JBL CLIP5 Clip 5 Portable BT Speaker User Guide
- August 28, 2024
- JBL
Table of Contents
JBL CLIP5 Clip 5 Portable BT Speaker
Specifications
- Transducer: 45 mm / 1.75″
- Output power: 7 W RMS
- Signal-to-noise ratio: > 85 dB
- Battery type: Lithium-ion polymer 5.32 Wh (equivalent to 3.8 V / 1400 mAh)
- Battery charge time: 3 hours (5 V / 1 A)
- Music playtime: up to 12 hours (varies by volume level and audio content)
- Power: 10 dBm (EIRP)
- Modulation: GFSK, π/4 DQPSK, 8DPSK
- Product dimensions (W x H x D): 86.30 x 134.50 x 46.0 mm / 3.4 x 5.3 x 1.8″
- Net weight: 0.285 kg / 0.628 lbs
- Packaging dimensions (W x H x D): 100.5 x 148 x 59 mm / 3.9 x 5.8 x 2.3″
- Gross weight: 0.39 kg / 0.86 lbs
- Maximum operation temperature: To protect battery lifespan, fully charge at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions.
WHAT IS IN THE BOX
Product Usage Instructions
Bluetooth Pairing
- Turn on the JBL Clip 5 by pressing the power button.
- Access the Bluetooth settings on your device and search for available devices.
- Select “JBL Clip 5” from the list of available devices to pair.
PLAY
Multi-Speaker Connection
- Ensure both speakers are turned on.
- Access the JBL PORTABLE app on your device for speaker configuration.
APP
Charging Use the provided charging cable to connect the JBL Clip 5 to a power source for charging when the battery is low.
Carabiner The JBL Clip 5 comes with a carabiner for easy attachment to bags or belts.
Waterproof & Dustproof (IP67)The JBL Clip 5 is designed to withstand water and dust exposure according to IP67 standards. However, do not expose the speaker to liquids while charging or submerge it in water for extended periods.
Factory Reset To perform a factory reset, press and hold the reset button for more than 2 seconds.
TECH SPEC
-
Transducer: 45 mm / 1.75″
-
Output power: 7 W RMS
-
Frequency response: 95 Hz – 20 kHz
-
Signal-to-noise ratio: > 85 dB
-
Battery type: Lithium-ion polymer 5.32 Wh (equivqlent to 3.8 V / 1400 mAh)
-
Battery charge time: 3 hours (5 V / 1 A)
-
Music playtime: up to 12 hours (varies by volume level and audio content)
-
Bluetooth® version: 5.3
-
Bluetooth® profile: A2DP V1.4, AVRCP V1.6
-
Bluetooth® transmitter
-
frequency range: 2400 – 2483.5 MHz
-
Bluetooth® transmitter
-
power: ≤ 10 dBm (EIRP)
Bluetooth® transmitter -
modulation: GFSK, π/4 DQPSK, 8DPSK
-
Product dimensions (W x H x D): 86.30 x 134.50 x 46.0 mm / 3.4″ x 5.3″ x 1.8″
-
Net weight: 0.285 kg / 0.628 lbs
-
Packaging dimensions (W x H x D): 100.5 x 148 x 59 mm / 3.9″ x 5.8″ x 2.3″
-
Gross weight: 0.39 kg / 0.86 lbs
-
Maximum operation temperature: 45 °C
WARNING
- To protect battery lifespan, fully charge at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions.
- Do not expose the JBL Clip 5 to liquids without removing cable connection. Do not expose JBL Clip 5 to water while charging.
- It may result in permanent damage to the speaker or power source.
- Chemicals, salt or “foreign particles” in your pool or the ocean can damage the waterproof seals or harm the connector surface over time if not rinsed off after use. After a liquid spill or rinse, do not charge your speaker until it’s completely dry and clean.
- Charging when wet might damage your speaker.
- When using an external adapter, the output voltage/current of the external adapter should not exceed 5V/3A.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
Frequently Asked Questions
Q: How long does it take to fully charge the JBL Clip 5?
A: The JBL Clip 5 requires approximately 3 hours to fully charge with a
5V/1A power source.
Q: What is the maximum music playtime of the JBL Clip 5?
A: The JBL Clip 5 can play music for up to 12 hours, but actual playtime
may vary based on volume levels and audio content.
Q: Can I connect multiple JBL Clip 5 speakers together?
A: Yes, you can connect multiple JBL Clip 5 speakers using the JBL PORTABLE
app for a synchronized audio experience.
Q: Is the JBL Clip 5 waterproof?
A: Yes, the JBL Clip 5 is waterproof and dustproof with an IP67 rating, but
precautions should be taken to avoid water damage while charging.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>