E-filliate 1410020 3 In 1 Foldable Wireless Charger User Manual
- August 29, 2024
- E Filliate
Table of Contents
3-in-1 Foldable Wireless Charger
User Manual
Please read the instructions carefully before using
Product Introduction
This product is a 3 in 1 multi-functional wireless charging station, which supports fast charging for phone, iWatch and AirPods at the same time, it provides high efficiency and stable wireless charging for you.
Method of Operation
- Use charging cable provided in the package to connect with the wireless charger, plug the adapter in the power supply.
- Place the devices to be charged in the corresponding charging area, then it will start charging.
LED Light Instructions
These 3 LED indicator lights will change according to the charging status of phone, iWatch and AirPods.
| Phones| iWatch| AirPods
---|---|---|---
Power On| Green On for 3 Seconds| Green On for 3 Seconds| Green On for 3
Seconds
Standby| Turn off| Turn off| Turn off
Charging| Green for 30s then off| Green for 30s then off| Green for 30s then
off
Completed| Turn off| Turn off| Turn off
FOD & Error| Green Flash| None| Green Flash
Specification
Model Number: 17Air
Input: 5V 3A/9V 3A
Output: 5W/7.5W/10W/15W Max(Phone)
Output: 3W(AirPods)
Output: 2.5W (iWatch)
Input Interface: Type-C
Transmission Distance (for phone): ≤4mm
Product Size: 150121.517 mm (Folded)
Product Name: Foldable Wireless Charger
Compatible Model
-
Phone
Phone with wireless charging function and compatible with charging protocol -
iWatch
Apple Watch 9/8/7/6/5/4/3/2/SE 2/SE/Ultra/Ultra 2 -
AirPods
AirPods Charging: for AirPods 2/3/Pro/Pro2 (can work with A2700 A2566, A2190, A1938 AirPods case)
Note: Does not support A2897, A1602 AirPods case
Q&A
Q: What should I do if the charger doesn't work or charge devices intermittently?
A: Please check the following steps: 1. Please make sure your devices have wireless charging function and can be charged wirelessly. 2. Please use the adapter and cable provided in the package 3. Please check if the charging indicator light is on, if not, please unplug and reinsert the adapter and cable. 4. Please use other 18W adapter and charging cable to check if the adapter and cable are damaged. 5. Please make sure that the thickness of the phone case is <=4mm if there is a case and there are no any metal, pop rings, credit cards or magnetic interference charges. 6. Please align the coil of your devices with the charging center. 7. Update your device to the latest system and restart the device.
Q: What should I do if the charging is slow?
A: Please check the following steps: 1. Please make sure to use the 18W adapter and cable provided in the package. 2. Charging efficiency depends on the receiving power of your dev ices and it is not recommended to keep the APP running during slow charging.
Q: What should I do if the charger heats up during charging?
A: Please check the following steps: 1. It is normal for the receiving coil or transmitter board to generate heat during wireless charging. If the charger is too hot please take your phone off from charger to wait the charger to cool down and charge again. 2. It is recommended to avoid using the charger in high tempera true and sun exposure environments as possible.
Safety Notice
- Do not disassemble or throw the product into fire or water to avoid short circuit.
- Do not use wireless charger in extremely hot, humid or corrosive environment.
- Make sure there are no any metal, pop rings, credit cards or magnetic interference charges.
- Keep out of reach of children and pets.
- If the charging station overheats and stops charging during use, please remove the charging device and try charging after cooling down.
- Avoid dropping the product from high place.
Package List
Package List
- Foldable wireless charger* 1
- Type-C charging cable * 1
- User manual * 1
All products brands and trademarks are property of their respective owners.
Made in China
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radiofrequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The FCC certification of this device refers to RF exposure testing performed
in typical operating conditions, where a person is no closer than 20
centimeters from the device surface at all times, except for non-repetitive
patterns with transient time intervals in the order of a second. Only in the
stated conditions, the device is shown to fully comply with the FCC RF
Exposure requirements of KDB 447498.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>