tp-link RE190 Range Extender Installation Guide

tp-link RE190 Range Extender

Specifications

• Product: Range Extender
• Manufacturer: TP-Link
• Power LED Indicator
• WPS Button for Easy Setup
• Tether App Support
• Supports Extending Wi-Fi Range

Product Usage Instructions

Power On
Plug the extender into a power outlet next to your router. Wait until its Power LED turns solid on.

Set Up

Method 1: Via the WPS Button

1. Activate the WPS function on your router.
2. Press the WPS button on the extender within 2 minutes of activating WPS on the router.
3. Once the LED turns solid on, the connection is successful.

Method 2: Via the Tether App

1. Download and install the Tether app from the respective app store.
2. Follow the app instructions to connect the extender to your network.

Method 3: Via a Web Browser

1. Connect to the extender’s network using a web browser.
2. Create a password to log in and follow on-screen instructions to complete setup.

Relocate

1. Place the extender halfway between your router and the Wi-Fi dead zone.
2. Wait for the LED to turn solid blue, indicating a suitable location.

Access Extender Settings:
After setup, access extender settings via Tether app, web browser, or scan the QR code provided with the product for optimal Wi-Fi performance adjustments.

FAQ

• Q1: What should I do if I cannot find my device during setup?
  If you cannot find your device, please refer to the troubleshooting section in the user manual or contact customer support for assistance.

• Q2: What should I do if the LED does not turn solid on after setup?
  If the LED does not indicate a successful connection, please check your network settings, router compatibility, and try setting up again following the provided methods.

Quick Installation Guide
Range Extender

Setup with videos
Scan the QR code, or visit
https://www.tp-link.com/support/setup-video/#range-extenders and search for the setup video of your model.

• Images may differ from your actual product.

Power On

Plug the extender into a power outlet next to your router. Wait until its Power LED turns solid on.
Note: For safety, only plug the extender in the direction as shown below.

Set Up

Method 1: Via the WPS Button

1. Activate the WPS function on your router by pressing the WPS button.
   Note : If you don’t know how to do it, refer to your router’s user manual, or you can use other methods to set it up.

2. Within 2 minutes, press the WPS button on the extender for 1 second. The LED should change from blinking to solid on, indicating a successful connection.

3. Done. You can connect to the extender’s Wi-Fi.

Extended Network Names:
Router’s network name with _EXT at the end
or
Same as your EasyMesh router (see back for EasyMesh details)
Passwords:
Same as your router

Method 2: Via the Tether App

1. Get the up-to-date Tether app from the Apple App Store or Google Play, or simply scan the QR code.

2. Launch the Tether app and log in with your TP-Link ID. If you don’t have an account, create one first.

3. Tap the button and select Range Extender.
   Notes:

4. If you cannot find your device, please refer to FAQ > Q1.

5. Due to Tether app updates, your actual user interface and pathway may differ from those depicted here.

6. Follow app instructions to complete the setup. The LED should turn solid on, indicating successful connection to your router.

Note: If the LED does not turn solid on, please refer to FAQ > Q2.

Method 3: Via a Web Browser

1. Connect your computer or smartphone to the extender’s network TP-Link_Extender.
2. Visit http://www.tplinkrepeater.net or http://192.168.0.254 in a web browser. Create a password to log in.
3. Follow web instructions to complete the setup.

Relocate

1. Plug in the extender about halfway between your router and the Wi-Fi dead zone. The location you choose must be within the range of your router.
2. Wait for about 2 minutes until the LED turns solid blue. If it doesn’t, relocate the extender closer to the router to achieve better signal quality.

Tip: To place the extender for optimal Wi-Fi performance, access extender settings via the Tether app and go to Tools > Location Assistant, or simply scan the QR code to visit https://www.tp-link.com/support/faq/3103/ .

Access Extender Settings

After setup, you can access extender settings via any of the methods below. You can reselect the main network, change extended network settings, and more.

Note: If your extender and router use the same network name, Method 1 is recommended.

Method 1: Via the Tether App

1. Connect your smartphone to the extender‘s or router’s network.
2. Launch the Tether app, select your extender, and log in.
3. View or change extender settings as needed.

Method 2: Via a Web Browser

1. Connect your computer or smartphone to the extender’s network. If you are using a computer, unplug the Ethernet cable if any.
2. Launch a web browser, enter http://www.tplinkrepeater.net in the address bar, and log in.
3. View or change extender settings as needed.

LED Explanation

network of your mian router.
2.4GHz| On/Off| The extender is connected or not connected to the 2.4GHz wireless network of your main router.
| Solid blue Solid red Off| The extender is connected to your router’s wireless network and is in a suitable location.

The extender is experiencing poor signal strength. Try relocating it closer to your router.

No wireless connection is established.

| On/Off

Blinking

| The extender is on or off.

The system is starting up or firmware is being

upgraded.

| On Blinking Off| WPS connection is established. WPS connection is in progress.

WPS connection has been established for more than 5 minutes or WPS connection failed.

EasyMesh-Compatible
You can experience strong, stable, and seamless wireless connections throughout your home with EasyMesh, a whole home mesh standard that works across different access points for ultimate flexibility.

Seamless Roaming
Connects mobile devices to your routers or extenders that provide the best coverage. Devices compatible with EasyMesh also share a single Wi-Fi name so you stay connected in every room.
One-Click Settings
Within 2 minutes, press the WPS button on the main router and the extender, then the EasyMesh network is all set up.
Flexible Scalability
Flexibly scale your home networking with different vendors,* different topologies, different Protocols and different product categories.

*TP-Link EasyMesh-compatible products can network with other devices that use EasyMesh. Failed connections may be due to firmware conflicts of different vendors. The
EasyMesh-Compatible function is still being developed on some models and will be supported in subsequent software updates.
This product is compatible with standardized EasyMesh technology but has not obtained the Wi-Fi EasyMeshTM certification.

For more information, visit https://www.tp-link.com/easymesh/.

FAQ (Frequently Asked Questions)

1. Q1. What should I do if the Tether app cannot find my device during setup?
   Try another method by following the steps below:

2. Connect your smartphone to the extender’s network TP-Link_Extender.

3. Launch the Tether app, and select your extender.
   Tip : If you have connected to the extender’s Wi-Fi but still cannot find your device, try turning off your cellular data.

4. Follow app instructions to complete the setup.
   If you are still having problems, contact our technical support.

5. Q2. What should I do if the LED doesn’t turn solid on after completing setup via the Tether app or web browser?

   • You may have entered incorrect Wi-Fi password for your main router during the configuration. Check the password and try again.
   • Make sure the extender is close to your router, preferably within 16 feet, and away from large electrical appliances.
   • If you have enabled wireless MAC filtering, wireless access control, or access control list (ACL) on your router, disable them first, then follow any method on the front page to complete the configuration.
   • Try setting it up via the WPS button.
   • Reset the extender and go through the configuration again.
     If you are still having problems, contact our technical support.

6. Q3. How do I reset the extender?

   • With the extender powered on, use a pin to press the RESET button for 1 second. The extender will reboot.

If you need more setup help, please visit https://www.tp- link.com/support/faq/3074/, or simply scan the QR code.

Safety Information

• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use the device where wireless devices are not allowed.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU) 2015/863. The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017.
The original UK Declaration of Conformity may be found at https://www.tp- link.com/support/ukca

For technical support, replacement services, user manuals and other information, please visit https://www.tp-link.com/support , or simply scan the QR code.

AC750 Wi-Fi Range Extender (RE190)

References

• Trying to Configure the Range Extender? | TP-Link
• EasyMesh & EasyMesh-Compatible Devices | TP-Link
• CE Regulatory Compliance | TP-Link
• TP-Link Product Support - Wireless Networking Equipment Support
• Range Extender Setup Help | TP-Link
• How to place your wireless Range Extender for optimal reception and performance | TP-Link
• Support Videos | TP-Link
• Regulatory Compliance | TP-Link

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>