Bluestone EB1 uBuds Bluetooth Earbuds User Manual
- June 6, 2024
- Bluestone
Table of Contents
EBl
Bluetooth Earbuds
User Manual
PRODUCT OVERVIEW
Making and receiving calls
| Answer call | Press |
|---|---|
| Enda call | Press |
| Reject call | Press and hold for2 seconds |
| Redial the last call | Quickly press 2 times |
Listening to music
| Play music | Press |
|---|---|
| Pause/resume music | Press |
| Go to the next song | Press and hold |
| Go to the previous song | Press and hold |
| Power oN/Off | Press and hold |
| Changing the Volume- | Press or |
SPECIFICATIONS
| Bluetooth Version | Bluetooth V4.2 |
|---|---|
| Distance | Up to 49ft (15m) |
| Battery | Rechargeable lithium battery: 60 mAh |
| Frequency | 2.4GHz |
| Standby Time | Up to 18 hours |
| Charging Time | 1 hour |
| Talk Time | up to 5 hours |
| Play Time | up to 5 hours (medium volume) |
| Input | 80mA/ 5V |
CHARGING THE EARBUDS
- These earbuds have an internal rechargeable battery.
- The battery must be fully charged prior to use.
- Charging time is approximately 1 hr.
- Your earbuds cannot be used while being charged
Using the provided Micro USB cable:
- Connect the Micro USB Cable to the Micro USB Port on the side of the Controller
- Connect the USB cable to your USB Port
PAIRING THE EARBUDS TO YOUR BLUETOOTH DEVICE
-
Enable the Bluetooth function on your device
-
Keep the earbuds within 3 feet of your Bluetooth device. (While pairing only)
-
Turn on the Bluetooth headphones by pressing the multifunction button for 1 second.
(The sound “Power ON” will play through the earbuds while the indicator light flashes.) -
Use your device’s Bluetooth interface to search for the earbuds.
-
After approximately 2 seconds “Bluestone EB1” will appear on your device’s list of pairable signals.
-
Select “Bluestone EBI” from the list.
(The sound “Pairing” will play through the earbuds while the indicator light flashes.) -
After a successful connection, the earbud’s indicator light will flash once every 8 seconds
FAO
- In order to save power, the earbuds will automatically switch off if no device connection is made within 1 O minutes
- Make sure your device is fully charged before using it for the first time. Your device can not be turned on if the battery level is very low
- Check the connection between your device with phone or computer. If the connection is not established, please reconnect again. And adjust the volume level to a suitable level
IMPORTANT SAFEGUARDS
- Do not use this unit for anything other than its intended use
- Keep the unit away from the heat source, direct sunlight, humidity, water, or any other liquid.
- Do not expose the device to extremely high or low temperatures, as it may damage the battery
- Do not operate the unit if it has been wet or moist to prevent electric shock and/or injury to yourself and damage to the unit
- Do not use the unit if it has been dropped or damaged in any way
- Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
- Keep the unit out of reach of children
- This unit is not a toy.
BATTERY DISPOSAL·
This product contains a lithium polymer battery. Lithium polymer batteries are
environmentally safe when fully discharged. Please refer to your local and
state laws for battery disposal procedures
©SM TEK GROUP INC, All rights reserved.
BlueStone is a trademark of SM TEK GROUP INC.
New York, NY 10001
www.smtekgroup.com
1 Year Limited Warranty
Please Email cs@smtekgroup.com
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>