PORTBOR KBR-SP01 Portable Wireless Bluetooth Small Speaker Instruction Manual
- August 29, 2024
- PORTBOR
Table of Contents
PORTBOR
Portable Wireless Bluetooth Small Speaker
KBR-SO01
Packing content
- 1*PORTBOR KBR-SP01 Bluetooth Speaker
- 1*USB Type C Charge Cable
- 1*AUX-in Cable
- 1*User Manual
Specifications
Product Material: ABS plastic + Fabric + Silicone
Bluetooth Version: 5.3
Waterproof: IPX5
Range: 10m/33ft
Input: DC 5V
Output: 10W
Impedance: 3Q
Battery: 3.7V/3000mAh Li-ion
Unit Dimension: 97mm x 97mm x 132mm
Charge Time: 5-6H
Play Time: 12-15H (Only mid volume )
Warranty: One-year
Model: KBR-SP01
Bluetooth Name: KBR-SP01
Product overview
Buttons and controls
No.| Buttons| You want to|
How to
---|---|---|---
I| | Turn on/off| Press and hold on
| Restore factory settings| Press and hold on 8s
2| | Increase the volume| Press and hold on
Skip to the next song| Press
3| | Decrease the volume| Press and hold on
Skip to the previous song| Press
4| | Play / Pause the song (Bluetooth mode)| Press
Search / Confirm the FM channel| Press
5| | Change to Bluetooth / FM / AUX mode| FM/AUX Mode: Plug in USB Type-C
charge /AUX cable first, then Press M button to switch
Pairing / Cancel dual speakers| Press twice continuously
6| | Switch the LED lights mode| Press
Indicators
State of charge
Charging: Red light steady on
Charged full: Red light off
How to pair your device via Bluetooth?
- Enable Bluetooth on your device and search for the speaker.
- Select KBR-SP01 on the Bluetooth list.
- Once paired, you can see the connected status on your device.
How to pairing dual (TWS) KBR-SP01 speakers?
- Turn on the 2 speakers
- Press the M button twice consecutively on any speaker, you will hear a short cue sound, which means the Bluetooth of the two speakers are connected each other. (If it is not successful, you need to repeat steps 1-2)
- Open your device’s Bluetooth and searched one model which named: KBR-SP01, connect it is OK.
[Please Note: The DUAL(TWS) Speakers Pairing function is only supported in Bluetooth mode, if you switch to FM/AUX mode, the dual pairing function will be canceled automatically. ]
How do I use the FM radio function?
(Please note: This FM mode can only search for channels one by one, and cannot be adjusted frequency.)
- Insert the USB Type C charge cable first
- Press the M button until changes to FM mode
- Press the to searching channels
a. After all channels be searched completed, it will be automatically positioned to any one channel in your searched and play
b . You can also press the to stop the search if you needn’t too many channels, and it will be positioned to the current channel. (After the search is complete, the channels will be saved automatically )
Press “+”, “-” to jump to the previous and next channel within the FM channel range you searched
Press and hold +, – to adjust the volume up or down If you need to search the channels again, press the power button to search again.
Dear Valued Customer:
Thank you for choosing our product. Your satisfaction is the motivation for us
to develop our little start-up in this highly competitive market. If you have
any questions about the use of products and quality issues, please feel free
to contact us! We’ll try our best to respond within 24 hours, and solve the
problem for you, we hope to bring you a happy shopping experience!
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance Ocm between the radiator and your
body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>