ZEISS 0482 VISCOJECT-BIO 2.2 Injector Set Installation Guide
- June 2, 2024
- Zeiss
Table of Contents
ZEISS 0482 VISCOJECT-BIO 2.2 Injector Set
Product Information
Specifications
- Product Name: VISCOJECT-BIO 2.2 Injector Set
- Manufacturer: Medicel AG
- Model: 0482
- Country of Origin: Switzerland
- Recommended OVD: ZEISS OVDs
Product Usage Instructions
Preparation:
Place a small amount of OVD in the cartridge tip. Place a line of OVD in
each channel of the cartridge. Avoid touching the tip of the cartridge.
Lens Placement:
Center the lens in the open cartridge. Press down on the edges of the optic to
ensure the haptics are under the ledges of the cartridge.
Special IOLs:
For toric and multifocal IOLs, pay attention to the orientation holes and
meridian marks for correct positioning.
Cartridge Folding:
Use folding forceps to hold the IOL in place while folding the cartridge.
Close the cartridge until you hear a click.
Injector Set-Up:
Insert the cartridge into the injector and push it forward fully. The lens is
now ready for implantation. Ensure the bevelled edge is downward, then gently
push the plunger to inject the IOL.
Frequently Asked Questions (FAQ):
-
Q: Can I use any OVD with the VISCOJECT-BIO 2.2 Injector Set?
A: It is recommended to use ZEISS OVDs with this injector set for optimal performance and compatibility. -
Q: How do I know if the IOL is correctly positioned in the cartridge?
A: Ensure that the optic haptics are positioned under the ledges of the cartridge and that any orientation holes or meridian marks are aligned properly for specific IOL types.
HOW TO USE
- Place a small amount of OVD* in the cartridge tip. Place a line of OVD in each channel of the cartridge. Do not touch the tip of the cartridge.
- Place the lens in the center of the open cartridge. Push down on the edges of the optic to ensure that the optic haptics are positioned under the ledges of the cartridge.
- For toric and multifocal IOLs, mind the orientation holes and the meridian marks.
- Maintain the IOL in place with the folding forceps while folding the cartridge. Close the cartridge until you hear a click.
- Place the cartridge into the injector and move it forward as far as it will go. The lens is ready for implantation.
- Place the bevelled edge downward and gently push the plunger to inject the IOL.
Medicel AG
Dornierstrasse 11
9423 Altenrhein
Switzerland
www.zeiss.com/injectors
www.zeiss.com/med/contacts
en-OUS_32_022_0179I CZ-II/2024 International edition: Only for sale in
selected countries.
The contents of the brochure may differ from the current status of approval of
the product or service offering in your country. Please contact our regional
representatives for more information. Subject to changes in design and scope
of delivery and due to ongoing technical development. VISCOJECT is a trademark
of Medicel.
© Carl Zeiss Meditec AG, 2024. All rights reserved.