anko Wireless Charger User Guide
- June 7, 2024
- Anko
Table of Contents
anko Wireless Charger
INTRODUCTION
Specification:
- Wireless Charging Pad
- Input: DC 5V/3A, 9V/2A, 12V/1.5A
- Output (wireless): 10W (Max)
To achieve fast wireless charging, a PD 18W or above power adapter is required and your charging device must also supports fast wireless charging function. Power adapter sell separately This wireless charger is compatible with Qi- enabled devices. Able to charge through cases up to 3mm thick.
LED indicator:
- Blue (1s): power is on
- Blue (constant): charging in processing
- Red: charging process completed
- Blue (flashing): protection mode initiated
- Blue-Red (flashing): power input voltage is lower than 4.2V / higher than 13.5V.
User guide:
- Connect the micro USB plug to the micro USB port on the wireless charging pad.
- Connect the USB-C plug into power adapter.
- Plug the power adapter into wall socket.
- Put down your phone & charge.
Cautions:
In emergency cases, please unplug the electric socket: Emergency cases include
- Smoke from the unit
- Changed shape
- Liquid or material leakage
- Dropped & broken casing or parts.
- The charger is used for office equipment and information technology equipment.
- The max ambient temperature is 40 °C.
- For indoor use only.
- Do not drop the product or submit it to impact.
- Dropping the product or submitting it to impact can cause the product to malfunction.
- Do not place the product in an area exposed to heat, direct sunlight, dampness, moisture, rain, vibration, shock, dust or sand.
- Do not place the product near any kind of magnet or expose it to excessive vibration.
- Do not drop the main body, accessories or submit them to any impact, as this can cause the product to malfunction.
- When the plug is used as disconnect device, the socket-outlet shall be installed near the equipment and shall be easily accessible.
12 Month Warranty
Thank you for your purchase from Kmart.
Kmart Australia Ltd Warrants your new product to be free from defects in
materials and workmanship for the period stated above, form the date of
purchase, provided
that the product is used in accordance with accompanying recommendations or
instructions where provided. This warranty is in addition to rights under the
Australian Consumer Law.
Kmart will provide you with your choice of refund, repair or exchange (where
possible) for this product if it becomes defective within the warranty period.
Kmart will bear
the reasonable expense of claiming the warranty. This warranty will no longer
apply where the defect is a result of alteration, accident, misuse, abuse or
neglect. Please retain your receipt as proof of purchase and contact our
Customer Service Centre on 1800 124 125 (Australia) or 0800 945 995 (New
Zealand) or alternatively, via Customer Help at Kmart.com.au for any be
addressed to our Customer Service Centre at 690 Springvale Rd, Mulgrave Vic
3170. Our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for a
major failure and compensation for any other reasonably fail to be of
acceptable quality and the failure does not amount to a major failure. For New
Zealand customers, this warranty is in addition to statutory rights observed
under New Zealand legislation. 