b mobile 10 049 Mobile Phone User Guide

: August 26, 2024
: b mobile

Table of Contents

b mobile 10 049 Mobile Phone
General Information
Getting Started
Connecting to the Network
Main menu
Multimedia
Message
Tools
Settings
Apps & Games
FAQ
Read User Manual Online (PDF format)
Download This Manual (PDF format)

b mobile 10 049 Mobile Phone

Manual Statements
2014. Thank you for selecting our mobile phone. This user guide will provide you with the general information and operation instructions.

Note:

Use only accessories approved by the phone manufacturer to ensure safety. Failing to comply with this will violate the terms and conditions of the warranty.
If the contents and displays described in this user guide do not match the actual operation of the phone set, please use the display of the actual phone set. We reserved the rights to change the mechanisms of the phone without notice.

Protect your environment! We strive to produce products in compliance with global environmental standards. Please consult your local authorities for proper disposal.

General Information

Security
Emergency call
In any country, you can dial 112 (or other emergency call number) for emergency help. Note: Based on the nature of cellular networking, the success of the emergency call cannot be guaranteed.

Safety Precautions
Before using your phone, please read the following important information to eliminate or reduce any possibility causing damage and personal injury.

Do not use wireless phones while driving.
Switch off wireless devices in aircraft.
Do not use mobile phones at refueling point. Don’t use near fuel or chemicals.
Follow regulations or rules in hospital and health care facilities. Switch phone off.
Only qualified service personnel can install or repair this device.
Use only approved accessories and batteries.
Do not expose your phone to extreme high temperatures above+60℃ (+140 F).

Battery Information
Information Charging and Discharging

The charger is designed to be used in temperatures between 0 to 40℃.
Do not charge the phone in wet and damp conditions.
We strive to produce products in compliance with global environmental standards.
When a charger is not in use, disconnect it from the power source. Do not leave the battery connected a charger for longer than 12 hours, since overcharging may shorten its life.

Tips for Battery

Do not disassemble or modify the battery by yourself.
Do not short-circuit the battery.
Do not dispose of batteries in fire.
If you smell anything strange from the battery or find that the battery is overheated, you should stop using it immediately and contact the authorized Service Center in your region.

Getting Started

Installing and uninstalling SIM card
Switch off the phone; remove the back cover, battery and other external power source. Fit the SIM card into the SIM card slot.

Charging the battery
Plug the charger into the socket on the side of your phone. Connect the charger to an AC wall socket. The blinking of the battery level icon indicates the battery is being charged. When the blinking stops, it indicates the charging is finished During charging, the phone and charger will feel warm to the touch. This is normal.

Warning:

The operating ambient temperature of the charger is 0C-50C. Do not use it when the temperature exceeds this limit.
Use only chargers approved by the phone manufacturer to ensure safety. Failing to comply with this will violate the terms and conditions of the warranty.

Connecting to the Network

SIM card
Please insert available Subscriber Identity Module (SIM) card into your phone before using it. SIM card is supplied by your network carrier. All the information related to network connection is recorded on the SIM card, so are the contact information such as names, phone numbers and SMS that you set to store on the SIM. You can take out the SIM card from the phone and insert it into another GSM phone to use it. Most new phones will recognize the SIM card automatically.

Connecting to the network
After the SIM card is unlocked, you phone will automatically search for the registered network or other local available network. Once connected, the name of the network carrier will appear on the top of the screen. You phone is now in Standby mode, ready for making and receiving call

Call logs

With this function, you can view the information of Missed calls、Dialed calls、Received calls、Rejected calls and also you can clean all these records via Delete Call Logs. Enter into any history interface, Select anyone logs, Press LSK Key to enter the Option list:

Details: View the detail of the current call.
Call: Call the current number.
Write message: Directly input the SMS and send it to the current number.
Add to contacts: save to phonebook.
Add to blacklist: Add the number to black list and block the same number to call you.
Delete: Delete the current logs.
Delete all: Delete all the current logs.

Multimedia

Camera
With this function, you can snap. Press OK Key to snap under the view-finding window. Enter Camera Option, Your options include:

Image viewer: Enter in the album folder.
More options: You can modify the DC/DV mode, Effect, Contrast, Brightness, White Balance and others.
Settings: You can select different Size, Quality, Banding and others.

DV
With this function you can record video for some interesting moments. For more information please read the Camera presentation. In video recorder, your options include:

Switch to camera: Switch to the camera interface.
Camcorder Settings: Set up the video recorder.
Video Settings: Set up the video parameters.

Image
You can view the photos snapped with the camera through this function.

Audio
You can enjoy the music with this function. You can use the following keys during the play.

Key	Function
	Left direction Key

Video
You can play the video with this function. You can use the following keys during the play.

Key	Function
	Left key

Recorder
You can take a recorder in this function. After record, access Options:

Start recording: Select this option to record the sound.
Record file List: View the currently selected sound files.
Storage: Change the file path for the sound record file.
File format: You can choose the format for record file. .AMR, or WAV

FM radio
You can listen the FM radio with this phone, also you can record the FM radio station which do you want to record.

Auto search and save: Search and save the channels.
Channel List: Play, edit or delete the saved channels.
Save: Save the current playing frequency into the channel list.
Manual search: Search the radio by manual.
Open speaker: Playing FM in loudspeaker mode. (It is active when headset is inserted only)
Background play: Return the standby interface and keep paying FM radio.
Record: Record the currently-hearing FM.
Record file List: View the recorded files list.
Help: You can get the operation guide in here.

Phonebook
You can save a phone number in the memories of SIM cards or phone. Select a contact in the contact list window and press LSK KEY to perform:

New: Create a new contact inside phonebook.
Write Message: Directly input the SMS or MMS and send it to the searched phone number.
Call: Call the current contact.
Delete: Delete the current contact.
Delete multiple: Delete all the marked contacts in one time.
Import/Export: Export the contacts from SIM card & phone memory / Import the backup from memory card.
Send vCard: Send a vCard via SMS or Bluetooth.
Others：You can check the Memory status.

Profiles
Enter in the function; display the profile mode list including Normal, Silent, Indoor and Outdoor.

Activate: Press OK key to activate the profile mode.
Settings(Customize the profile mode as follows):
Rename: Change the profile mode’s name.
Ring settings: Select the ringtone for the SIM1/SIM2. You can also select the ringtone from T card.
Adjust volume：Set the volume for Caller Volume, Message Volume, Alarm & calendar ringtone, Call volume, Power ringtone.
Ring Type: Set the ring type such as Repeat、Ascending、Beep once.
Other alert rings: Select the key tone 、battery low alert 、power ringtone and dial tone.

Note1 : After plugging in the headset, ringtone will output from the headset as well as the phone, when there is incoming call or message.

Message

You can send and receive the SMS or MMS as well as use Cell Location Display with this function.

Write message
Edit contents, Insert pictures, melody, phone number and others. Send: Insert the number of the contacts and then send SMS or MMS to this number.

Inbox / Outbox/ Drafts/Sent box
This function is used to check messages in Inbox/ Outbox/ Drafts//Sent box Templates.

Security inbox
You can create a security message inside this folder, user to open it, must need the password, the default password is “0000”

Templates
Some message templates given inside this menu.

Broadcast Messages:
Look up the broadcast messages.

Voice mail service
This is similar to the Answer machine. You may transfer the incoming call that you fail to answer duly to your Voice mail server, where the caller can leave message.

Message Settings
You can modify the SMS default Settings and check Message capacity.

Tools

Torch
Turn on or turn off the torch here.

My files
The File Manager lists the all the files stored in your memory card.

Alarm
You can set up that the alarm clock will ring at a specific time with this function.

Calculator
Press OK Key to view the calculation results. Press the up, down, left, right and OK key to select +, -, *, /, = respectively. Press Clear to delete the figure.

Calendar
The screen will highlight the date of today after displays the monthly calendar when you enter in the calendar function.
Add new schedule: Select Menu →Add new schedule→Write the schedule details →Select Store.

World Clock:
You can view the current local time of various countries.

Bluetooth

Bluetooth: Open or close the Bluetooth
Bluetooth visibility: Open or close the visibility.
Paired device: Show the device which is connected
Device name: Show off the name of Bluetooth.
Bluetooth file Storage: You can select Storage memory card.
Help: You can read some help information from it.

STK
Only SIM Card support is required in this service.

Settings

Call settings

Dual SIM: You can set your phone network status, including Standby mode, Reply by original SIM, Set SIM name.
Call divert: Divert an incoming call to a designated phone number under the presetting condition. This function can be launched or closed.
Call waiting: The network will inform you for a newly incoming call during the call. Please contact with your network operator to launch or close the function because the function requires the network support.
Call barring: Set up the right of calling and answering. This function requires the network support. You can launch or close the function.
Hide ID: Default status is Display ID by network.
Others: The settings item include Call time minute reminder, Auto redial, Vibration when connected, Reply SMS after reject and Auto record voice call.

Phone settings
You can customize your favorite phone functions based on your interest with this function.

Date & Time: You can set time, date and format for your phone.
Language settings： Set the current system language.  Shortcut settings: You can set the direction key designated menu.
Auto power on/off： The phone can power on/off according to your preset time.
Restore factory settings: You can recover the phone into the initial settings with this function. The default password is: 0000.

Display

Wallpaper settings: Set an image as wallpaper.
Idle display settings: On, it will be displayed in the standby interface.
Contrast: Adjust the displaying contrast.
Backlight: Set the backlight time.
Keypad backlight time: Set the duration for the keypad backlight.
Auto keypad lock: Set to lock the keypad.

Security
The phone lock password, SIM card password and PIN2 support 4-8 digit numbers, do not support other characters. The default password of the phone when leaving the factory is 0000. The PUK /PUK2 are required to input if you want to unlock the SIM card. The PUK/PUK2 is provided by the network operator.

PIN lock: open or close the PIN lock function. When PIN lock is launched, the PIN shall be input upon each power-on.
Modify PIN2: Input the correct PIN 2. Just can be changed.( The SIM2 security setup is same to the SIM1 security setup.)
Phone locked: Open or close the phone lock function. When the phone lock is launched, the phone lock password shall be input upon each power-on.
Modify the cell phone password: You can change the phone password.
Privacy: If you select these modules for Data security, you must input the correct password when you want to view these modules.
Lock screen by end-key: Activate, in the idle mode, you can use the power key to lock the screen.
Guard lock: You can track your phone when the phone lost; The default password is “123456”
Fixed dialing: Add the numbers for fixed dialing.
Blacklist: You can check the blacklist in here, and also can set the feature whether need to act on calling or messaging.

Connections

Network account: Choose the network settings for data account before you want to use internet.
GPRS Service: enable/disable the GPRS network.
Data connection settings: You can control the internet access as “always connect” or “Connect when needed”.
Network selection: choice the modes of searching the phone network, including Auto and Manual modes.

Apps & Games

Bookmark
Web link for Face book, Twitter and MSN.

Games

Sokoban: Game of Snake, for more information please read the game helps.
Snake: Game of Snake.
Tetris: Game of Snake.

Internet

Internet Browser.
Option: You can enter the Homepage and modify the default settings, like the Account settings.

FAQ

The phone cannot be turned on: When the battery is very low, the phone may not be turned on properly. Please charge the battery. Cannot make certain calls: Check if Call Barring is set. If it is set, you may not be able to make calls or only certain calls are allowed. My call is picked up by another phone: Check if call divert is set. If it is set, your incoming calls may be diverted to other numbers or devices.

Error Message
Please insert SIM card Make sure you have inserted SIM card. If you have installed it but it cannot be detected, please try clean the golden contacts of the SIM card by using a dry cloth. If it still is not working, please contact your network carrier.

No service
If you are in an area not covered by your network, or if a physical obstacle is present, such as in an enclosed area, the message “No service” will be displayed on your Standby screen and you will not be able to make or receive calls. You can try move closer to a window for better reception.

For emergency only :
When you are outside your network but inside other network, you can only make emergency call. Enter PUK code After three consecutive incorrect PIN code entries, the code is blocked, and you need the PUK code to unblock it. Contact your service provider.

Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.

Information to user.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Information to the user.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Absorption Rate (SAR) information:
This mobile phone meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. This device was tested for typical body-worn operations with the back of the handset kept 1.0cm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 1.0cm separation distance between the user’s body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 1.0 cm must be maintained between the user’s body and the handset,including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may notcomply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.