TOTO CT7631CEMFG Washlet G5A Bidet Toilet Installation Guide
- August 29, 2024
- TOTO
Table of Contents
TOTO CT7631CEMFG Washlet G5A Bidet Toilet
- Product Name: CT7631CEMFG Toilet Bowl Unit
- Water Supply: 1/2 NPT
- Manual Water Supply Knob: Orange knob for water supply during power outages
- Dimensions:
- Water Supply from Wall: 11-13/16″ (300 mm)
- Water Supply from Floor: 11-13/16″ (300 mm)
- Floor Flange: 12″ (305 mm)
Product Usage Instructions
Safety Cautions
Before starting the installation, read and observe the safety cautions
provided in the manual to prevent injury or property damage.
Precaution Before Installation
Ensure the water supply is 1/2 NPT and follow the specified measurements for
wall and floor water supply. Before installation, clean the water supply pipe
thoroughly to remove any dirt or debris.
Manual Water Supply Knob Usage
The orange manual water supply knob is designed for use during power outages
to supply water to the toilet bowl. Do not rotate or use the knob during
installation to avoid continuous water flow into the bowl during testing.
FAQ:
Q: What should I do if the water supply hose breaks?
A: If the water supply hose breaks, immediately turn off the water supply
valve to prevent leaks that may damage property. Replace the broken hose with
a new one.
For installers
Manual water supply knob (orange)
The manual water supply knob is a handle for the water supply to be used in the event of a power outage.
See the reverse side for the installation manual
*The product may be slightly different in shape than the product shown in
the figure depending on the model. /
CT7631CEMFG TOILET BOWL UNIT
Perform the installation work properly according to this Installation instruction so that the product can function well. After installation, fully explain how to use it to your customer.
Safety Cautions
(Observe these cautions for safety’s sake)
- Read these “Safety Cautions” carefully before starting installation work. Install the product properly.
- This manual uses various indications to ensure a proper, safe installation and to prevent injury to the customer,injury to other people and damage to property.
- The symbols should be interpreted as follows.
- Caution Improper use or installation of this product may result in injury or property damage.
- This symbol is used to indicate no tampering with this product.
- This symbol is used to indicate a required step in the use of this product.
Caution
-
Do not subject the toilet bowl to strong forces or impacts
-
Otherwise, the toilet bowl may break causing injury or leaks that may damage property.
-
Do not excessively bend or twist the water supply hose
-
Otherwise, the flexible water supply hose may break causing leaks that may damage property.
-
Do not remove the water supply filter with the water supply valve open
-
If the water supply valve is not closed, water may gush out causing leaks that may damage property.
Prohibited -
Do not install in a humid place such as a bathroom
-
Doing so may result in fire, electrical shock, heat, or a short circuit.
-
Be sure to use the included or specified parts for installation work
-
Otherwise, the product may not be installed properly.
-
Carry out the installation work according to this installation manual
Required -
Otherwise, damage caused by water leaks may occur.
Precaution before installation
Make sure before installation that the water supply source and water drain
pipe are in the specified positions according to the diagram.
If it is not positioned properly, the product may not be able to be installed
correctly.
- Exercise care to ensure that metal objects (wristwatch bands, belt buckles, etc.) do not come into contact with the ceramic during installation, transport, or cleaning.
- Such objects could rub the surface of the ceramic and leave stripe marks.
- Secure the space required for toilet installation and at the same time, check door opening/closing for possible interference. The remote control signal reception may be degraded and the merchandise unit may not respond to the remote control if there are shelves or cabinets on the rear wall at a height of less than 55-1/8 ″ (1400 mm) from the floor.
- (Shelves and storage cabinets should be more than 55-1/8 ″ (1400 mm) from the floor.)
- For water supply pressure is a minimum required water pressure of 0.05 MPa (at 10 L/min flowing) and a maximum water pressure of 0.75 MPa (at resting).
- Please use within this pressure range.
- Turn on the electricity and water supply to the product after completing all installation work.
- The manual water supply knob is a handle for water supply to be used in the event of a power outage.
- Do not use (do not rotate) it during installation.
- Doing so may cause water to continue to flow into the toilet bowl during test operation.
- Before installing the product, be sure to completely wash out any dirt, sand, etc. from inside the water supply pipe.
Included parts
- Refer to the following and confirm that no parts are missing.
- The product may be slightly different in shape than the product shown in the figure depending on the model.
Part diagram
*The floor flange, Nut, Washer, T-bolt and wax ringare not included.
Installation video
Installation procedure
https://vimeo.com/871606326?share=copy
- Communication fees apply.
- The video may not be viewable in some environments.
Installation procedure
This manual uses illustrations of a wall water supply for explanatory purposes
Caution
Be sure to install the shutoff valve with filter (B-1) included with the
toilet. Dirt contamination could cause shutoff or discharge defects.
Confirm the angle of the shutoff valve (B-1) prior to installation.
Caution
- Install the shutoff valve (B-1) at a specified angle.
- Installation in the wrong direction could cause flushing defects or water leaks.
Required
After the test run, check that there is no water leakage from the connection
Insufficient installation may result in property damage such as water leakage
and wet household goods.
Wrap the sealing tape around the threaded part and attach it
-
- Pay attention to the direction of the shutoff valve with filter (B-1) when installing it
Installation procedure
-
Set so that the wax ring does not enter the drainage channel area (in the hatched area).
-
Doing otherwise may cause inadequate flushing. /
-
Securely fit the head of C-3 into the hexagonal hole of C-1.
-
If it is not inserted completely, the toilet bowl may be unstable. /
Install the top unit according to Installation Manual included with the top unit. /
Install aligned with the toilet bow(l A-1) upper surface and toilet bow(l A-1) side surface, so that there are no noticeable gaps with the toilet bow(l A-1). /
- Press down firmly on the hook-and-loop fasteners (4 places) and confirm that A-2 and A-3 does not become detached.
- Route the water supply hose so that it does not interfere with A-2.
- When routing the water supply hose, be careful not to kink the water supply hose.
- After the trial-run (flush) of the toilet bowl, check the toilet bowl(A-1)inside for foreign matter such as chips of cut pipe, etc.
- Foreign matters such as transmitted rust can stick to the sides.
- Make sure that there are no scratches or other damage on the surface.
- If the toilet bowl surface is tightly pressed or rubbed against metals (watchbands, belt buckles, etc.), black or silver streak marks may be left on the surface.
- After installation, unseen dirt (oil or adhesive for piping) may remain in the toilet bowl(A-1).
- Be sure to wipe it off using a non-abrasive neutral detergent for toilets.
- Otherwise, the toilet bowl(A-1) surface may not flush completely clean.
- After conducting a test run,confirm that no connections are leaking water.
- Not installing the bowl properly may cause water leaks that could result in flooding damage to property, such as household belongings.
- After test operation, make sure to clean the water filter with the shutoff valve closed.
- Remove the water supply filter using the open and close tool included with the functional part, and clean the water supply filter.
- Make sure to open the shutoff valve after cleaning the filter.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>