B Mobile Hk 10-032 Mobile Phone User Manual

June 5, 2024
B Mobile Hk

B Mobile Hk 10-032 Mobile Phone

B-Mobile-Hk-10-032-Mobile-Phone

Preface

Follow all safety warnings to avoid injury or property damage.

Important Security Information

  1. Risk of explosion if battery is replaced by an incorrect type.
  2. Prohibited putting the battery into the fire,or otherwise the battery will explode.
  3. Please use the adapter and the battery dedicated to or authorized for the phone
  4. The device complies with RF specifications when the device used at 5mm from your your body.
  5. Adapter:The plug considered as disconnect device of adapter Input: AC 100-240V, 50/ 60Hz, 0.2A,Output: 5V 500mA
  6. Adapter shall be installed near the equipment and shall be easily accessible.
  7. EUT Operating temperature range: -10° C to 40° C

Kgtel hereby declares that this GSM Mobile Phone is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. This product is allowed to be used in all EU member states.

Introduction

Key Function
Call Key Make or answer a call to Sim1 & Sim2

View Calls Logs in standby mode.

End/Power

Key

| Pressing and holding to turn the phone on/off. End a call or reject an incoming call.

Return to the idle mode.

Left Soft Key| Menu key and OK key for functions
Right Soft Key| Access the Name list in idle mode.

Return to the previous menu.

OK Key| Press to enter main menu in idle mode.

After inputting numbers, press this key to do options.

Numeric key| Enter numbers, letters or characters.

Select a submenu item labeled with the corresponding number.

In idle mode, press and hold 0 key to turn on/off power bank function.

| Press to toggle between , +, (pause character) P, and (wait character) W.

Press to enter symbol when editing text.

| Press to switch input modes when entering text.

Press and hold to change sound profiles to Silent Mode and General mode.

Getting Started

Turning the phone on
To turn the phone on, press and hold the Power key. If you have already enabled the Sim Lock function then enter the PIN code (the 4 to 8 digit secret code of your SIM card). It is preconfigured and provided to you by your network operator or retailer. If you enter an incorrect PIN code 3 times in succession, your SIM card will be locked. To unlock it, you must obtain the PUK code from your network operator.

3.2 Charging the Battery
Ensure the battery is inserted in the handset.
The battery symbol indicates the charging status. While charging, the charge indicators will scroll. When all the scroll bars are steady, the battery is fully charged. It takes about 4 hours to fully charge the battery.

Important Password
Phone lock password is 1234.

Keypad Lock and Unlock
Go to Settings>Security Setting>Auto Keypad Lock to select the time for keypad lock. In standby interface, if the time expires, the keypad will be locked automatically.
Lock: press LSK then key in standby interface.
Unlock: press LSK and then press
key in standby interface.

Making an International Call

  • Press the ‘*’ Key twice until “+” appears on the screen.
  • Enter the country code.
  • Enter the area code (normally without the 0 before it) followed by the phone number.
  • Press the Dial Key to call the number

Safety Information and Notices

Before using the phone, please read the safety precautions carefully and let your children know these, so that you can use your phone correctly and safely.

Do not switch on your phone when phone use is prohibited or when phone use may cause interference or

danger.


Do not use your phone while driving.
Follow the rules or regulations in hospitals and health care facilities. Switch off your phone near medical

equipments

Switch off your phone in an aircraft. The phone may cause interference to control signals of the aircraft.
Switch off your phone near high-precision electronic devices. The phone may affect the performance of these

devices.

Do not attempt to disassemble your phone or its accessories. Only qualified personnel are allowed to service or repair the phone.
Do not place your phone or its accessories in containers with strong electromagnetic field.
Do not place magnetic storage media near your phone. Radiation from the phone may delete the information

stored on them.

Do not put your phone in a high-temperature place or use it in a place with flammable gas such as a gas

station.

Keep your phone and its accessories away from children. Do not allow children to use your phone without

guidance.

Use approved batteries and chargers only to avoid explosion.

FCC Statement

  1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
  2.  This device may not cause harmful interference.
  3. This device must accept any interference received, including interference that may cause undesired operation.
  4. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

SAR Information Statement
Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.

Tests for SAR are conducted with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model.

The highest SAR value for this model phone when tested for use at the ear is 0.683W/Kg and when worn on the body, as described in this user guide, is 1.178W/Kg(Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID: ZSW-10-032 Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Asso-ciation (CTIA) web-site at http://www.wow-com.com. * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a sub-stantial margin of safety to give additional protection for the public and to account for any variations in measurements.

Body-worn Operation

This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals