ZEISS A6 Injector IOL Injector portfolio Instructions

August 28, 2024
Zeiss

ZEISS - logo A6 Injector Set
Handling instructions for
non-preloaded ZEISS MICS IOLs

A6 Injector IOL Injector portfolio

Fill the barrel halfway with viscoelastic substance. Put two lines of viscoelastics to the plane of the cartridge. Do not touch the tip of the cartridge.

Pull the lens gently from its holder using a forceps with fine tips. Do not let the IOL dry up. Do not use the fluid from the bottle for ocular irrigation.

Place the lens in the center of the opened cartridge.

Hold optic down, center the IOL on the loading deck of the cartridge. Close the cartridge without clamping the lens.

Control the position of the lens within the channel of the closed cartridge. Haptic must move freely.

Injector A6 with groove for introduction of the Cartridge.

Push the loaded cartridge from the front into the groove until stop position.

Lock cartridge by holding the tip and rotating the injector.

Gently push plunger forward and check regular and continuous forward movement of the lens.

Please refer to www.zeiss.com/injectors for diopter ranges applicable for each MICS IOL.

ZEISS A6 Injector IOL Injector portfolio - fig9

0120
A6 Injector Set
MDJ SAS
ZI Racine Palladuc
63650 La Monnerie Le Montel
France
en-OUS_32_022_0173I CZ-XI/2023 International edition: Only for sale in selected countries.
The contents of the brochure may differ from the current status of approval of the product or service offering in your country. Please contact our regional representatives for more information.
Subject to changes in design and scope of delivery and due to ongoing technical development. A6 injector is a trademark of MDJ (0120).
© Carl Zeiss Meditec AG, 2023. All rights reserved.

ZEISS - logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals