AUSLOCK S31B, S31A Smart Locks User Manual
- August 29, 2024
- AUSLOCK
Table of Contents
Smart Lock User Manual
Special Attention:
- Please keep override keys out side of premises just in case you need to use them. (lock also has a power bank override on the front panel in case locks are inside)
- Please replace batteries immediately once receiving any notification via lock or app.
- Read this manual carefully before installation, and keep it for future reference.
Lock Structure
Note: Please email admin@auslock.net to request dimensions of any other mortise not shown below.
Mortise
Installation
3.1 Installation Diagram
3.2 Turn the handle
Notice: The arrow must point to the same direction as the changed
direction of the handle. Remember to adjust the direction of the arrow after
turning the handle.
Specifications
| Suitable for Models | 531 B OR 531A Only |
|---|---|
| Materials | 55304 (stainless steel) |
| Front Panel Lock Size | 280’38’25mm |
| Back Panel Lock Size | 280’638’25mm |
| Lock Weight | 2.5KG |
| Unlocking Features | Bluetooth |
Fingerprint ( 531 B ONLY )
Password
card
Mechanical key
WI-FI (Requires Gateway)
Colour Variations| Silver Black Gold
Grey
White
Door Types| Aluminium door
Wooden door
Sliding door
Swing door
UPVC door
Battery Type| 6V/4x AA Batteries
Door Thickness to Fit| 30-80mm
Data Capacity| Unlimited
Working Temperature| -30°C-60°C
Working Humidity| 20%-90%
Low Power Alarm| Less than 4.5V
System Reset
Open the cover of the battery. Then hold the “Reset” button as shown on the
image for 5s. After that press “000#” on the touch pad to complete the system
reset.
Registration
|
---|---
https://play.google.com/store/apps/details?id=com.auslock.smartlock
| https://apps.apple.com/cn/app/auslock/id1479010417
5.1 Connect the Auslock to the phone
- For Android Devices please scan the left QR code above..
- For Apple Devices please scan the right QR code above.
- You can also download the AUSLOCK APP in the APP store or Google play.
- Register a new account using your phone number/email or login with an existing account.
- Touch the locks screen to light up the buttons then on the App click “+ Add Lock”.
- Once the lock nearby appears on the phone screen click “+”.
- Re-name the lock as you want.
- The lock is added successfully.
5.2 User Management
5.2.1 Bluetooth management
– After you have connected the app to the smart lock please click on the “ ”
icon as shown in figure 2 – 1 to unlock the door.
– Please make sure that the device which the lock is connected to is at least
within 15m of range to the smart lock.
5.2.2 Remote control management (Wi-Fi Option)
Once confirming that your device and Smart lock are connected to the gateway
click the icon as shown in figure 2-1 to unlock. The smart lock can be
unlocked and controlled remotely from any destination in the globe as long as
a network connection is available.
(To set up the gateway please refer to step 5.3)
Note: Please make sure in the settings of the smart lock the “Unlock Remotely”
is turned on otherwise if it is not turned on then the symbol shown above will
not appear.
5.2.3 e-Key management
Click on the “ ” icon as shown in figure 2-1 so you can send the eKey to other
users of the AUSLOCK APP. You can authorize the amount of control the user has
（ the receiver must already have a account set up）→ Enter the recipient’s
email/number that they used to register the AUSLOCK account then set the name
and time of the eKey as shown in figure 2-2→Send→The recipient can now unlock
via Bluetooth.
5.2.4 The Admin Passcode management
Click the “ ” icon as shown in figure 2-1→ See Basic → Admin Pass code as
shown in figure 2-3→ input the Pass code on the keypad of the lock then press
“#” to unlock.
5.2.5 Passcode management
Click on the “ ” icon as shown in figure 2-1→ figure 2-4 You can set the
effective time and the number of passwords → Generate password → Input
password to unlock.
5.2.6 Unlock records
Click “ “as shown in figure 2-1→ you can view your unlock records as shown in
figure 2-5.
5.2.7 Fingerprint management (for S31B)
Click “ ” as shown in finger 2-1→Select either permanent or timed → Set the
name→ Place your finger on the sensor 4 times as instructed → Add fingerprint
ok → Place your fingerprint on the sensor to unlock.
5.2.8 IC Cards management
Click “ ” as shown in figure 2-1→Click “ “→Add IC Cards as figure 2-6
5.3 Add Gateway(Option)
Light Status
Notice: If times out, please power off and try it again.
Packing List
WARRANTY CARD
Please fill the details in the form below then email the form to
admin@auslock.net within 30 days or else full
services may not be offered.
Customer Full Name ：……………………….
Customer Contact No. ：……………………
Place of Purchase ：………………………..
Purchase Date ：…………………………
Product Name ：……………………….
Product Model ：…………………………
Note:
- Please do not lose this card just in case you might need it for warranty service.
- We provide you with a one-year warranty from the date of purchase. Visit www.auslock.net
- This warranty service is valid for customers in any country.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>