Xhorse XKB5 Universal Remote Key User Manual

August 29, 2024
Xhorse

Xhorse XKB5 Universal Remote Key

Product Specifications

  • Model: XKB5 Universal Remote Key
  • Battery Type: 2032, 3V
  • Frequency Band : RFID (433.92 MHz)
  • Max Permitted Power: -26.69 dBm

Product Information

The XKB5 Universal Remote Key is a versatile device designed to work with various vehicle models. It features buttons for the mechanical key, lock, trunk, and unlock functions. The remote key operates on a 2032 3V battery and uses RFID technology at 433.92 MHz frequency.

Product Usage Instructions

Changing the Battery:

  1. Break open the back side plastic cover of the remote.
  2. Take out the old battery and replace it with a new 2032 3V battery.
  3. Ensure that the positive and negative terminals of the battery are correctly aligned.

Pairing with Vehicle:

  1. Refer to the corresponding vehicle models to match the remote key.
  2. Install the key in the same manner as before.

Frequently Asked Questions (FAQ)

  • What type of battery does the XKB5 Universal Remote Key use?
    The remote key uses a 2032 3V battery.

  • How do I pair the remote key with my vehicle?
    To pair the remote key with your vehicle, refer to the corresponding vehicle models and follow the installation instructions provided in the user manual.

Overview

XKB5 Universal Remote Key is suitable for vehicle which contains the Xhorse receiver.
Note: The operating temperature of the product is -20–50℃.

Button description

  1. Switch button for mechanical key
  2. Lock button
  3. Trunk button
  4. Unlock button

Change battery

First use or when the battery runs out need to change new battery, following steps:

  1. Break open the back side plastic cover to open the remote

  2. Take the battery out and replace new one
    Note: The battery type is 2032 with 3V, ensure the positive and negative of battery is correct.

  3. Install the key same as before

Pairing method

Pairing with vehicle: Referring to the corresponding vehicle models to match.

FCC statements

15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference
  2. this device must accept any interference received, including interference that may cause undesired operation.

15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

RF warning for Portable device

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

CE statements

Frequency Band(s)
This device operates with the following frequency bands and maximum frequency power.
Note: The product is compliant with these power limits required by the European Union. Frequency bands support-ed by the product vary by model.
RFID (433.92 MHz) Max Pe.r.p. is -26.69 dBm.

EU DECLARATION OF CONFORMITY

Hereby, Shenzhen Xhorse Electronics Co., Ltd. declare that Universal Remote Key with model XKB5 is in compliance with Directive 2014/53/EU and 2011/65/EU.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals