RENPHO RP-AP089B Air Purifier User Manual

RENPHO RP-AP089B Air Purifier

Thank you for choosing RENPHO! This air purifier brings fresh air to you whether at home or at work. Choose from low, medium, or high fan speed. Enjoy a cleaner breathing space.

Specifications

176CFM (300m3 /h)

What’s Included

Your REN PHO Air Purifier box includes
1 x REN PHO Air Purifier
1 x User Manual

Safety Information

IMPORTANT: Please read and comply with all of the instructions and warnings provided in this manual before using the product. Failure to comply with the instructions and warnings provided herein may result in inaccurate results and/or damage to the product itself.

Danger

• Do not let water or any other liquid or flammable detergent enter the appliance to avoid electric shock and/or a fire hazard.
• Do not clean the appliance with water or any other liquid or a (flammable) detergent to avoid electric shock and/or a fire hazard.

Warning

• • Check if the voltage indicated on the bottom of the appliance corresponds to the local mains voltage before you connect the appliance.
• if the mains cord is damaged, you must have it replaced by distributor, or a service center authorized by distributor or similarly qualified persons in order to avoid a hazard.
• Do not use the appliance if the plug, the mains cord or the appliance itself is damaged.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
•  Cleaning and user maintenance shall not be made by children without supervision.
• Do not block the air inlet and outlet, e.g. by placing items on the air outlet or in front of the air inlet.

Caution

• This appliance is not a substitute for proper ventilation, regular vacuum cleaning or use of an extractor hood or fan while cooking.
• If the wall socket used to power the appliance has poor connections, the plug of the appliance becomes hot. Make sure you plug the appliance into a properly connected wall socket.
• Always place and use the appliance on a dry, stable, level and horizontal surface.
• Leave at least 40cm free space behind and on both sides of the appliance and leave at least 40cm free space above the appliance.
• Do not place anything on top of the appliance and do not sit on the appliance.
• Do not place the appliance directly below an air conditioner to prevent condensation from dripping onto the appliance.
• Make sure all filters are properly installed before you switch on the appliance.
• Only use the original filters specially intended for this appliance. Do not use any other filters.
• Avoid knocking against the appliance (the air inlet and outlet in particular) with hard objects.
•  Always lift or move the appliance by the handle at the back of the appliance.
•  Do not insert your fingers or objects into the air outlet.
• Do not use this appliance when you have used indoor smoke-type insect repellents or in places with oily residues, burning incense or chemical fumes.
• Do not use the appliance near gas appliances, heating devices or fireplaces.
• Always unplug the appliance after use and before you clean it.
•  Do not use the appliance in a room with major temperature changes, as this may cause condensation inside the appliance.
• The appliance is only intended for household use under normal operating conditions.
• Do not use the appliance in wet surroundings or in surroundings with high ambient temperatures, such as the bathroom, toilet or kitchen.
• The appliance does not remove carbon monoxide (CO) or radon (Rn). It cannot be used as a safety device in case of accidents with combustion processes and hazardous chemicals.
• To prevent radio interference, the appliance should be kept at least 2 meters away from any device that uses radio waves.

Product Structure

1. Touch-Control Panel
2. Night Light
3. Air Outlet
4. Upper Body
5. Power Cord
6. Air Inlet
7.  H13 True HEPA5-stage Filter
8. Base Cover

Before First Use

Placing the filters
The appliance comes with all filters fitted inside, Please take off packing of the filter before use. Remove all filters, unpack them and place them back into the appliance as described below.
Note: Make sure you insert the filters in the correct position.

1. Put the appliance upside down on a soft cloth to avoid scratching. To open the base cover, you need to find an arrow point ! on the base cover corresponding the LOCK position. Turn the base cover counterclockwise
   from LOCK to OPEN position, then the lock is released.

2. Remove the base cover and take out the new filter.

3. Remove the Plastic Packaging from the filter.

4. Put the filter back into the appliance.

5. Turn the base cover clockwise from OPEN position to LOCK position. You will hear a “click” sound. The base cover is fastened.

Using The Appliance

About the control panel

1. Put the plug in the wall socket
   All lights will turn on once and you hear a beep, then all lights stay OFF.

2. Press the power button to switch on the appliance.
   Press@ button, Night light turns on and Speed runs on level 2 (Med) .

3. Fan speed adjustment
   The fan speed light indicates at which fan speed the appliance is operating. Press Speed button to adjust fan speed level. There are four levels
   1 ~4 refers to Low, Medium, High and Turbo .
   Tips: When the appliance is switched on, the fan speed is at the medium level.

4. Sleep mode
   When you use the appliance in Sleep Mode, it works very quietly. Only the 0 and
   buttons (If setting the timer) will be at half brightness, and all other buttons’ lights will be off. Press any other buttons(except 0 and ,, buttons ) to exit the sleep mode.

5. Auto mode
   At Auto mode, the fan speed will be automatically adjusted according to AQ level as below:AQ Color| Blue| Green| Orange| Red
   ---|---|---|---|---
   Air Quality| Very good| Good| Bad| Polluted
   Speed at Auto mode| 1 (Low)| 2(Medium)| 3(High)| 4{Turbo)

6. Air Quality Sensor Light / Night Light
   There is an air quality sensor inside the air purifier.
   Air Quality Sensor Light {AQ Light)
   Air Quality Light Color will automatically change according to the air quality being detected.

7.  Press the @ once to enter air quality display mode, and press again to exit.

8.  Long press @ button for 3 seconds, turn on the breathing mode, and long press 3 seconds, turn off it.
   RED = POLLUTED ; ORANGE = BAD ; GREEN = GOOD ; BLUE = VERY GOOD
   Note: Compared with professional instruments, the detecting resut of this air quality sensor may has tolerance inaccuracy, we suggest you regard the sensor detecting result as a reference only.
   Night Light Mode (Machine Standby Status)
   Enter the Night Light Mode:
   Night color is orange and cold-white. Press @ button to turn on the night light,the light is orange, half-light, and you will hear a “beep” sound. Then press @ button again, night light is cycling in order by fully bright ➔ cold white, half-bright➔ fully bright ➔ turn off➔ orange, half-bright. ..

9. Setting timer

10. Press 0 to turn on or off the timer, and to cycle through timer options (2 hours, 4 hours, 6 hours or 8 hours).

11. The air purifier will automatically power off once the timer is finished. NOTE: Pressing 0 or unplugging the air purifier will cancel the timer.

12. Keylock mode

13.   Press and hold  button for 3 seconds to activate Keylock mode. All buttons are locked at this mode; If your house has young child, we suggest using this mode.

14. To cancel the key lock mode, just press and hold button for 3 seconds.

15. . Filter replacement light
    When indicator , lights, it means that you should check the filter if it needs to be cleaned or replaced.
    Note: The filter’s lifetime is based to your house air quality and using time. Using the appliance in a humid environment will reduce the lifetime of the filter.

16.  Memory Function
    When the air purifier is plugged in, it will remember its previous fan speed setting.

Filter Replacement

When Should I Replace the Air Filter?
It is recommended to change the air filter every 6-8 months. However, you may need to change your filter sooner or later depending on how often you use your air purifier and your house air quality. It is important to watch out for the following signs of an expired filter:

• Increased operating noise
• Decreased airflow
• Clogged filter
• Increased presence of odors

NOTE:

•  The environment in which the air purifier is being used may also extend or shorten the lifetime of the air filter. Using your air purifier in an environment of relatively high pollution may mean you will need to change the air filter more often.

• If the air pollution in your environment is very high, there is a possibility that the filters may not be completely effective and may need to be replaced before
  ,, lights up.

•  Remember to reset the air purifier after changing the air filter.

• Using the appliance in a humid environment will reduce the lifetime of the activated carbon filter and HEPA filter.
  Tip: Only use Official RENPHO replacement parts to maintain product performance.(Search for: RP-AP089-F1/F2)

How to replace the Air Filter?

1. 1. Switch off the appliance and unplug it. (a)

2. Put the appliance upside down on a soft cloth to avoid scratching. To open the base cover, you need to find an arrow point ! on the base cover corresponding the LOCK position. Turn the base cover counterclockwise from LOCK to OPEN position, then the base cover is released. (b)

3. Remove the old filter. (c)

4. Remove the packaging material of the new filter. (d)

5. Put the new filter back into the appliance. (e)

6. Turn the base cover clockwise from OPEN position to LOCK position. You will hear a “click” sound. The base cover is fastened. (f)

7. Put the plug in the wall socket and switch on the appliance again. (g)

8. Reset Filter’s lifetime.
   After replacing the filters, when you switch on the appliance,’ ‘ the replace filter light still lights up. You need to reset the filter ‘s lifetime sensor, so that the appliance can calculate the filters’ lifetime.

9.  Plug in the air purifier and turn it on.

10. Press and hold ‘ ‘ for 3 seconds.

11. Release ‘ ‘ and the light will turn off, indicating that the reset is complete.

Filter Replacement Force Mode

When you use the air purifier in an environment of heavy pollution, the lifespan of the air filter may be significantly reduced. You can change the filters even if ,, does not light up. Follow the steps below to perform a hard reset.

1. Replace the air filters as mentioned in the Filter Replacement section.
2. Plug in the air purifier and keep in standby mode.
3. Press and hold ‘ ‘ for 3 seconds, and it will light up.
4.  Press and hold, again for 3 seconds, and it will turn off. The reset is now complete.

Clean Air Purifier
In order to keep your purifier working with more efficiency and life-time, clean the filter (pre-filter side only) every 2 weeks following the Instruction Below:

1. . Clean out any dust, hair, or furs remaining on the pre-filter by using the vacuum hose.
2.  Clean out any dust, hair, or furs remain on the bottom cover by using the vacuum hose.
3.  DO NOT wash the filter with any water or liquid.

Storage
Unplug the power cord, then wipe the machine clean, put the appliance in the packing bag, and then put it in a dry place.

Environment
Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment.

Troubleshooting

This chapter summarizes the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, contact us directly via e-mail at: support@renpho.com or phone:
+1(844) 417 0149

Warranty Information

REN PHO provides 1-Year warranty for all products to be of the highest quality in material, craftsmanship, and service, effective starting from the date of purchase.

Terms & Policy
REN PHO will replace any product found to be defective due to manufacturer flaws based on eligibility. Refunds are available within the first 30 days of purchase. Refunds are only available to the original purchaser of the product.
This warranty only to personal use and does not extend to any product that has been used for commercial, rental, or any other use in which the product is not intended for. There are no warranties other than the warranties expressly set forth with each product. This warranty is non-transferable. REN PHO is not responsible in any way for any damages, losses or inconveniences caused by equipment failure or by user negligence, abuse, or use noncompliant with the user manual or any additional safety, use,
or warnings included in the product packaging and manual.
This warranty does not apply to the following:

• Damage due to abuse, accident, alteration, misuse, tampering or vandalism.
• Improper or inadequate maintenance.
• Damage in return transit.
  REN PHO assumes no liability for damage caused by the use of the product other than for its intended use or as instructed in the user manual.

Defective Products & Returns Should your product prove defective within the specified warranty period, please contact Customer Support via support@renpho.com with your ORDER NUMBER.

Customer Service

We have an award-winning warranty, exchange, and customer service team that guarantees hassle-free solutions to any issue you might have within 24 hours.
Email: support@renpho.com TEL: +1(844) 417 0149 (US)

Monday-Friday 9:00AM-4:30PM

Web: www.renpho.com

Shenzhen Runfeng Digital Technology Co., Ltd.

Chuanghui Building, Intersection of Banxuegang Boulevard and Yongxiang Road, Bantian Subdistrict, Longgang District, Shenzhen, China

JOICOM CORPORATION

14129 The Merge Street, Building 3 Unit A, Eastvale, CA 92880

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>