained herein. Legrand assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

©2022 Legrand AV Inc. All rights reserved. SANUS Elite is a brand of Legrand. SANUS, HeightFinder and the SANUS Elite logo are trademarks of Legrand.

References

• SANUS | #1 Brand of TV Wall Mounts in the U.S.
• SANUS
• HeightFinder | SANUS
• HeightFinder | SANUS
• SANUS BLFS420 | Full-Motion Wall Mounts | TV Mounts and Stands | Products | SANUS
• SANUS VLFS820 | Full-Motion Wall Mounts | TV Mounts and Stands | Products | SANUS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>