SHURE QLXD Digital Wireless System Owner’s Manual
- August 28, 2024
- Shure
Table of Contents
QLXD Digital Wireless System
“`html
Specifications
- Model: QLX-D Wireless System
- Version: 7.2 (2024-D)
- Frequency Range: Varies by region
- Transmitter Output Power: Varies by model
- Receiver Output Connectors: TA4M Input Connector
Product Usage Instructions
Quickstart Instructions
-
Step 1: Power and Antenna Connection
- Connect power supply and antennas to the receiver.
-
Step 2: Scanning for the Best Available Channel
- Use the scanning feature to find the optimal channel for
transmission.
- Use the scanning feature to find the optimal channel for
-
Step 3: Install Batteries into Transmitter
- Insert AA batteries into the transmitter.
-
Step 4: IR Sync to Create an Audio Channel
- Synchronize the transmitter with the receiver for audio
transmission.
- Synchronize the transmitter with the receiver for audio
-
Step 5: Sound Check and Gain Adjustment
- Perform a sound check and adjust gain levels as needed.
Hardware Interface
Learn about the receiver front and back panels, display, and how
to navigate menus for optimal setup.
Battery Installation
- Setting the AA Battery Type
- Configure the system to recognize AA batteries.
- AA Battery Installation
- Install AA batteries into the receiver and transmitter as
needed.
- Install AA batteries into the receiver and transmitter as
System Set Up
-
Creating Audio Channels
- Scan for channels and synchronize transmitters for audio
transmission.
- Scan for channels and synchronize transmitters for audio
-
Radio Frequency (RF) Settings
- Adjust transmitter RF power and configure RF settings as
required.
- Adjust transmitter RF power and configure RF settings as
FAQ
Does QLX-D have DC voltage for antenna amps?
The QLX-D system does not provide DC voltage for antenna
amplifiers. Ensure external amplifiers are powered separately.
“`
QLX-D
Wireless System
Shure QLXD wireless system user guide. Includes dimensions, frequency bands,
error codes, and more. Version: 7.2 (2024-D)
Shure Incorporated
Table of Contents
QLX-D Wireless System
4
Quick Links
4
System Overview
4
Features
4
System Components
5
Single and Dual Rackmount Assembly
7
Quickstart Instructions
8
Step 1: Power and Antenna Connection
8
Step 2: Scanning for the Best Available Channel
9
Step 3: Install Batteries into Transmitter
9
Step 4: IR Sync to Create an Audio Channel
10
Step 5: Sound Check and Gain Adjustment
10
Wearing the Bodypack
10
Hardware Interface
11
Receiver Front and Back Panels
11
Receiver Display
13
Navigating the Receiver Menus
14
Transmitters
17
Transmitter Display
18
Transmitter Menu Options and Navigation
19
Control Lock Options for the Receiver and Transmitter 21
Battery Installation
22
Setting the AA Battery Type
22
AA Battery Installation
23
Shure SB900 Series Rechargeable Battery
23
Low Battery Alert
25
Receiver Gain Adjustment
25
Audio Signal Encryption
25
System Set Up
26
Creating Audio Channels
26
Scan and IR Sync
27
Step 1: Scanning to Find the Best Channel
27
Network Scan
27
Step 2: IR Sync for Automatic Transmitter Set Up
28
Manual Group and Channel Assignment
28
Manual Frequency Selection
28
Linking Two Transmitters to a Receiver
29
Radio Frequency (RF) Settings
30
Setting the Transmitter RF Power
30
Using QLX-D with a Shure ULX-D System
30
Setting Regional TV Channel Spacing
31
Custom Groups
31
Networking
33
Connecting to a Network
33
Automatic IP Addressing
33
Configuration Tips
33
Network Troubleshooting
33
Setting the IP Address and Subnet Mask Manually 34
Connecting to an External Control System
34
Factory Reset
35
Managing Your System with Shure Software
35
Firmware Updates
35
Firmware Versioning
35
Downloading and Updating Firmware
35
Updating the Receiver
36
Updating the Transmitter
36
Troubleshooting
37
2/57
Error Codes and Solutions
38
Contact Customer Support
40
Accessories
40
Optional Accessories
40
Specifications
43
QLXD4
45
QLXD1
46
QLXD2
47
Receiver Output Connectors
48
TA4M Input Connector Diagram
48
Frequency Range and Transmitter Output Power
49
Shure Incorporated
Frequencies for European Countries
50
IMPORTANT SAFETY INSTRUCTIONS
53
WARNING
55
Important Product Information
55
LICENSING INFORMATION
55
Information to the user
55
Australia Warning for Wireless
56
Certifications
56
QLXD1, QLXD2, QLXD4
56
QLXD1, QLXD2
57
QLXD4
57
3/57
Shure Incorporated
QLX-D Wireless System
Quick Links
Links to common tasks and frequently asked questions. Adjust the gain Lock and
unlock the receiver and transmitter Error messages Factory reset the receiver
Set up QLXD on a network Mic offset Does QLX-D have DC voltage for antenna
amps?
System Overview
QLX-D® Digital Wireless delivers defined, streamlined performance with
transparent 24-bit digital audio. Combining professional features with
simplified setup and operation, QLX-D offers outstanding wireless
functionality for demanding live sound events and installations. Shure digital
wireless technology enables QLX-D to transmit clearly detailed audio with
extended, virtually flat frequency response. Designed to be highly RF spectrum
efficient, QLX-D can operate more than 60 compatible channels simultaneously
in a single frequency band. Automatic channel scan and IR sync make finding
and assigning an open frequency quick and easy. Ethernet connection provides
networked channel scanning across multiple receivers and Shure Wireless
Workbench® control software compatibility for advanced frequency coordination.
AES-256 encryption comes standard and can be easily enabled for secure
wireless transmission. QLX-D also adds Shure rechargeable power options to
provide dramatic long-term cost savings and extended transmitter battery life
over alkaline batteries, and battery metering that reports remaining runtime
in hours and minutes. With clearly defined performance and innovation, QLX-D
delivers the very latest in digital wireless technology from Shure.
Features
· Transparent 24-bit digital audio · Extended 20 Hz to 20 kHz frequency range
(microphone dependent) · 120 dB dynamic range · Digital predictive switching
diversity · 64 MHz tuning bandwidth (region dependent) · More than 60
available channels per frequency band (region dependent) · Up to 17 compatible
systems per 6MHz TV band; 22 systems per 8 MHz band · Easy pairing of
transmitters and receivers over IR scan and sync · Automatic channel scan ·
Ethernet networking for multiple receiver systems · Network channel scanning
configures open frequencies for networked receivers
4/57
· Compatible with Shure Wireless Workbench 6 control software · Remote control
from a mobile device or tablet via ShurePlusTM Channels app · AES-256
encryption for secure wireless transmission · Elegant and easy-to-use
interface with high-contrast LCD menu · Compatible with external control
systems such as AMX or Crestron · Professional-grade all-metal construction ·
Transmitters use 2 AA batteries or Shure rechargeable battery
System Components
Shure Incorporated
QLXD4 Receiver PS24 Power Supply 1/2 Wave Antennas (2) 2 ft. BNC Cables with
Bulkhead Adapters (2) Choice of QLXD1 Bodypack Transmitter or QLXD2 Handheld
Transmitter AA Alkaline Batteries (not included in Argentina) Rackmount
Hardware
Model Variations
Model variations with additional components are available to meet specific
performance situations.
QLXD2 Handheld Transmitter
Includes QLXD2 Handheld, available with any of the following microphone
cartridges:
· SM58 · Beta 58A · SM86 · Beta 87A · SM87A · Beta 87C · KSM9 · KSM9HS (black)
· NXN8/C (black) · NXN8/S (black)
5/57
Microphone Clip Battery Contact Cover Zipper Bag
QLXD1 Bodypack Guitar System
Includes QLXD1 bodypack transmitter WA305 Premium instrument cable Zipper Bag
QLXD1 Bodypack Headworn or Lavalier
Includes QLXD1 bodypack, available with any of the following microphone
cartridges:
· Beta 98H/C · WL93 · WL183 · WL184 · WL185 · MX150 (omni) · MX150 (cardioid)
· MX153 (black or tan) · SM35
Zipper Bag
Bodypack and Handheld Combo System
· QLXD1 bodypack transmitter with WL185 Microflex cardioid lavalier microphone
· QLXD2 handheld transmitter with Shure SM58 microphone cartridge · Battery
Contact Cover · Zipper Bag (2)
Shure Incorporated
6/57
Single and Dual Rackmount Assembly
Shure Incorporated
Securing the AC Power Cord
7/57
Installing Footpads
Shure Incorporated
Quickstart Instructions
Step 1: Power and Antenna Connection
Connect an antenna to each of the antenna connectors. Connect the power supply
to the receiver and plug into an AC power source. Connect the receiver audio
output to a mixer or amplifier. Press and hold the power button to turn on the
receiver.
Installing Bodypack Antennas
Hand-tighten antennas until secure. Do not use tools. 8/57
Step 2: Scanning for the Best Available Channel
1. Press the menu button on the receiver to access the scan function.
Shure Incorporated
2. Press the enter button to start a frequency scan. The scan icon will flash while in scan mode. When the scan is complete, the selected group and channel appear on the display.
Step 3: Install Batteries into Transmitter
Accessing the Battery Compartment
Press the side tabs on the bodypack or unscrew the cover on the handheld as
shown to access the battery compartment.
Installing Batteries
AA batteries: Place batteries (note polarity markings) and AA adapter as shown
Shure rechargeable battery: Place battery as shown (note polarity markings),
remove AA adapter from bodypack trans-
mitter, stow AA adapter in door for handheld transmitter
Note: If using AA batteries, select a battery type from the transmitter menu
to ensure accurate battery metering.
9/57
Shure Incorporated
Step 4: IR Sync to Create an Audio Channel
1. Turn on the transmitter. 2. Press the sync button on the receiver. The red
ir LED will blink indicating that sync mode is active. 3. Align the IR sync
windows of the transmitter and receiver at a distance of <15 cm (6 in.). When
the transmitter and re-
ceiver are aligned, the red ir LED remains on and the sync will automatically
occur.
4. A success message appears on the display when IR sync is complete. The
blue rf LED will illuminate indicating that the transmitter is within range of
the receiver.
Note: If the IR sync fails, repeat the IR sync procedure, carefully
maintaining alignment between the IR windows of the transmitter and receiver.
Step 5: Sound Check and Gain Adjustment
1. Test the transmitter at performance levels while monitoring the audio
meter and the audio LED. The audio meter should display at least 3 bars and
the audio LED should be green. Reduce the gain if there is audible distortion
of the audio.
2. Increase or decrease the gain if necessary by pressing the arrow buttons
on the receiver front panel.
Wearing the Bodypack
Clip the bodypack to a belt or slide a guitar strap through the bodypack clip
as shown. For best results, the belt should be pressed against the base of the
clip.
10/57
Shure Incorporated
Hardware Interface
Receiver Front and Back Panels
Display
Shows menu options, receiver and transmitter settings.
Arrow Buttons
Adjust gain setting or change menu parameters.
Enter Button
Press to save menu or parameter changes.
Sync Button
Press to activate IR sync.
Power Switch
Powers receiver on or off.
Audio LED
Green = normal Yellow = signal approaching limiter threshold Red = limiter
engaged to prevent clipping
11/57
Menu Button
Press to access or select menu screens Press to cancel pending changes Press
and hold to return to the home screen
RF LED
Illuminates when RF link with transmitter is active.
IR Window
Align with the transmitter IR window during an IR sync to automatically
program transmitters.
Sync LED
Blinking: IR sync mode is enabled On: Receiver and transmitter aligned for IR
sync
Shure Incorporated
Power Cord Strain Relief
Secures power cord.
Power Supply Jack
Connection point for DC power supply.
Ethernet Port
For network connection. Amber LED (network speed):
off = 10 Mbps, on = 100 Mbps Green LED (network status):
off = no network link, on = network link active flashing = rate corresponds to
traffic volume
Receiver Reset
Press to restore receiver default settings.
12/57
Antenna Connectors
BNC connector for receiver antennas
Mic/Line Switch
Sets output level to microphone or line.
XLR Audio Output
Balanced (1: ground, 2: audio +, 3: audio – )
1/4″ Instrument/Auxiliary Output
Impedance Balanced (Tip: audio, Ring: no audio, Sleeve: ground)
Receiver Display
Shure Incorporated
Group
Displays group setting.
Channel
Displays channel setting.
Active Antenna Indicator
Illuminates to indicate which antenna is active.
RF Signal Meter
Number of bars displayed corresponds to RF signal level – OL = overload.
Audio Meter
Number of bars displayed corresponds to audio level. OL = Illuminates when
receiver audio limiter is active to prevent clipping TxOL = Illuminates when
transmitter input is overloaded. Reduce input from microphone or instrument to
prevent clipping.
Gain Level
Displays receiver gain setting in 1 dB increments.
Receiver Lock Status
13/57
Shure Incorporated
Lock icon and name of locked control: menu power gain
Frequency Setting
Selected frequency (MHz).
Encryption Status
Illuminates when encryption is enabled.
Scan
Displayed when scan function is active.
Network Scan
Displayed when networkscan function is active in multi-receiver systems.
Network Connection Indicator
Illuminates when additional Shure components are detected on the network.
TV Channel
Displays the number of the TV channel containing the selected frequency.
Transmitter Battery Icon
Indicates remaining battery life. Enable the Low Battery Alert to flash the
receiver display when battery runtime is less than 30 minutes.
Rechargeable Battery Runtime
When the transmitter is powered by a Shure rechargeable battery, remaining
runtime is displayed in hours:minutes.
Navigating the Receiver Menus
The receiver has a main menu for setup and configuration and an advanced menu
to access additional receiver functions.
Main Menu
Press the menu button to access the menu. Each additional press of the menu
button advances to the next menu screen in the following order:
14/57
Shure Incorporated
Scan
Receiver automatically scans for the best available frequency
Network Scan
Scans to find frequencies for networked receivers operating in the same
frequency band (available when connected to a network with receivers in the
same band)
Group
Edit the receiver group settings
Channel
Edit the receiver channel settings
Lock
Choose a control lock option
Encryption
Use the arrow buttons to enable encryption (on) or disable encryption (off)
Frequency
Use the arrow buttons to edit the frequency value
Advanced Menu
From the home menu, press and hold enter, and then press the menu button.
Navigate by pressing the menu button.
Custom Groups
Use to add channels and frequencies to custom groups
TV Channel Spacing
Selects the regional bandwidth for TV channel display
Low Battery Alert
Enable or disable the low battery alert on the receiver screen
Boundary/Gooseneck Transmitter Presets
Sends ULXD6/ULXD8 presets configured in WWB to transmitters via the IR Sync
window
15/57
Shure Incorporated
Firmware Update
Displays what kind transmitter firmware the receiver has available. See
Firmware Updates for more details. HHBP = handheld or bodypack firmware BNGN =
boundary or gooseneck firmware
IP Settings
Use to select and edit IP settings and subnet masks
Network Reset
Returns network settings and IP address to default setting
Factory Reset
Restores factory settings For application and configuration details, see the
related guide topic for each advanced feature.
Tips for Editing Menu Parameters
· To increase, decrease or change a parameter, use the arrow buttons · A menu
setting will blink when editing is enabled · To save a menu change, press
enter · To exit a menu without saving a change, press menu · To access the
advanced menu, press menu while holding the enter button from the home screen
· To return to the home screen from any menu without saving changes, press and
hold the menu button.
16/57
Transmitters
Shure Incorporated
Power LED
Green = unit is powered on Red = low battery
On/Off Switch
Powers the transmitter on or off.
Display:
View menu screens and settings. Press any control button to activate the
backlight.
IR window
Align with the receiver IR window during an IR sync for automated transmitter
programming.
Menu Navigation Buttons
menu = Use to navigate between menu screens. = Use to select menu screens,
edit menu parameters, or choose a home screen display option. enter = Press to
confirm and save parameter changes. Tip: Press the menu button to exit without
saving parameter changes.
17/57
Shure Incorporated
Battery Compartment
Requires 2 AA batteries or a Shure rechargeable battery.
AA Battery Adapter
Secures batteries when powering transmitter with AA batteries instead of Shure
rechargeable battery.
Bodypack Antenna
For RF signal transmission.
Handheld Integrated Antenna
For RF signal transmission.
Microphone Cartridge
See Optional Accessories for a list of compatible cartridges.
TA4M Input Jack
Connects to a 4-Pin Mini Connector (TA4F) microphone or instrument cable.
Battery Contact Cover
Align the cover as shown to prevent reflections from the battery contacts
during broadcasts or performances.
Transmitter Display
Battery Indicator
Bars displayed indicate remaining battery life.
Home Screen Display: Group and Channel/Frequency/Shure Rechargeable Battery
Runtime
Use the arrow keys to select one of the following home screen displays:
Group and Channel
Shure rechargeable battery runtime Frequency
Encryption Status
Icon displayed when encryption is enabled.
Lock
Displayed when transmitter controls are locked.
RF Power
RF power setting (Lo or Hi).
Mic Offset
18/57
Displays micoffset level in 3 dB increments.
Shure Incorporated
Transmitter controls
· To increase, decrease or change a parameter, use the buttons · To save a
menu change, press enter · To exit a menu without saving a change, press the
menu button
Bodypack
Handheld
Transmitter Menu Options and Navigation
The transmitter features individual menu screens for setting up and adjusting
the transmitter. To access the menu options from the home screen, press the
menu button. Each additional press of the menu button advances to the next
menu screen.
Home Screen
Use the arrow keys to select one of the following home screen displays:
Battery Icon/group and channel Battery Icon/frequency Battery Icon/Battery
Runtime (if Shure rechargeable battery is installed)
19/57
Shure Incorporated
group
Use the arrow buttons to scroll through the groups.
channel
Use the arrow buttons to scroll through the channels.
frequency
Use the arrow buttons to adjust the frequency. Press and hold for faster
scrolling.
lock
Select a lock option: On = controls locked OFF = controls unlocked
rf power
Select an rf power setting: Lo = 1 mW Hi = 10 mW
mic offset dB
Use to match audio levels between two transmitters used in a combo system.
Range is 0 to 21 dB (3 dB increments). Adjustments occur in realtime.
battery type
Use to set the battery type to match the installed AA battery type to ensure
accurate battery metering. Menu is not displayed when Shure rechargeable
batteries are installed.
Tips for Editing Menu Parameters
· To access the menu options from the home screen, press the menu button. Each
additional press of the menu button advances to the next menu screen. 20/57
Shure Incorporated
· A menu parameter will blink when editing is enabled · To increase, decrease
or change a parameter, use the arrow buttons · To save a menu change, press
enter · To exit a menu without saving a change, press menu
Control Lock Options for the Receiver and Transmitter
Control lock options are available for both the receiver and the transmitter
to protect against accidental or unauthorized changes. Locks can be directly
set from the component menu, or remotely set from WWB6. To maintain
protection, controls remain locked when the transmitter is turned off and
turned on.
Locking and Unlocking the Receiver Controls
The receiver has the following control lock options which can be used
separately or in any combination: · gain: locks the arrow buttons to prevent
changes to the audio gain settings · menu: prevents access to menu items and
IR sync (gain controls and power switch remain active) · power: disables power
switch (gain and menu controls remain active)
To lock a receiver control: 1. Press the menu button to navigate to the lock
settings. 2. Use the arrow buttons to add or remove the lock options shown
next to the lock icon. 3. Press enter to save the lock settings.
To unlock a receiver: Tip: To unlock the menu and clear all locks, press and
hold the menu button while in the home screen until the unlock icon appears.
Press enter to confirm and save change.
1. To unlock gain or power settings, navigate to the lock settings by
pressing the menu button. 2. Press the arrow buttons to de-select a lock
option. 3. Press enter to confirm and save change.
Locking and Unlocking Transmitter Controls
The transmitter controls can be locked or unlocked by selecting On (locked) or
OFF (unlocked) from the transmitter lock menu. If an attempt is made to access
a locked control, the lock icon will flash, indicating that the transmitter
controls are locked. To set a transmitter lock:
1. Press the menu button to navigate to the lock settings. 2. Use the arrow
buttons to select on. 3. Press enter to save. The lock icon appears on the
display to confirm that the control locks are enabled. To unlock the
transmitter: 1. Press and hold the menu button until OFF and the unlock icon
appear on the display. 2. Press enter to save changes.
21/57
Battery Installation
Shure Incorporated
Accessing the Battery Compartment
Press the side tabs on the bodypack or unscrew the cover on the handheld as
shown to access the battery compartment.
Installing Batteries
AA batteries: Place batteries (note polarity markings) and AA adapter as shown
Shure rechargeable battery: Place battery as shown (note polarity markings),
remove AA adapter from bodypack trans-
mitter, stow AA adapter in door for handheld transmitter
Note: If using AA batteries, set the battery type using the transmitter menu.
Setting the AA Battery Type
To ensure accurate display of transmitter runtime, set the battery type in the
transmitter menu to match the installed AA battery type. If a Shure
rechargeable battery is installed, selecting a battery type is not necessary
and the battery type menu will not be displayed.
1. Press the menu button to navigate to the battery icon.
2. Use the buttons to select the installed battery type: AL = Alkaline nH =
Nickel Metal Hydride Li = Lithium Primary
22/57
3. Press enter to save.
Shure Incorporated
AA Battery Installation
Fully insert the batteries as shown to ensure proper battery contact and to
allow the door to latch securely.
Shure SB900 Series Rechargeable Battery
Shure lithium-ion batteries offer a rechargeable option for powering the QLX-D
transmitters. Batteries quickly charge to 50% capacity in one hour and reach
full charge within three hours. Single chargers and multiple bay chargers are
available to recharge the Shure batteries.
Caution: Only charge Shure rechargeable batteries with a Shure battery
charger.
Note:The Shure SB900B rechargeable battery uses SBC200, SBC800 and SBC220
chargers.
Single Bay Charger
The single bay charger offers a compact charging solution.
1. Plug the charger into an AC power source or USB port. 2. Insert a battery
into the charging bay. 3. Monitor the charging status LEDs until charging is
complete.
Charging Status LED
Color Red
Status Charging
23/57
Color Green Amber Flashing Off
Status Charging Complete Fault: check connections and battery No battery in bay
Multiple Bay Chargers
Shure offers two models of multiple bay chargers:
· SBC-200 two bay charger · SBC-800 eight bay charger
Multiple bay chargers can charge individual batteries or batteries installed
in transmitters.
Shure Incorporated
1. Plug the charger into an AC power source. 2. Insert batteries or transmitters into the charging bay. 3. Monitor the charging status LEDs until charging is complete.
Charging Status LED
Color
Status
Green
Charging Complete
Green/Red
Charge level above 90%
Red
Charging
Amber Flashing
Fault: check connections and battery
Off
No battery in bay
Important Tips for Care and Storage of Shure Rechargeable Batteries
Proper care and storage of Shure batteries results in reliable performance and
ensures a long lifetime.
· Always store batteries and transmitters at room temperature · Ideally,
batteries should be charged to approximately 40% of capacity for long-term
storage · During storage, check batteries every 6 months and recharge to 40%
of capacity as needed
24/57
Shure Incorporated
Low Battery Alert
The receiver display can be configured to flash when the battery runtime for a
transmitter is less than 30 minutes.
The alert displays the following information based on the type of batteries
installed in the transmitter:
· Shure rechargeable battery: The receiver screen flashes, the low battery
icon is displayed, and the remaining battery runtime is shown
· AA batteries: The receiver screen flashes and the low battery icon is
displayed 1. Press menu while holding the enter button to access the advanced
menu. 2. Use the arrow buttons to navigate to the Alert screen. 3. Select On
or Off to enable or disable the alert function. 4. Press the enter button to
save.
Receiver Gain Adjustment
The gain control sets the overall signal level for the system. The default
gain level is 12 dB and the available gain range is -18 to 42 dB, in 1 dB
increments. Set the gain to a level where the audio LED appears green or
yellow, with only the highest audio peaks causing the LED to occasionally turn
red and engage the limiter. Reduce the gain if there is audible distortion of
the audio. From the receiver home screen, use the arrow buttons to increase or
decrease the gain:
· A single button press adjusts the gain in 1 dB increments · Press and hold
the button for larger adjustments Test the transmitter at performance levels
when adjusting the gain. Monitor the audio meter and the audio LED to prevent
overloads.
Audio Signal Encryption
The QLX-D receiver features Advanced Encryption Standard (AES-256) to protect
the audio signal. When encryption is enabled, the receiver generates a unique
encryption key which is shared with a the transmitter during an IR sync.
Transmitters and receivers that share an encryption key form a protected audio
path, preventing unauthorized access by other receivers. To maintain security,
components remain encrypted when turned off and on.
25/57
Shure Incorporated
Creating an Encrypted Audio Channel
1. Press the menu button to navigate to the encryption menu, indicated by the
key icon. 2. Use the arrow buttons to select an encryption option:
on = encryption enabled OFF = encryption disabled 3. Press enter to save. The
key icon will be shown on the receiver display. 4. Press the sync button and
align the IR sync windows of the transmitter and receiver. The encryption key
icon will appear on the transmitter screen when the IR sync is complete and
the encryption key has been transferred from the receiver. Additional
transmitters can share the same encryption key with a single receiver. Perform
an IR sync to encrypt each additional transmitter.
Note: When OFF is selected to disable encryption, perform an IR sync to clear
the encryption key from the transmitter and prevent an encryption mismatch
error or FAIL message.
Removing Encryption
1. Press the menu button to navigate to the encryption menu. 2. Select OFF.
3. Press enter to save. 4. IR sync the transmitter and receiver to clear the
encryption key from the transmitter and prevent an encryption key mis-
match between components, indicated by a FAIL message.
Note: If encryption has been set from off to on, the receiver will generate a
new encryption key and must be IR synced to the transmitter to share the new
key.
System Set Up
Creating Audio Channels
A wireless audio channel is formed when a receiver and transmitter are tuned
to the same frequency. To ease setup, frequencies available to the QLX-D
system are organized into groups and channels. Each group contains a number of
channels, and each channel is assigned to a specific preset frequency.
26/57
Shure Incorporated
The QLX-D system provides 3 methods for tuning the receiver and transmitter to
the same frequency: · Scan and IR Sync: The receiver scans the RF spectrum for
the best available frequency and an IR sync automatically tunes the
transmitter to the receiver frequency · Manual Group and Channel Assignment:
Manually setting the receiver and transmitter to the same group and channel
number forms an audio channel · Manual Frequency Assignment: Manually setting
the receiver and transmitter to the same frequency rather than using groups
and channels forms an audio channel
Important: Before you begin a scan or frequency assignment:
· Turn off: All transmitters for system you are setting up to prevent
interference with frequency scans. · Turn on: The following potential sources
of interference including other wireless systems, computers, CD players, large
LED panels, and effects processors to prevent selection of occupied
frequencies.
Scan and IR Sync
The simplest way to create an audio channel is to use the scan function to
find the best available receiver channel, and then use the IR sync feature to
automatically tune the transmitter to the receiver channel.
Step 1: Scanning to Find the Best Channel
The Scan function automatically selects the best available receiver channel.
- Navigate to the Scan menu option. 2. Press enter to start the scan. 3. When
the scan is complete, the channel will appear on the display.
Network Scan
The Network Scan feature automates frequency assignment by using a single receiver to scan and deploy frequencies to all networked receiver within the same frequency band.
Network Scanning and Frequency Deployment
1. Connect receivers to an active Ethernet network. All receivers must be on the same subnet. 2. Prior to performing a network scan, turn on all receivers and allow 60 seconds for all receivers to join the network. 3. Choose a group or custom group for deployment on the receiver that will be used to initiate the network scan. 4. To start a network scan, press the menu button and navigate to the networkscan menu. Press enter. 5. When the scan is complete, the displays of receivers waiting for frequencies will flash. 6. Press enter to deploy the frequencies or press menu to cancel the deployment. 7. The front panel LEDs on each receiver will blink when a deployed frequency has been assigned.
Note: Full frequency deployment may not occur if the number of receivers in the network exceeds the number of available frequencies in the selected group. Try another group or rescan after turning off unused receivers.
27/57
Shure Incorporated
Step 2: IR Sync for Automatic Transmitter Set Up
Performing an IR Sync automatically tunes the transmitter to match the
receiver frequency, forming a wireless audio channel. 1. Turn on the
transmitter. 2. Press the sync button on the receiver. The red ir LED will
blink indicating that sync mode is active. 3. Align the IR sync windows of the
transmitter and receiver at a distance of <15 cm (6 in.). When the transmitter
and receiver are aligned, the red ir LED remains on and the sync will
automatically occur. 4. A success message appears on the display when IR sync
is complete. The blue rf LED will illuminate, indicating that the transmitter
is within range of the receiver.
Note: If the IR sync fails, repeat the IR sync procedure, carefully
maintaining alignment between the IR windows of the transmitter and receiver.
Manual Group and Channel Assignment
An audio channel can be manually created by simply setting the receiver and
transmitter to the same group number and channel number. For example, a
receiver set to Group 2, Channel 3 and a transmitter set to Group 2, Channel 3
would form an audio channel. Use manual group and channel configuration to
assign specific groups and channels to receivers and transmitters as an
alternative method to automatically creating channels with IR sync. Use the
following steps to set the group and channel in the receiver and transmitter:
1. Navigate to the group setting. 2. Use the arrow buttons to scroll through
the groups. 3. Press enter to select a group. 4. Next, use the arrow buttons
to select a channel. 5. Press enter to save.
Manual Frequency Selection
Manual frequency selection can be used instead of groups and channels to set
the transmitter and receiver to a specific frequency. For example, an audio
channel can be created by setting the receiver and transmitter to same
frequency.
Setting the Receiver Frequency
1. Press menu to navigate to the frequency setting option. 28/57
2. Use the arrow buttons to adjust the frequency. Press and hold for faster scrolling. 3. Press enter to save.
Shure Incorporated
Setting the Transmitter Frequency
1. Press menu to navigate to the frequency setting option. 2. Use the arrow
buttons to adjust the frequency. Press and hold for faster scrolling. 3. Press
enter to save.
Linking Two Transmitters to a Receiver
Linking two transmitters to a receiver offers the flexibility to provide a
performer with either a handheld or bodypack transmitter to meet their
preference. For performances requiring instrument changes, two bodypack
transmitters can be linked to a single receiver.
Note: Only turn on and operate one transmitter at a time to prevent
interference between the transmitters.
Syncing the Transmitters to the Receiver
Both transmitters must be individually linked to the receiver by performing an
IR Sync. 1. Turn on the first transmitter and perform an IR Sync with the
receiver. 2. Perform a sound check and adjust the transmitter gain if
necessary. When finished, turn off the transmitter. 3. Turn on the second
transmitter and perform an IR Sync with the receiver. 4. Test the transmitter
at performance conditions and adjust the transmitter gain if necessary. When
finished, turn off the transmitter.
29/57
Shure Incorporated
Matching Audio Levels with Mic Offset
When linking two transmitters to a receiver, there may be a difference in
volume levels between microphones or instruments. If this occurs, use mic
offset to match the audio levels and eliminate audible volume differences
between transmitters. If using a single transmitter, set the mic offset to 0
dB.
1. Turn on the first transmitter and perform a sound check to test the audio
level. Turn off the transmitter when finished. 2. Turn on the second
transmitter and perform a sound check to test the audio level. 3. If there is
an audible difference in the sound level between the transmitters, navigate to
the MicOffset menu on the
transmitter to increase or decrease the mic offset in real time to match the
audio levels.
Radio Frequency (RF) Settings
Setting the Transmitter RF Power
The transmitter offers two RF power settings which determine the transmitter
range.
· Lo = 1 mW · Hi = 10 mW
Use the Lo setting when the transmitter and receiver are in close proximity.
1. Navigate to the transmitter rfpower menu. 2. Use the arrow buttons to
select Hi or Lo. 3. Press enter to save.
Using QLX-D with a Shure ULX-D System
Transmitters and receivers from QLX-D and ULX-D component groups can be paired
to form audio channels. To ensure functionality, use the following settings on
receivers and transmitters:
· Encryption set to Off · High Density Mode set to Off (ULX-D receiver) ·
Manually tune the receiver and transmitter to the same frequency.
Note: IR sync between QLX-D and ULXD6/8 transmitters is possible provided you
are operating on firmware version 2.1.16 or newer.
To create an audio channel, manually set the receiver frequency to match the
frequency of the transmitter.
30/57
Shure Incorporated
If using ULXD6 or ULXD8 transmitters with a QLX-D receiver, you can only make
changes to transmitter presets using Wireless Workbench.
1. Open receiver properties in WWB. 2. Make changes to transmitter presets
and click Apply. The new settings will be sent to the QLX-D receiver. 3. On
the receiver front panel, hold enter while pressing menu to enter the advanced
menu. 4. Press menu to advance to Presetbngn. The IR window will flash.
5. Align the transmitter IR window with the receiver to send the presets to
the transmitter. Important: All QLX-D and ULX-D components must use 2.0
firmware or greater for proper functionality.
Setting Regional TV Channel Spacing
The parameter for TV channel spacing allows the receiver to match regional TV
bandwidth usage and accurately display local TV channels. The following
channel bandwidth options are available:
· 6MHz · 7MHz · 8MHz · 6JP (Japan) · off (use to turn off TV channel display)
To set the TV channel spacing:
1. Press and hold the enter button, and then press the menu button to access
the advanced features menu. 2. Press the menu button to navigate to the TVCH
menu. 3. Use the arrow buttons to select the channel bandwidth that
corresponds to the local region. 4. Press enter to save.
Custom Groups
Specific channels and frequencies can be selected and placed into custom
groups. Custom groups are commonly used to assign networked receivers to a
specific range of frequencies or to pre-configure receivers for rental
applications. Once a custom group has been created, it can be loaded to the
receiver using the group menu. When network scan is used to assign frequencies
from a receiver with a custom group selected, all of custom groups (U1, U2,
U3, etc…) from that receiver will be loaded to all other receivers on the
network.
31/57
Creating Custom Groups
Shure Incorporated
The receiver has 6 custom groups available named U1, U2, U3, U4, U5, and U6.
Selecting A Custom Group
1. Press menu while holding the enter button to access the Custom Group screen. 2. Press enter to enable editing of a group (indicated by the group flashing). 3. User the arrow buttons to select a group (U1 to U6). 4. Press enter to advance to channel selection.
Selecting a Channel
1. Use the arrow buttons to select a channel (1-60). Each group can contain
up to 60 channels (frequencies).
2. Press enter to save the selected channel and advance to frequency
assignment.
Assigning a Frequency to a Channel
1. Use the arrow buttons to assign a frequency to the selected channel. 2.
Press enter to save.
After pressing enter, the channel will flash to allow for adding more channels
and frequencies to the custom group. To add more channels and frequencies,
repeat steps 2 and 3. When finished, press the menu button several times to
return to the main menu.
Transmitter IR Sync from a Custom Group
To ensure accurate display of group and channel information, IR sync the
transmitter from the CustomGroup menu screen:
1. Press menu while holding the enter button to access the Custom Group
screen. 2. Turn on the transmitter and press the sync button on the receiver.
3. Align the IR sync windows of the transmitter and receiver. 4. A success
message appears on the display when IR sync is complete.
Note: If the IR sync fails, repeat the IR sync procedure, carefully
maintaining alignment between the IR windows of the transmitter and receiver.
Deleting a Custom Group
1. Press menu while holding the enter button to access the Custom Group
screen. 2. Press enter to enable editing of a group (indicated by the group
flashing). 3. User the arrow buttons to navigate to display the group number
and the words DEL. 4. Press enter to delete the group.
To delete individual channels from a custom group, do the following:
1. Enter the custom groups menu and select the frequency for the channel to
be deleted. 2. Press and hold an arrow button until the frequency displays —.—
MHz.
32/57
Shure Incorporated
3. Press and hold the menu button to confirm change and exit.
Creating Custom Groups using Wireless Workbench
You can also use Wireless Workbench to define frequencies as a custom group.
Refer to the Wireless Workbench help system for more information.
Networking
The receiver uses an Ethernet connection to network with other components and
includes an internal DHCP client for automatic network configuration when
connected to a DHCP enabled router.
Connecting to a Network
1. Insert an Ethernet cable in the Ethernet port on the rear of the receiver.
2. Connect the cable to a computer or router. 3. The port LEDs on the receiver
will illuminate to indicate network connectivity and network traffic.
Automatic IP Addressing
1. Enable a DHCP service on the server or use a DHCP enabled router. 2. When
the receiver is powered on, the DHCP server will automatically assign an IP
address to the receiver.
Tip: Use the network reset option available in the advanced features menu to
return the receiver to the default DHCP addressing mode.
Configuration Tips
· Use shielded Cat 5 or better Ethernet cables to ensure reliable network
performance · The LEDs on the Ethernet port illuminate indicating a network
connection is active · The network icon illuminates when the receiver detects
additional Shure devices on the network · All components must operate on the
same subnet · Use multiple Ethernet switches to extend the network for larger
installations
Network Troubleshooting
· Use only one DHCP server per network · All devices must share the same
subnet mask · All receivers must have the same level of firmware revision
installed · Look for the illuminated network icon on the front panel of each
device:
If the icon is not illuminated, check the cable connection and the LEDs on the
Ethernet port. If the Ethernet port LEDs are not illuminated and the cable is
plugged in, replace the cable and recheck the LEDs and network icon.
To check connectivity of WWB6 to the network:
1. Start WWB6 software and use Inventory view to see devices connected to the
network. 2. If not, find the IP address from one of the devices on the network
(such as a receiver) and see if you can ping it from
the computer running WWB6. 3. From a WINDOWS/MAC command prompt, type `ping
IPADDRESS’ of the device (e.g. “ping 192.168.1.100”).
33/57
Shure Incorporated
4. If the ping returns success (no packet loss), then the computer can
communicate with the device on the network. If the ping returns failure (100%
packet loss), then verify that the IP address of the computer is on the same
subnet as the receiver.
5. If the pings are successful and the devices still do not show up in the
WWB6 inventory, check to ensure all firewalls are either disabled or allow the
WWB network traffic to pass to the application. Check that firewall settings
are not blocking network access.
Setting the IP Address and Subnet Mask Manually
IP addresses and subnet masks can be manually set from the advanced menu in
the receiver or from the monitor panel in Wireless Workbench. Network settings
entered manually must be valid and conform to IP protocols to ensure proper
network communication.
Receiver Menu
IP addresses and subnet addresses contain 4 groups of numbers. Each group can
contain up to 3 digits. A decimal point separates each group. When setting an
IP address or subnet address, each of the 4 groups must be edited
individually. The following diagram shows how the groups are mapped to the
receiver display:
1. Press menu while holding the enter button to access the advanced menu. 2.
Press the menu button to navigate to the IP menu. 3. Use the arrow buttons to
set the mode to St (static) and press enter. 4. Use the arrow buttons to edit
the first group. Press enter to save and continue to the next group. 5. Use
the arrow buttons and enter button to edit the remaining 3 groups. 6. When
group 4 has been edited, the display will show the subnet mask menu. Use the
arrow buttons to scroll and select
a preset value for each of the subnet mask groups. 7. When finished, press
enter to save settings.
Note: To restore automatic DHCP IP addressing, enter the IP menu and select AU
(automatic). The NetworkReset menu option can also be used to restore DHCP
addressing.
Wireless Workbench
1. Open the ChannelProperties tab in Wireless Workbench. 2. Select Utilities
and set the networking mode to manual. 3. Enter valid numbers in the IP and
Subnet fields. 4. When finished, select Apply.
Connecting to an External Control System
The receiver connects to external controls systems (AMX or Crestron) via Ethernet cables. · Connection: Ethernet (TCP/IP; QLXD receiver is the client)
34/57
· Port: 2202
Shure Incorporated
Factory Reset
You can restore factory settings for the receiver in the advanced menu. From
the home menu, press and hold enter. While holding enter, press menu to access
the advanced menu. Press menu to scroll through the advanced options until you
reach the reset screen, and press enter to reset the receiver.
Managing Your System with Shure Software
Wireless Workbench
Manage every facet of wireless system performance, from pre-show planning to
live channel monitoring, with Wireless Workbench.
· Visit the Wireless Workbench page to download Workbench. · Visit the
Workbench help page to learn how to use Workbench with your system.
ShurePlus Channels Application
Monitor the key elements of your wireless operation on a mobile device over
Wi-Fi with ShurePlus Channels. Use alongside Wireless Workbench or as a stand-
alone application for less complex coordination needs.
· Visit the Channels page to download ShurePlus Channels. · Visit the Channels
user guide to learn how to use Channels with your system.
Firmware Updates
Firmware is embedded software in each component that controls functionality.
Periodically, new versions of firmware are developed to incorporate additional
features and enhancements.
Firmware Versioning
When updating receiver firmware, update transmitters to the same firmware
version to ensure consistent operation. The firmware version is numbered in
the form of MAJOR.MINOR.PATCH (e.g., 1.2.14). At a minimum, all devices on the
network (including transmitters), must have the same MAJOR and MINOR firmware
version numbers (e.g., 1.2.x).
Downloading and Updating Firmware
A free Shure Update Utility tool is available by visiting www.shure.com. The
Shure Update Utility is also bundled with Shure Wireless Workbench software.
Refer to the help instructions to use the Shure Update Utility.
35/57
Shure Incorporated
Updating the Receiver
CAUTION! Ensure that receiver power and network connections are maintained
during a firmware update. Do not turn off the receiver until the update is
complete.
1. Connect the receiver and computer to the same network. 2. Open the Shure
Update Utility. 3. Click on the firmware tab to find available updates. 4. Use
the Import button if manually importing firmware files. 5. Click the
UpdateDevice tab and check the Versiontoinstall box next to each device. 6.
Click SendUpdates to load the firmware to the networked devices. 7. When the
download is complete, the receiver will reboot with the updated firmware
installed.
Updating the Transmitter
To update transmitters, download firmware to the receiver. You can download
firmware for handheld and bodypack transmitters, or for boundary and gooseneck
transmitters. The receiver sends firmware to the transmitter using the IR Sync
window.
1. Press menu while holding the enter button to access the advanced menu. Use
the menu button to navigate to the update menu.
2. The receiver displays the type of transmitter firmware it has available.
The receiver holds one type of firmware at a time. HHBP = handheld or bodypack
firmware BNGN = gooseneck or boundary firmware
3. Press enter to start the update. 4. When the red IR LED flashes, align the
receiver and transmitter IR sync ports. The red LED will remain illuminated to
indicate correct alignment and the download will automatically start. 5.
Maintain alignment during the update and monitor download progress (0 to 100%)
on the receiver screen.
36/57
Shure Incorporated
6. When the update is complete, “TXUpdategood” is shown on the receiver
display. If the screen shows Err.09, update again with a transmitter type that
matches the firmware held by the receiver.
Troubleshooting
Issue No Sound Faint sound or distortion Lack of range, unwanted noise bursts, or dropouts Cannot turn transmitter off or change frequency settings, or can’t program receiver Receiver display shows FAIL after encryption is disabled Group and Channel display shows “–”
See Solution… Power, Cables, or Radio Frequency Gain, Cables, Reducing
Interference or Radio Frequency RF Interface Locks
Encryption Mismatch Custom Group IR Sync
Power
Make sure that the receiver and transmitter are receiving sufficient voltage.
Check the battery indicators. Replace or recharge the batteries if necessary.
Gain
Adjust the system gain on the front of the receiver. Ensure the mic/line
switch setting (XLR output only) on the back of the receiver corresponds to
the input of the mixing console, amplifier, or processor.
Cables
Check that all cables and connectors are fully engaged or locked into
position. Inspect cables for damage. Replace if necessary.
Interface Locks
The transmitter and the receiver can be locked to prevent accidental or
unauthorized changes. If a locked control is accessed, the lock icon on the
display will flash. Follow the instructions to unlock the receiver or
transmitter.
Firmware Mismatch
Paired transmitters and receivers must have the same firmware version
installed to ensure consistent operation. See Firmware Updates topic for
firmware update procedure.
Encryption Mismatch
Indicates an encryption key mismatch has been detected. Perform an IR sync
between the receiver and transmitter to clear the error.
37/57
Shure Incorporated
Custom Group IR Sync
When using Custom Groups, always perform an IR sync from the CustomGroups menu
in the receiver to ensure accurate display of group and channel information.
See CustomGroups topic for additional details.
Radio Frequency (RF)
The blue RF LED will illuminate when a linked transmitter is within range of
the receiver. Measure the transmitter range before a performance to avoid
operating beyond the specified transmitter range.
The RF meter bars indicate amount of RF power being received. This signal
could be from the transmitter, or it could be from an interfering source, such
as a television broadcast. If the meter shows a signal level when the
transmitter is off, then that channel may have interference. Check the
surrounding area for sources of interference or change the receiver to a clear
frequency.
A red RF LED indicates RF overload. Avoid operating multiple systems in close
proximity.
Frequency Compatibility
Perform a Scan and Sync to ensure the transmitter and receiver are set to the
same channel or frequency Look at the label on the transmitter and receiver to
make sure they are in the same band (G50, J50, L50, etc…).
Reducing Interference
Perform a scan to find the best open frequency. Perform an IR sync to transfer
the settings to the transmitter. For multiple systems, make sure that each
receiver is assigned to a unique channel. Interference will occur if two
transmit-
ters are set to the same channel. Maintain a line of sight between transmitter
and receiver antennas. Move receiver antennas away from metal objects or other
sources of RF interference (such as CD players, computers, digi-
tal effects, network switches, network cables and Personal Stereo Monitor
(PSM) wireless systems). Eliminate RF overload (see below).
Increasing Range
Increase transmitter RF power level to Hi Use an active directional antenna,
antenna distribution system, or other antenna accessory to increase RF range
Eliminating RF Overload
If the RF OL icon appears on the RF meter, try the following: Reduce the
transmitter RF power level from Hi to Lo Move the transmitter further away
from the receiver–at least 6 m (20 ft) If you are using active antennas,
reduce antenna or amplifier gain. Use omnidirectional antennas
Error Codes and Solutions
Error codes are generated when the receiver detects a condition that can
potentially affect system performance. If an error is displayed on the
receiver, use the following table to identify the problem and find the
corresponding solution.
38/57
Shure Incorporated
Error Code Err.001 Err.002
Err.003
Err.004
Err.005 Err.006
Description
Solutions
Audio Compatibility
Update transmitter and receiver firmware to the latest version.
Encryption Mismatch Between Shure Product Lines
Set encryption to off for components from different Shure products lines, such as QLX-D and ULX-D.
Encryption Mode Mismatch
Perform an IR sync between the transmitter and receiver to clear the error.
Band Mismatch
Receiver and transmitter are operating in overlapping frequencies from different bands.
Frequency Mismatch
Receiver and transmitter are from bands that do not share compatible frequencies.
No Frequencies Found
Rescan, select a different group, or use WWB to find a frequency.
Err.007 Firmware Version Self-Test Failed
Receivers: Use the Shure Update Utility to update the receiver to the latest
firmware. If the error persists, contact Shure support.
Transmitters: Update the transmitter firmware again using the QLXD4 receiver.
Be sure to hold the transmitter steady until it reaches 100% on the receiver
display. If the error persists, contact Shure support.
Err.008 Err.009
Shure SB900 Battery Runtime Does Not Appear on Display
Transmitter Type Mismatch
Check that battery is firmly installed into the battery compartment. If
condition persists, replace the battery.
To complete the firmware update, match the type of transmitter to the type of
firmware the receiver currently has.
HHBP = handheld or bodypack firmware BNGN = gooseneck or boundary firmware
Err.010 Battery Hot (Warning) Err.011 Battery Hot Shutdown
Remove the transmitter from any possible external heat sources. Let the device
cool itself down. Consider swapping the battery to continue operation. All
batteries should be stored and operated away from external heat sources in
reasonable temperature conditions for best performance. If the condition
persists, contact Shure support.
Let the device cool itself down and then consider swapping Swap the battery to
continue operation. All batteries should be stored and operated away from
external heat sources in reasonable temperature conditions for best
performance. Identify any possible external heat sources to the transmitter
and operate the transmitter away from those external heat sources.
39/57
Error Code
Description
Shure Incorporated
Solutions If the condition persists, contact Shure support.
Contact Customer Support
Didn’t find what you need? Contact our customer support to get help.
Accessories
Optional Accessories
Batteries and Chargers
Shure Lithium-Ion Rechargeable Battery.Shure LithiumSB900B
Ion Rechargeable Battery
8-Bay Shure Battery Charger
SBC800-US
Dual Docking Charger With PS45US Power Supply
SBC200-US
Dual Docking Charger, Power Supply Not Included
SBC200
2-Bay networked docking charger
SBC220
Single Battery Charger
SBC100
Axient Charging Module
SBC-AX
2-Bay Portable Battery Charger With PS50US Power Supply
SBC210
Power a SB900-compatible bodypack with an AC power SBC-DC
supply instead of batteries
UHF Antenna Power Distribution Amplifiers
UHF Wideband Antenna Distributor w/o Power Cables UHF Antenna Power Distribution System UHF Antenna Power Distribution System UHF Antenna Power Distribution System UHF Antenna Power Distribution System
UA844SWB/LC UA844SWB/LC-AR UA844SWB/LC-BR UA844SWB/LC-AZ UA844SWB/LC-C
40/57
UHF Antenna Power Distribution System UHF Antenna Power Distribution Amplifier UHF Antenna Power Distribution Amplifier UHF Antenna Power Distribution Amplifier
UA844SWB/LC-E UA844SWB/LC-J UA844SWB/LC-K UA844SWB/LC-UK
UABIAST
In-Line Power Supply
UABIAST-US UABIAST-UK UABIAST-BR UABIAST-AR UABIAST-E UABIAST-CHN UABIAST-K UABIAST-J UABIAST-AZ UABIAST-TW
In-Line Amplifiers and Antennas
In-Line Antenna Amplifier, 174-216 MHz In-Line Antenna Amplifier, 470-902 MHz In-Line Antenna Amplifier, 902-960 MHz Active Directional Antenna 470-790MHZ Active Directional Antenna 470-698MHZ Active Directional Antenna 470-900MHZ Active Directional Antenna 925-952MHZ Passive Directional Antenna 470-952 MHz. Includes 10 foot BNC to BNC cable. Passive Directional Antenna 944-952 MHz Wideband Omnidirectional Antenna (470-1100 MHz) Passive Antenna/Splitter Combiner Kit (recommended for 2 receivers)
UA834V UA834WB UA834XA UA874E UA874US UA874WB UA874X
PA805SWB
PA805X UA860SWB
UA221
Shure Incorporated 41/57
Front Mount Antenna Kit (Includes 2 Cables And 2 Bulk- UA600 head)
1/2 Wave Antenna Remote Mount Kit
UA505
PWS Helical Antenna, 480-900 MHz
HA-8089
Helical Antenna, 944-954 MHz
HA-8241
Cables and Connectors
2 ft. BNC-BNC Coaxial Cable
UA802
6 foot (1.8m) BNC to BNC Coaxial Cable for Remote An- UA806 tenna Mounting for ULX Wireless System
25 ft. BNC-BNC Coaxial Cable
UA825
50 ft. BNC-BNC Coaxial Cable
UA850
100 ft. BNC-BNC Coaxial Cable
UA8100
Ethernet Jumper Cable, 8″
C8006
Ethernet Cable, 3′
C803
Ethernet Cable, 10′
C810
Ethernet Cable, Ruggedized 100′
C8100
Ethernet Cable, Ruggedized 25′
C825
Ethernet Cable, Ruggedized 50′
C850
1/2 Wave Omnidirectional Receiver Antennas
470-542 MHz 500-560 MHz 518-598 MHz 554-638 MHz 596-698 MHz 670-742 MHz 690-746 MHz 694-758 MHz 710-790 MHz 740-814 MHz
UA8-470-542 UA8-500-560 UA8-518-598 UA8-554-638 UA8-596-698 UA8-670-742 UA8-690-746 UA8-694-758 UA8-710-790 UA8-740-814
Shure Incorporated 42/57
750-822 MHz 774-865 MHz 00-1000 MHz
UA8-750-822 UA8-774-865 UA8-900-1000
Hardware, Cases, and Accessories
Carrying Case
WA610
Mute Switch for Shure Handheld Transmitters
UAMS/BK
Cable, Instrument, 2.5 foot (.75 m), 4 Pin Mini Connector WA302
(TA4F) to 1/4-inch Connector.
Cable, Instrument, 2-foot (0.7m), 4-pin Mini Connector (TA4F) with Right-Angle 1/4-inch Connector, used with Shure Wireless Bodypack Transmitters
WA304
Premium Guitar Cable TQG Threaded Connector
WA305
Premium Guitar Cable TQG Latching Connector
WA306
Cable, Microphone, 4-foot (1.3m), 4-pin Mini Connector (TA4F) to XLR Connector (F), used with Shure Bodypack Transmitters.
WA310
In-Line On/Off Switch
WA360
In-Line Bodypack Mute Switch
WA661
Wireless Microphone Clip
WA371
Neoprene bodypack arm pouch for all Shure bodypack transmitters
WA620
Shure Incorporated
Specifications
RF Carrier Frequency Range
470937.5 MHz, varies by region (See Frequency Range and Output Power table)
Working Range
100 m ( 328 ft) Note: Actual range depends on RF signal absorption, reflection
and interference.Note: Actual range depends on RF signal absorption,
reflection and interference.
RF Tuning Step Size
25 kHz, varies by region
43/57
Shure Incorporated
Image Rejection
70 dB, typical
RF Sensitivity
-97 dBm at 10-5 BER
Latency
<2.9 ms
Audio Frequency Response
QLXD1
20 20 kHz (±1 dB)
QLXD2
Note: Dependent on microphone type
Audio Dynamic Range
System Gain @ +10
120 dB, A-weighted, typical
Total Harmonic Distortion
-12 dBFS input, System Gain @ +10
<0.1%
System Audio Polarity
Positive pressure on microphone diaphragm produces positive voltage on pin 2
(with respect to pin 3 of XLR output) and the tip of the 6.35 mm (1/4-inch)
output.
Operating Temperature Range
-18°C (0°F) to 50°C (122°F)
Note: Battery characteristics may limit this range.
Storage Temperature Range
-29°C (-20°F) to 74°C (165°F)
Note: Battery characteristics may limit this range.
Battery Life
QLXD
470 to 865 902 to 928 174 to 216 1240 to 1800
SB900B 1/10 mW >8:55 hours >7:58 hours >8:55 hours >7:30 hours
alkaline 1/10 mW 8 hours >6 hours >8:30 hours >6 hours
The values in this table are typical of fresh, high quality batteries. Battery runtime varies depending on the manufacturer and age of the battery.
44/57
QLXD4
Dimensions
41 mm x 197 mm x 151 mm (1.63 in. x 7.75 in. x 5.94 in.), H x W x D
Weight
777 g (1.71 lbs), without antennas
Housing
steel
Power Requirements
12 V DC @ 0.4 A, supplied by external power supply (tip positive)
RF Input
Spurious Rejection
80 dB, typical
Connector Type
BNC
Impedance
50
Audio Output
Gain Adjustment Range
-18 to +42 dB in 1 dB steps
Configuration
1/4″ (6.35 mm)
XLR
Impedance
1/4″ (6.35 mm)
XLR
Full Scale Output
1/4″ (6.35 mm)
XLR
Mic/Line Switch
30 dB pad
Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground) balanced
(1=ground, 2=audio +, 3=audio -)
100 (50 Unbalanced) 100
+12 dBV LINE setting= +18 dBV, MIC setting= -12 dBV
Shure Incorporated 45/57
Phantom Power Protection
1/4″ (6.35 mm)
Yes
XLR
Yes
Networking
Network Interface
Single Port Ethernet 10/100 Mbps
Network Addressing Capability
DHCP or Manual IP address
Maximum Cable Length
100 m (328 ft)
QLXD1
Mic Offset Range
0 to 21 dB (in 3 dB steps)
Battery Type
Shure SB900B Rechargeable Li-Ion or AA batteries 1.5 V
Dimensions
86 mm x 65 mm x 23 mm (3.38in. x 2.57 in. x 0.92 in.) H x W x D, without
antenna
Weight
138 g (4.9 oz.), without batteries
Housing
Cast aluminum
Audio Input
Connector
4-Pin male mini connector (TA4M), See drawing for details
Configuration
Unbalanced
Impedance
1 M, See drawing for details
Maximum Input Level
1 kHz at 1% THD
8.5 dBV ( 7.5 Vpp)
Preamplifier Equivalent Input Noise (EIN)
System Gain Setting +20
-120 dBV, A-weighted, typical
Shure Incorporated 46/57
RF Output
Connector
SMA
Antenna Type
1/4 wave
Impedance
50
Occupied Bandwidth
<200 kHz
Modulation Type
Shure proprietary digital
Power
1 mW or 10 mW
See Frequency Range and Output Power table, varies by region
QLXD2
Mic Offset Range
0 to 21 dB (in 3 dB steps)
Battery Type
Shure SB900B Rechargeable Li-Ion or AA batteries 1.5 V
Dimensions
269 mm x 51 mm (10.6 in. x 2.0 in.) L x Dia.
Weight
307 g (12.1 oz.), without batteries
Housing
Machined aluminum
Audio Input
Configuration
Unbalanced
Maximum Input Level
1 kHz at 1% THD
145 dB SPL (SM58), typical
Note: Dependent on microphone type
Shure Incorporated 47/57
RF Output
Antenna Type
Integrated Single Band Helical
Occupied Bandwidth
<200 kHz
Modulation Type
Shure proprietary digital
Power
1 mW or 10 mW
See Frequency Range and Output Power table, varies by region
Receiver Output Connectors
Shure Incorporated
TA4M Input Connector Diagram
Ground
Bias Voltage
Audio Input
Ground
48/57
Shure Incorporated
Frequency Range and Transmitter Output Power
Band
Frequency Range ( MHz)
Power ( mW RMS )*
G50
470 to 534
1 / 10
G51
470 to 534
1 / 10
G52
479 to 534
1 / 10
G53
470 to 510
1 / 10
G62
510 to 530
1 / 10
H50
534 to 598
1 / 10
H51
534 to 598
1 / 10
H52
534 to 565
1 / 10
H53
534 to 598
1 / 10
J50
572 to 636
1 / 10
J51
572 to 636
1 / 10
JB
806 to 810
1 / 10
K51
606 to 670
1 / 10
K52
606 to 670
1 / 10
L50
632 to 696
1 / 10
L51
632 to 696
1 / 10
L52
632 to 694
1 / 10
L53
632 to 714
1 / 10
M19
694 to 703 (Thailand)
1 / 10
P51
710 to 782
1 / 10
P52
710 to 782
1 / 10
Q12
748 to 758 (Thailand)
1 / 10
Q51
794 to 806
10
S50
823 to 832, 863 to 865
1 / 10
V50
174 to 216
1 / 10
V51
174 to 216
1 / 10
V52
174 to 210
10
X51
925 -937.5
1 / 10
49/57
Shure Incorporated
Band X52 X53 X54 Z17 Z18 Z19 Z20
Frequency Range ( MHz)
Power ( mW RMS )*
902 to 928 (All Americas except Brazil) 1 / 10
902 to 907.500, 915 to 928 (Brazil)
1 / 10
915 to 928 (Australia)
1 / 10
1492 to 1525
1 / 10
1785 to 1805
1 / 10
1785 to 1800
1 / 10
1790 to 1805
1 / 10
- Power delivered to the antenna port
Note: Frequency bands might not be available for sale or authorized for use in all countries or regions.
For the band Z17 (1492-1525 MHz), it must be used indoors only. For the Band Z19 (1785-1800MHz) used in Australia, per Radio Communications Low Interference Potential Devices Class License 2015; item 30 note C: the system must be operated within the range of 1790-1800MHz when used outdoors. .
Frequencies for European Countries
G51 470-534 MHz
Country Code Code de Pays Codice di paese Código de país Länder-Kürzel
Frequency Range Gamme de frequences Gamme di frequenza Gama de frequencias Frequenzbereich
A, B, BG, CH, CY, CZ, D, DK, EST, F
FIN, GB, GR, H, HR, I, IRL, IS, L, LT
M, N, NL, P, PL, RO, S, SK, SLO, TR
All other countries
- This equipment may be capable of operating on some frequencies not authorized in your region. See Licensing Information.
50/57
Shure Incorporated
H51 534-598 MHz
Country Code Code de Pays Codice di paese Código de país Länder-Kürzel
Frequency Range Gamme de frequences Gamme di frequenza Gama de frequencias Frequenzbereich
A, B, BG, CH, CY, CZ, D, EST
534 – 598 MHz*
F, GB, GR, H, I, IS, L, LT
534 – 598 MHz*
NL, P, PL, S, SK, SLO
534 – 598 MHz*
DK, FIN, M, N
HR, E, IRL, LV, RO, TR
All other countries
- This equipment may be capable of operating on some frequencies not authorized in your region. See Licensing Information.
K51 606-670 MHz
Country Code Code de Pays Codice di paese Código de país Länder-Kürzel
Frequency Range Gamme de frequences Gamme di frequenza Gama de frequencias Frequenzbereich
A, B, BG, CH, CY, CZ, D, EST
606 – 670 MHz*
F, GB, GR, H, I, IS, L, LT
606 – 670 MHz*
NL, P, PL, S, SK, SLO
606 – 670 MHz*
RO
646 – 647; 654 – 655; 662 – 663 MHz*
DK, E, FIN, HR, IRL, LV, M, N, TR
All other countries
- This equipment may be capable of operating on some frequencies not authorized in your region. See Licensing Information.
51/57
Shure Incorporated
L52 632-694 MHz
Country Code Code de Pays Codice di paese Código de país Länder-Kürzel
Frequency Range Gamme de frequences Gamme di frequenza Gama de frequencias Frequenzbereich
A, B, BG, CH, CY, CZ, D, DK, EST, F
FIN, GB, GR, H, HR, I, IRL, IS, L, LT
M, N, NL, P, PL, RO, S, SK, SLO, TR
All other countries
- This equipment may be capable of operating on some frequencies not authorized in your region. See Licensing Information.
P51 710-782 MHz
Country Code Code de Pays Codice di paese Código de país Länder-Kürzel
Frequency Range Gamme de frequences Gamme di frequenza Gama de frequencias Frequenzbereich
A, B, BG, CH, CY, CZ, D, EST, F, GB
710 – 782 MHz*
GR, H, I, IS, L, LT, NL, P, PL, S, SK, SLO
710 – 782 MHz*
718 – 719; 726 – 727; 734 – 743; 750 – 751; 758 – 759 RO
MHz*
DK, E, FIN, HR, IRL, LV, M, N, TR
All other countries
- This equipment may be capable of operating on some frequencies not authorized in your region. See Licensing Information.
52/57
Shure Incorporated
Q51 794-806 MHz
Country Code Code de Pays Codice di paese Código de país Länder-Kürzel
Frequency Range Gamme de frequences Gamme di frequenza Gama de frequencias Frequenzbereich
A, B, BG, CH, CY, CZ, D, DK, E, EST
F, FIN, GB, GR, H, HR, I, IRL, IS, L, LT
LV, M, N, NL, P, PL, S, SK, SLO, TR
All other countries
- This equipment may be capable of operating on some frequencies not authorized in your region. See Licensing Information.
S50 823-832 MHz, 863-865 MHz
Country Code Code de Pays Codice di paese Código de país Länder-Kürzel
Frequency Range Gamme de frequences Gamme di frequenza Gama de frequencias Frequenzbereich
D
license free
A, B, BG, CH, CY, CZ, D, DK, EST, F
FIN, GB, GR, H, HR, I, IRL, IS, L, LT
M, N, NL, P, PL, RO, S, SK, SLO, TR
863 – 865 MHz
EU: license free
All other countries
- This equipment may be capable of operating on some frequencies not authorized in your region. See Licensing Information.
IMPORTANT SAFETY INSTRUCTIONS
1. READ these instructions. 2. KEEP these instructions. 3. HEED all warnings.
53/57
Shure Incorporated
4. FOLLOW all instructions. 5. DO NOT use this apparatus near water. 6. CLEAN
ONLY with dry cloth. 7. DO NOT block any ventilation openings. Allow
sufficient distances for adequate ventilation and install in accordance
with the manufacturer’s instructions. 8. DO NOT install near any heat sources
such as open flames, radiators, heat registers, stoves, or other apparatus
(in-
cluding amplifiers) that produce heat. Do not place any open flame sources on
the product. 9. DO NOT defeat the safety purpose of the polarized or grounding
type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a third
grounding prong. The wider blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet. 10. PROTECT the power cord
from being walked on or pinched, particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus. 11. ONLY USE
attachments/accessories specified by the manufacturer. 12. USE only with a
cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
13. UNPLUG this apparatus during lightning storms or when unused for long
periods of time. 14. REFER all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any
way, such as power supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped. 15. DO NOT expose
the apparatus to dripping and splashing. DO NOT put objects filled with
liquids, such as vases, on the apparatus. 16. The MAINS plug or an appliance
coupler shall remain readily operable. 17. The airborne noise of the Apparatus
does not exceed 70dB (A). 18. Apparatus with CLASS I construction shall be
connected to a MAINS socket outlet with a protective earthing connection. 19.
To reduce the risk of fire or electric shock, do not expose this apparatus to
rain or moisture. 20. Do not attempt to modify this product. Doing so could
result in personal injury and/or product failure. 21. Operate this product
within its specified operating temperature range.
Explanation of Symbols
Caution: risk of electric shock
Caution: risk of danger (See note.)
Direct current
Alternating current
On (Supply)
Equipment protected throughout by DOUBLE INSULATION or REINFORCED INSULATION
Stand-by
Equipment should not be disposed of in the normal waste stream
54/57
Shure Incorporated
WARNING: Voltages in this equipment are hazardous to life. No user-serviceable
parts inside. Refer all servicing to qualified service personnel. The safety
certifications do not apply when the operating voltage is changed from the
factory setting.
WARNING: Danger of explosion if incorrect battery replaced. Operate only with
AA batteries.
Note: Use only with the included power supply or a Shure-approved equivalent.
WARNING
· Battery packs may explode or release toxic materials. Risk of fire or burns.
Do not open, crush, modify, disassemble, heat above 140°F (60°C), or
incinerate.
· Follow instructions from manufacturer · Only use Shure charger to recharge
Shure rechargeable batteries · WARNING: Danger of explosion if battery
incorrectly replaced. Replace only with same or equivalent type. · Never put
batteries in mouth. If swallowed, contact your physician or local poison
control center · Do not short circuit; may cause burns or catch fire · Do not
charge or use battery packs other than Shure rechargeable batteries · Dispose
of battery packs properly. Check with local vendor for proper disposal of used
battery packs. · Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the like · Do not immerse
the battery in liquid such as water, beverages, or other fluids. · Do not
attach or insert battery with polarity reversed. · Keep away from small
children. · Do not use abnormal batteries. · Pack the battery securely for
transport.
Important Product Information
LICENSING INFORMATION
Licensing: A ministerial license to operate this equipment may be required in
certain areas. Consult your national authority for possible requirements.
Changes or modifications not expressly approved by Shure Incorporated could
void your authority to operate the equipment. Licensing of Shure wireless
microphone equipment is the user’s responsibility, and licensability depends
on the user’s classification and application, and on the selected frequency.
Shure strongly urges the user to contact the appropriate telecommunications
authority concerning proper licensing, and before choosing and ordering
frequencies.
Information to the user
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept
any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
· Reorient or relocate the receiving antenna.
55/57
Shure Incorporated
· Increase the separation between the equipment and the receiver. · Connect
the equipment to an outlet on a circuit different from that to which the
receiver is connected. · Consult the dealer or an experienced radio/TV
technician for help.
Note: EMC conformance testing is based on the use of supplied and recommended
cable types. The use of other cable types may degrade EMC performance.
Please follow your regional recycling scheme for batteries, packaging, and
electronic waste.
Australia Warning for Wireless
This device operates under an ACMA class licence and must comply with all the
conditions of that licence including operating frequencies. Before 31 December
2014, this device will comply if it is operated in the 520-820 MHz frequency
band. WARNING: After 31 December 2014, in order to comply, this device must
not be operated in the 694-820 MHz band.
Caution: Avoid operating mobile phones and mobile broadband devices near your
wireless system to prevent the possibility of interference.
Certifications
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference. 2. This device must accept any
interference, including interference that may cause undesired operation of the
device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est
conforme aux CNR d’Innovation, Sciences et Développement économique Canada
applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes :
1. L’appareil ne doit pas produire de brouillage; 2. L’appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est susceptible
d’en compromettre le
fonctionnement.
QLXD1, QLXD2, QLXD4
Meets essential requirements of the following European Directives:
· WEEE Directive 2012/19/EU, as amended by 2008/34/EC · RoHS Directive EU
2015/863
Note: Please follow your regional recycling scheme for batteries and
electronic waste
CE Notice: Hereby, Shure Incorporated declares that this product with CE
Marking has been determined to be in compliance with European Union
requirements. The full text of the EU declaration of conformity is available
at the following site: https:// www.shure.com/en-EU/support/declarations-of-
conformity.
56/57
Shure Incorporated
Authorized European representative: Shure Europe GmbH Department: Global
Compliance Jakob-Dieffenbacher-Str. 12 75031 Eppingen, Germany Phone:
+49-7262-92 49 0 Fax: +49-7262-92 49 11 4 Email: EMEAsupport@shure.de Industry
Canada ICES-003 Compliance Label: CAN ICES-3 (B)/NMB-3(B)
QLXD1, QLXD2
Certified under FCC Part 74. Certified by ISED in Canada under RSS-102 and
RSS-210. IC: 616A-QLXD1G50, 616A-QLXD1H50, 616A-QLXD1J50, 616A-QLXD1L50, 616A-
QLXD2G50, 616A-QLXD2H50, 616AQLXD2J50, 616A-QLXD2L50. FCC: DD4QLXD1G50,
DD4QLXD1H50, DD4QLXD1J50, DD4QLXD1L50, DD4QLXD2G50, DD4QLXD2H50, DD4QLXD2J50,
DD4QLXD2L50. IC: 616A-QLXD1X52, 616A-QLXD2X52 FCC: DD4QLXD1X52, DD4QLXD2X52
IC: 616A-QLXD1V50, 616A-QLXD2V50 FCC: DD4QLXD1V50, DD4QLXD2V50
Note: For transmitters operating in the V50 and V51 bands: nominal free space
antenna gain at middle of the band is typically -6 dBi, and rolls off at the
band edges an additional -4 dB.
QLXD4
Approved under the Declaration of Conformity (DoC) provision of FCC Part 15.
Conforms to electrical safety requirements based on IEC 60065.
57/57
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>