E Filliate 190 9031 True Wireless Earbuds with Charging Case Instruction Manual
- June 6, 2024
- E Filliate
Table of Contents
True Wireless Earbuds
with Charging Case
Instruction Manual
Item no: 190 9031
Package Contents
- True Wireless Earbuds – left and right
- Charging case
- Type C charging cable
- Ear cushions – 3 pairs
- User manual
Customer Service
We’re here to help. If you are not fully satisfied with this product or have
questions on how to use it, please contact E-filliate Inc. You do not need to
contact the retailer from whom the product was purchased. Please contact one
of our service representatives before shipping merchandise to us.
www.efilliate.com
[email protected]
800-592-7031 toll-free
916-858-1000 (916)
858-1009 FAX
11321 White Rock Road
Rancho Cordova, CA 95742 USA
Customer service representatives are available 8 a.m.-5 p.m. PT, M-F
DO NOT store or use the earbuds in locations where the temperature may
reach or exceed 105° F (40° C) (such as outside sheds or metal buildings in
summer). For the best life, store earphones in a cool, dry location. The True
Wireless Earbuds should not be disposed of as municipal solid waste. To
recycle it, contact your local hazardous waste processor or contact Call 2
Recycle® on their website, call2recycle.org, or by phone at
877-273-2925 to find the nearest drop-
off location for lithium-polymer batteries.
WARNING: Burn hazard. Battery liquid may be flammable if exposed to spark
or flame.
WARNING: Fire hazard. Never attempt to open the battery pack for any
reason. If the battery pack is cracked or damaged, do not insert the charging
cable. Do not crush, drop or damage the battery. Do not use the earphones if
they have received a sharp blow, been dropped, run over, or damaged in any way
(e.g. pierced with a nail, hit with a hammer, stepped on).
Damaged batteries should be returned to a service center for recycling.
GUARANTEED FOR LIFE
E-filliate warrants to the consumer that the product and all accessories provided in the sales package (“Product”) are free from material defects in material and workmanship when used normally and in accordance with operation instructions. E-filliate will repair or replace (at E-filliate’s option), without charge, a Materially Defective Product. If we repair or replace a Materially Defective Product under the terms of this warranty, this warranty also applies to repaired or replacement Products. If we repair this Product, we may use new or refurbished replacement parts. If we choose to replace this Product, we may replace it with a new or refurbished Product of the same or similar design. E-filliate will return repaired or replacement Products to you in working condition. We will retain defective parts or equipment. Repair or replacement of Product is your exclusive remedy. This warranty does not cover Product that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water or another liquid intrusion, or Product that has been damaged due to repair, alteration or modification by anyone other than an E-filliate authorized representative.
Please note: This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
IMPORTANT SAFETY INSTRUCTIONS FOR ALL RECHARGEABLE BATTERIES
The battery is not fully charged upon purchase. Before using the earbuds, read
the safety instructions below and then follow the charging procedures
outlined.
READ ALL INSTRUCTIONS
Earbuds are splash and sweat resistant with a rating of IPX4 under IEC
standard 60529.
Splash and sweat resistance are not permanent conditions and resistance might
decrease as a result of normal wear and tear. Do not try to charge wet
earbuds.
The charging case does not have any IP rating.
Liquid damage is not covered under warranty.
Do not incinerate the battery module even if it is severely damaged or is
completely worn out. The battery can explode in a fire. Toxic fumes and
materials are created when lithium batteries are burned.
If battery contents come into contact with the skin, immediately wash the area
with mild soap and water. If battery liquid gets into the eye, rinse attention
is needed, the battery electrolyte is composed of a mixture of liquid organic
carbonates and lithium salts. Contents of opened battery cells may cause
respiratory irritation. Provide fresh air. If symptoms persist, seek medical
attention.
DO NOT charge or use the battery in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust.
DO NOT modify the battery in any way to fit a non-compatible charger as
the battery may rupture causing serious personal injury.
Thank you for purchasing the True Wireless Earbuds with Charging Case. With this wireless headset, you can:
- Enjoy convenient wireless hands-free calls
- Control wireless music
- Switch between calls and music
Components at a Glance
TRUE WIRELESS EARBUDS
- Microphone
- Touchpad
- LED indicator (earbud)
CHARGING CASE:
- Charging case
- Battery light indicator
- Type C charge port
CHARGER CONNECTOR CABLE:
- Type C to USB
Getting Started
Charging Your Case
Connect the Type C end of the provided USB cable into the charging case, and
the USB A end into a power source.
- The green LED light on the front panel indicates charging in progress.
- When the case is fully charged, the green light will stay on.
Charging Your Earbuds
- Place the earbuds in the charging case. Close the charging case cover for earbuds to charge.
- The white LED light inside the charging case indicates earbud charging in progress.
- When the earbuds are fully charged, the white light turns off.
Pairing Your Earbuds with Your Bluetooth Device
- Open the charging case, the earbuds will power on automatically and enter pairing mode, the green LED will flash. Take out both earbuds from the charging case.
- Turn on the Bluetooth function of your Bluetooth device. Select “TWS G5” and enter the earbuds passcode “0000” (4 zeros) if prompted. For devices featuring Bluetooth 3.0 or higher, the passcode is not required.
- When successfully connected to a phone or other Bluetooth device, you will hear “DI-DU’, which means both earbuds are connecting to the Bluetooth device.
Single Earbud Pairing (Mono mode)
- Take either earbud from the charging case. The earbud will power on automatically.
- Turn on the Bluetooth function on your device. Select 11WS G5″. Once the pairing is successful, you will hear “DI-DU”.
Pairing Your Earbuds with Another Bluetooth Device
Make sure the Bluetooth function in any other previously paired device is
turned off. Then follow the steps in Pairing Your Earbuds with Your Bluetooth
Device for the new device.
Using Your Earbuds
Turn on the Bluetooth function of your Bluetooth device and take out both
earbuds from the charging case. The earbuds will automatically power on and
reconnect to your previously paired Bluetooth device.
If the last connected device is not available, the earbuds will search and
reconnect to the next most recently connected device. The earbuds will turn
off after 5 mins if no device is available.
POWER ON/OFF| |
---|---|---
Task| Multi-function button| Operation
Power on| Earbuds| Long press earbud touch button for 1.5 seconds
Power off| Earbuds| Click once then press and hold the earbud touch button for
3 seconds
MANAGE YOUR| MUSIC|
Task| Multi-function button| Operation
Play or pause
music
| Right/Left Earbud| Click any earbud once
Skip forward| Right earbud| Double-click the right earbud touch button
Skip backward| Left earbud| Double-click the left earbud touch button
CALL CONTROL|
---|---
Task| Multi-function button| Operation
Pick up/
Hang up| Right/Left Earbud| Click any earbud once
Reject incoming call| Right/Left Earbud| Double-dick any earbud
VOICE CONTROL| |
Task Multi-function button| Operation
Siri/Google Right/Left earbud| Triple-click any earbud
LED INDICATOR STATUS|
Status| Indicator
Low battery level – Charging case| White LED flashes quickly
Low battery level-Earbuds| Green LED flashes quickly for 1.5 seconds
with a prompt “DI-DU” every 60 seconds.
FACTORY RESET
Press and hold the earbud’s touch button for 8 seconds under power-off state,
there will be a prompt of “D0O-D00” and the green LED will stay on for 1.5
seconds.
TECHNICAL DATA EARBUDS
Music time: Up to 7 hours per charge(Total up to 40 hours with charging case)
Talk time: Up to 6 hours per charge(Total up to 35 hours with charging case)
Standby time: 300 hours Charging time: 1-hour Rechargeable lithium-ion
battery: 50mAh on each earpiece Frequency band: 2.4 GHz ISM Band Operating
range: Up to 10 meters (33 feet)
CHARGING CASE
Charging time: 2 hours Rechargeable Li-ion battery: 650mAh
FCC ID: 2ADH6-1909031
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
10/2021
Documents / Resources
| E
Filliate 190 9031 True Wireless Earbuds with Charging
Case
[pdf] Instruction Manual
1909031, 2ADH6-1909031, 2ADH61909031, 190 9031 True Wireless Earbuds with
Charging Case, True Wireless Earbuds with Charging Case
---|---