SwanScout 703A Multifunctional Wireless Charging Dock User Manual
- August 26, 2024
- SwanScout
Table of Contents
SwanScout 703A Multifunctional Wireless Charging Dock
Product Overview
Before using this product, please read this user manual thoroughly and take good care of it.
Product Compatibility
- Please refer to the website’s images or text descriptions for information on specific compatible types of phones, earbuds charging cases, and watches.
Product Instructions
- Before use, please correctly unfold the wireless charging areas for the phone, watch and earbuds case.
- Note: When folding or unfolding the product, refrain from forcefully rotating the wireless charging areas to prevent any potential damage to the product.
- Place your phone, watch and earbuds charging case on the corresponding wireless charging area to charge.
- Check the indicator lights and adjust the device’s position accordingly if it cannot charge properly.
Product Using Instructions
Charging indicator guide
Charging status| Plugged in| Charging| Fully charged| Abnormal objects
detected| Standby
---|---|---|---|---|---
Indicator light| On for 3 second| Green light| Green light| Red light flashes|
OFF
Attention
- It may not be feasible to charge all three devices (the phone, the earbuds charging case and the watch) simultaneously if you don’t use a charger, higher than 18W power. We recommend using products that comply with quality and safety standards.
- If you prefer wearing a case for your phone, please make sure it’s a MagSafe-compatible phone case. For a better charging experience, you could charge without any phone case.
- To ensure that the charging station works properly, the phone case should not exceed 5 mm, the case of the earbuds should not exceed 4 mm, and the watch should be closely attached to the charging area.
Specification
- Input: 9V 2A
- Charging watch output: 2.5W (Max)
- Charging phone output: 10W (Max)
- Charging earbuds output: 3.5W (Max)
Safety Information
Warning
- Do not disassemble or change the internal structure of this product by yourself to avoid danger.
- Please use this product in the temperature range of 0°C-40°C (32 °F-104 °F). Do not use this product in high temperature and humid place to avoid equipment failure.
- Do not place metallic foreign objects in the wireless charging area.
- Do not throw this product into the fire, otherwise may cause the equipment to catch fire or explode.
- This product contains sensitive electronic components, including a battery, and can be damaged, impair functionality, or cause injury if dropped, burned, punctured, crushed.
- Do not expose this product to high temperature or around heat generating devices such as heaters, microwave ovens, ovens, etc.
- Do not allow children or pets to swallow this product to avoid injury or other hazards.
- Radio waves generated by this product may interfere with pacemakers, defibrillators, or other medical devices. Maintain a safe distance of separation between your medical device and this product. Consult your physician and medical device manufacturer for information specific to your medical device. Stop using this product if you suspect it is interfering with your pacemaker, defibrillator, or any other medical device.
- Please comply with local regulations for the disposal of this product and its accessories, and support recycling operations.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
Warning
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IC Statement
- This device complies with RSS-216 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.
RSS-Gen Issue 5 March 2019
This device contains licence-exempt transmitter (s)/receiver (s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that maycause undesired operation of the device.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF exposure statement:
- The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment.
- This equipment should be installed and operated With minimum distance 20cm between the radiator and your body.
For more product information, please visit:
www.swanscout.com
For customer support, please contact:
support@swanscout.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>